Abstract:Using tert-butyl peroxy-2-ethyl hexanoate (TPRO) as initiator,the vinyl acetate (VAc) bulk grafting polymerization in the presence of polyethylene glycol (PEG) to get the PEG-g-PVAc was studied. The time evolution of polymerization rate,grafting ratio,grafting efficiency and molecular weight of the grafted copolymer were investigated respectively for various weight ratios of VAc to PEG. The results show that,with increasing VAc?PEG ratio,the polymerization rate and final conversion ratio are both enhanced,and an observable automatic acceleration phenomenon begins to appear. The overall reaction rate coefficient K increases with reaction time at higher VAc:PEG ratio,while a tendency of decrease of K with reaction time at lower VAc:PEG ratio was observed. At almost all VAc:PEG ratios,the grafting ratio was found to increase linearly with the conversion ratio,and the grafting efficiency keeps almost unchanged throughout the whole conversion. The grafting ratio is in proportion to VAc:PEG ratio,while the grafting efficiency is generally very high and can reach above 95% at low VAc?PEG ratio. Although the PEG grafted efficiency increases with both monomer consumption and rising VAc?PEG ratio,the overall PEG grafted efficiency is low,it indicates that a great amount of undrafted PEG exists. The phenomenon of high VAc grafting efficiency accompanying with low PEG grafted efficiency indicates that the 'Graft From' polymerization system may undergo a 'Graft Onto' mechanism. According to the definition,the PEG-g-PVAc number-average molecular weights were calculated,and the results show that the number-average molecular weights reduce at first with the increase of conversion ratio,and then approach to a constant; the higher the VAc?PEG ratio,the higher the number-average molecular weight. Via GPC analysis and PVAc universal calibration,the PDI (polydispersity index) of the grafted copolymer was determined to be between 1.5 ～ 2.5 and it aggrandizes with the increase of VAc concentration and conversion. It might be considered that,all these phenomena are related to the gel effect in the polymerization system.

Reversible Addition‐fragmentation Chain Transfer Polymerization of Vinyl Acetate under High Pressure

Synthesis Of Random And Block Copolymers Of Vinyl Chloride And Vinyl Acetate By Raft Miniemulsion Polymerizations Mediated By A Fluorinated Xanthate

Synthesis of Poly(vinyl Chloride)-B-poly(ethylene Glycol)-B-poly(vinyl Chloride) Block Copolymers by Reversible Addition-Fragmentation Chain Transfer Polymerizations

Kinetic Study of Vinyl Acetate Graft Polymerization on PEG

Solution and Aqueous Miniemulsion Polymerization of Vinyl Chloride Mediated by a Fluorinated Xanthate

Ab Initio Emulsion RAFT Polymerization of Vinylidene Chloride Mediated by Amphiphilic Macro‐raft Agents

Macromol. React. Eng. 4/2008

"Living"/controlled Radical Polymerization of Vinyl Acetate

Synthesis of Well-Defined Polystyrene with Molar Mass Exceeding 500 kg/mol by RAFT Emulsion Polymerization

Study on Kinetics of Controlled/living Radical Polymerization of Acrylonitrile by RAFT Technique

Functional and Surface-Active Membranes from Poly(vinylidene Fluoride)-Graft-poly(acrylic Acid) Prepared Via RAFT-mediated Graft Copolymerization.

Surface Photografting Polymerization of Vinyl Acetate (vac), Maleic Anhydride, and Their Charge Transfer Complex. I. VAc(1)

Straightforward Synthesis of Poly(Vinyl Acetate)‐b‐Polystyrene Copolymers Through Sequential Reversible Addition−Fragmentation Chain‐Transfer (RAFT) Polymerization: A Case Study With a Commercially Available Iniferter Agent

Synthesis of Well-Defined Poly(vinyl Acetate)-B-polystyrene by Combination of ATRP and RAFT Polymerization

Investigation on the synthesis of PVAc with low molecular weight and its philicity for CO 2

Surface Photografting Polymerization of Vinyl Acetate (vac), Maleic Anhydride, and Their Charge Transfer Complex. II. VAc(2)

Surface Photografting Polymerization of Vinyl Acetate (vac), Maleic Anhydride (mah), and Their Charge Transfer Complex (ctc). Iii. Vac(3)

The Reversible Addition-Fragmentation Chain Transfer (RAFT) Miniemulsion Polymerization of Vinyl Acetate Mediated by Xanthate

Suppressing the Long‐chain Branching in the Synthesis of Poly(styrene‐b‐butyl Acrylate‐b‐styrene) in RAFT Emulsion Polymerization by Tuning the Interfacial Properties

A facile approach to surface graft vinyl acetate onto polyolefin articles

Surface Photograft Polymerization of Vinyl Acetate on Low Density Polyethylene Film. Effects of Solvent