Abstract:Lithium sulfide (Li2S) with a high theoretical specific capacity of 1166mAh g(-1) is a promising cathode material for next-generation Li-S batteries with high specific energy. However, low conductivity of Li2S and polysulfide dissolution during cycling are known to limit the rate performance and cycle life of these batteries. Here, we report on the successful development and application of a nanocomposite cathode comprising graphene covered by Li2S nanoparticles and protected from undesirable interactions with electrolytes. We used a modification of our previously reported low cost, scalable, and high-throughput solution-based method to deposit Li2S on graphene. A dropwise infiltration allowed us to keep the size of the heterogeneously nucleated Li2S particles smaller and more uniform than what we previously achieved. This, in turn, increased capacity utilization and contributed to improved rate performance and stability. The use of a highly conductive graphene backbone further increased cell rate performance. A synergetic combination of a protective layer vapor-deposited on the material during synthesis and in situ formed protective surface layer allowed us to retain ∼97% of the initial capacity of ∼1040 mAh gs(-1) at C/2 after over 700 cycles in the assembled cells. The achieved combination of high rate performance and ultrahigh stability is very promising.

One-pot Facile Synthesis of CuS/graphene Composite As Anode Materials for Lithium Ion Batteries

One-Pot Synthesis of High-Performance Tin Chalcogenides/C Anodes for Li-Ion Batteries

One-Pot Synthesis and High Electrochemical Performance of CuS/Cu1.8S Nanocomposites as Anodes for Lithium-Ion Batteries

Large-scale synthesis and application of SnS2–graphene nanocomposites as anode materials for lithium-ion batteries with enhanced cyclic performance and reversible capacity

CuO/graphene composite as anode materials for lithium-ion batteries

Development of Monodispersed MnCO3/graphene Nanosheet Composite As Anode for Lithium-Ion Battery by Hydrothermal Synthesis

Nanosulfur/polyaniline/graphene composites for high-performance lithium–sulfur batteries: One pot in-situ synthesis

Facile Preparation of One-Dimensional Hollow Tin Dioxide@carbon Nanocomposite for Lithium-Ion Battery Anode

Facile One-Pot Synthesis of Ultrathin NiS Nanosheets Anchored on Graphene and the Improved Electrochemical Li-storage Properties

Synthesis and Electrochemical Performances of Cobalt Sulfides/graphene Nanocomposite As Anode Material of Li-ion Battery

Preparation of Advanced CuO Nanowires/Functionalized Graphene Composite Anode Material for Lithium Ion Batteries

Facile Hydrothermal Synthesis of Sncos4/Graphene Composites with Excellent Electrochemical Performance for Reversible Lithium Ion Storage

One-pot synthesis of small-sized Ni3S2 nanoparticles deposited on graphene oxide as composite anode materials for high-performance lithium-/sodium-ion batteries

Graphene-Li2S-Carbon Nanocomposite for Lithium-Sulfur Batteries

L-Cysteine-Assisted Hydrothermal Synthesis of Nickel Disulfide/Graphene Composite with Enhanced Electrochemical Performance for Reversible Lithium Storage

One-Pot High Temperature Hydrothermal Synthesis Of Fe3o4@C/Graphene Nanocomposite As Anode For High Rate Lithium Ion Battery

In Situ Growth of CuO Nanoparticles on Graphene Matrix As Anode Material for Lithium-Ion Batteries

Graphene/Heterojunction Composite Prepared by Carbon Thermal Reduction as a Sulfur Host for Lithium-Sulfur Batteries

Sn and SnO2-graphene composites as anode materials for lithium-ion batteries

One-step synthesis of nano-S/C@PANI composites for lithium-sulfur batteries with high rate and long lifespan

Synthesis of copper naphthalocyanine/graphene oxide composites as anode materials for lithium-ion batteries