Abstract:Self-healing coatings doped by nano-containers loaded with inhibitors have shown remarkable anti-corrosion efficiency and durability in extending metal life and slowing down coating failure. However, low loading capacity of corrosion inhibitors in nano-containers is a problem plaguing the further development and application of smart coatings. In this study, mesoporous silica with large pore sizes (MSN) was synthesized using the soft template method which significantly increased the loading capacity of the corrosion inhibitor, and a smart self-healing composite coating was designed, which could protect carbon steel from corrosion and provide durable protection for it. Specifically, the composite coating (EP/DMTD@MSN-PAA) was prepared by incorporating mesoporous silica nano-containers embedded with 2,5-dimercapto-1,3,4-thiadiazole (DMTD) molecules into the epoxy resin coating. The results of BET test showed that the prepared MSNs had high specific surface area (734.97 m2/g) and large pore volume (0.85 cm3/g). The thermogravimetric (TG) analysis showed 35.7% of loading amount of corrosion inhibitors in the nano-materials. Response release experiments showed that the DMTD@MSN-PAA had of acid-response release characteristics. When pH value of the system decreased from 7 to 3, the release amount of the DMTD molecules increased from 40.3% to 93.7%. The contact angle test showed that the epoxy resin (EP) coating had a contact angle value of 57.7°, while those of the composite coatings doped with 1 wt%, 3 wt% and 6 wt% DMTD@MSN-PAA (EP/DMTD@MSN-PAA) were 65.1°, 75.2° and 67.2°, respectively. These results indicated that the composite coatings had better hydrophobicity compared to the EP coating, and were conducive to prolonging the coating service time. The anti-corrosion performances of both the EP and the composite coatings with different doping amounts of DMTD@MSN-PAA were evaluated by EIS measurements. The R ct value of the EP coating decreased from 190.3 to 25.1 Ω · cm2 within the time of 48 h of immersion in 3.5 wt% NaCl solution, while ones of the EP/DMTD@MSN-PAA coatings doped with 1 wt%, 3 wt% and 6 wt% of DMTD@MSN-PAA increased from 303.1, 720.7.7, 523.4–1426.4, 2113.8, 1066.3 Ω · cm2, respectively. In addition, the corrosion resistance of the EP and composite coatings were further evaluated by etching experiments. The results showed that after 35 d of immersion, compared with that of the EP coating, surface corrosion degree of the composite coatings was lower, and the scaling off speed of the coatings slowed down, which further proved that the composite coating had strong corrosion resistance and special self-healing characteristics.

Smart PDDA/PAA Multilayer Coatings with Enhanced Stimuli Responsive Self-Healing and Anti-Corrosion Ability

Construction and Study on Corrosion Protective Property of Polydopamine-Based 3-Layer Organic Coatings on Aluminum Substrate

A double-layered self-healing coating system based on the synergistic strategy of cysteine and iron polyacrylate for corrosion protection

Intelligent Saline Enabled Self-Healing of Multilayer Coatings and Its Optimization to Achieve Redox Catalytically Provoked Anti-Corrosion Ability

Mussel-inspired Self-assembly into Polymer Coatings of Different Molecular Weight Electrolytes for Enhanced Self-healing and Corrosion Properties

Dual pH-Sensitive Smart Coatings for Corrosion Inhibition of AA2024-T3

Intelligent anticorrosion saline-enabled self-healing polyelectrolyte multilayer coatings

A smart anticorrosive coating based on pH-sensitive microspheres fabricated via a facile method for protection of AA2024-T3

Smart coatings embedded with polydopamine-decorated layer-by-layer assembled SnO2 nanocontainers for the corrosion protection of 304 stainless steels

Designing Smart Microcapsules with Natural Polyelectrolytes to Improve Self-Healing Performance for Water-Based Polyurethane Coatings

Design of smart protective coatings with autonomous self-healing and early corrosion reporting properties

Study on Preparation and Performance of Acid pH-Responsive Intelligent Self-Healing Coating

Multilevel Self-Healing Characteristics of Smart Polymeric Composite Coatings

Controllable Group Tailoring Enables Enhanced Ph-Responsive Behaviors of Polydopamine Delivery System in Smart Self-Healing Anticorrosion Coatings

Preparation of self-healing superhydrophobic polyacrylate coatings based on silica matrix-microcapsules containing corrosion inhibitor for long-term corrosion protection

Environmentally benign smart self-healing silicone-based coating with dual antifouling and anti-corrosion properties

Durable self-healing coating system based on pH-responsive core-shell nanostructures

Self-healing epoxy coatings with microencapsulated ionic PDMS oligomers for corrosion protection based on supramolecular acid-base interactions

Smart nanoarchitectonics of epoxy coating: Preparation, release behavior and self-healing performance based on mesoporous silica nano-containers loaded with DMTD inhibitors

Ultralong-Term Durable Anticorrosive Coatings by Integration of Double-Layered Transfer Self-Healing Ability, Fe Ion-Responsive Ability, and Active/Passive Functional Partitioning

Dual Anticorrosive and Self-healing Coating Based on Multiresponsive Polyaniline Porous Microspheres