Abstract:Low-temperature anion exchange membrane-based direct ammonia fuel cells (DAFCs) have emerged as an effective alternative to hydrogen for transportation applications because ammonia has the advantages of low source-to-tank energy cost and easy storage and distribution. The crucial aspect for their progress lies in the development of anion exchange polymeric membranes (AEMs) with high ionic conductivity, excellent stability and low ammonia permeability. In this study, we have designed and synthesized fluorinated polymeric membranes based on poly(arylpiperidine) (PAP) through copolymerization of P-terphenyl, N-methyl-4-piperidone, and 2,2,2,4-tetrafluoroacetophenone (4FTP) for DAFCs. The fluorine content of the PAP can be adjusted by varying the ratio of N-methyl-4-piperidone to 2,2,2,4-tetrafluoroacetophenone (PAP-4FTP). Four polymer membranes with different fluorine contents have been fabricated and evaluated to optimize the ionic conductivity, mechanical properties and ammonia permeation. The highly hydrophobic fluorinated comonomer enhances phase separation, leading to the formation of interconnected hydrophilic channels for anion transport. The origin of the dissociative ion groups from N-methyl-4-piperidone implies that an excessively high fluorination ratio may diminish the ion exchange capacity and consequently reduce ion conductivity. The synthesized AEMs exhibit an optimal comprehensive performance at a fluorine monomer ratio of 15, which exhibit high conductivity (>160 mS cm(-1) at 80 degrees C), exceptional dimensional stability (swelling ratio <20% at 80 degrees C), superior mechanical properties (tensile strength >40 MPa), and outstanding chemical stability (>1600 h in 2 M KOH at 80 degrees C). Additionally, the AEMs can significantly reduce the permeation of ammonia. The DAFCs employing the AEMs can achieves an ultrahigh peak power density (PPD) of 153.36 mW cm(-2) in which nonprecious Mn-Co/C serves as the cathode catalyst and Pt-Ir/C as the anode catalyst. This work suggests that the improvement of DAFCs performance can be achieved by the mitigated ammonia crossover through the design of fluorinated polymeric membranes.

Plasma Process. Polym. 11/2011

Plasma Process. Polym. 5/2010

Plasma-Grafted Alkaline Anion-Exchange Membranes Based on Polyvinyl Chloride for Potential Application in Direct Alcohol Fuel Cell

Plasma-polymerized alkaline anion-exchange membrane: Synthesis and structure characterization

Pulsed Plasma-Polymerized Alkaline Anion-Exchange Membranes for Potential Application in Direct Alcohol Fuel Cells

Plasma Deposition of Polymer Electrolyte Membrane for Proton Exchange Membrane Fuel Cell (PEMFC) Applications

Plasma Techniques for the Fabrication of Polymer Electrolyte Membranes for Fuel Cells

Novel Cross-Linked Anion Exchange Membranes with Diamines As Ionic Exchange Functional Groups and Crosslinking Groups

High-Performance Fluorinated Poly(aryl Piperidinium) Membranes for Direct Ammonia Fuel Cells

Plasma Technology Applications in Proton Exchange Membrane Fuel Cell Systems

Synthesis of Membrane-Electrode Assembly for Fuel Cells by Means of (Sub)-Atmospheric Plasma Processes

A novel anion exchange membrane of three aromatic units copolymer for fuel cells

Optimization and Synthesis of Plasma Polymerized Proton Exchange Membranes for Direct Methanol Fuel Cells

Microphase Separated Hydroxide Exchange Membrane Synthesis by a Novel Plasma Copolymerization Approach

A Novel Methodology to Synthesize Highly Conductive Anion Exchange Membranes

A green approach for preparing anion exchange membrane based on cardo polyetherketone powders

Plasma Process. Polym. 3/2011

Polyarylene-Based Anion Exchange Membranes for Fuel Cells

High Performance Anion Exchange Membranes with Confined Sub‐2‐nm Ion Channel

Plasma-grafted Anion-Exchange Membrane Preparation and Process Analysis

Polybenzimidazole-Based High-Temperature Polymer Electrolyte Membrane Fuel Cells: New Insights and Recent Progress