Abstract:Dielectric barrier discharges, particularly micro cavity plasma arrays, offer significant potential for plasma-catalytic research due to their ability to ignite plasma in direct contact with a catalytic surface, enabling the observation of plasma-surface interactions. A key factor in their application is the generation of reactive species, such as atomic oxygen, within the cavities. These species can interact with both, the surface (e.g., for activation or cleaning) and the gas being treated (e.g., for oxidation). Given the central role of oxygen atoms in plasma catalysis and their use as a model for more complex species, this work investigates the transport of these atoms out of the cavities. Two-photon absorption laser induced fluorescence (TALIF) spectroscopy with picosecond resolution is performed in the volume above the cavities. The results are compared with a basic diffusion model. The reactor operates with a He/O 2 mixture at a flow rate of 1 slm and atmospheric pressure. Densities of up to 10 16 cm -3 are measured near the surface. Time-dependent measurements show that, at a distance of 350 μm from the surface, a density equilibrium is reached within less than 3 ms of reactor operation. Decay times due to ozone formation after the reactor is turned off are on a similar scale. Spatially resolved measurements show that the oxygen density decreases exponentially from the surface but remains detectable up to approximately 1 mm above the surface, indicating significant application potential. Variations in the O 2 admixture show a density maximum at 0.4%, confirming previous helium state enhanced actinometry measurements within the cavities.

Plasma Process. Polym. 9/2012

Main Species and Physicochemical Processes in Cold Atmospheric‐pressure He + O2 Plasmas

Ouside Cover Picture: Plasma Process. Polym. 11/2019

Outside Front Cover Picture: Plasma Process. Polym. 12/2020

Numerical Study of Singlet Delta Oxygen (o2(a1δg)) Generation and Transport in the He/O2 Atmospheric Pressure Plasma Jet

A Dominant Role of Oxygen Additive on Cold Atmospheric-Pressure He + O2 Plasmas

The Dominant Role of Oxygen Concentration in He&#x002B;O<inf>2</inf> Atmosp Heric-Pressure Cold Plasmas

The formation of atomic oxygen and hydrogen in atmospheric pressure plasmas containing humidity: picosecond two-photon absorption laser induced fluorescence and numerical simulations

The Effect of Three Different Methods of Adding O2 Additive on O Concentration of Atmospheric Pressure Plasma Jets (Appjs)

Dense Plasma Opacity from Excited States Method

Research on the Atomic Emission Spectroscopy of Atmospheric Pressure Plasma Process

Measurement of atomic oxygen densities using TALIF on a dielectric barrier discharge: Insights into the volume above a micro cavity plasma array

Outside Front Cover: Plasma Process. Polym. 5/2022

Inside Front Cover: Plasma Process. Polym. 4/2021

Effect of Additive Oxygen on the Interaction of a Helium Atmospheric Pressure Plasma Jet with a Dielectric Surface

Outside Front Cover: Plasma Process. Polym. 1/2024

Modeling Plasma-based CO2 and CH4 Conversion in Mixtures with N-2, O-2, and H2O: the Bigger Plasma Chemistry Picture

Plasma–liquid Interactions: an Experiment and Simulation Study on Plasma Dynamic Behaviors Near the Gas–liquid Interfacial Layer

Investigation of a Plasma Delivery System for Optical Figuring Process

Plasma Polymerization at Atmospheric Pressure with a New Type of DBD Reactor for Combinatorial Studies: Classification of Precursor Concentration Dependencies

Modeling of the Distinctive Ground-State Atomic Oxygen Density Profile in Plasma Needle Discharge at Atmospheric Pressure*