Laboratory Investigations of the Hydro-Mechanical–Chemical Coupling Behaviour of Sandstone in CO 2 Storage in Aquifers

Hui Zhou,Dawei Hu,Fan Zhang,Jianfu Shao,Xiating Feng
DOI: https://doi.org/10.1007/s00603-015-0752-8
IF: 6.518
2015-01-01
Rock Mechanics and Rock Engineering
Abstract:This paper is devoted to experimental investigations of the hydro-mechanical–chemical coupling behaviour of sandstone in the context of CO 2 storage in aquifers. We focused on the evolution of creep strain, the transport properties and the elastic modulus of sandstone under the effect of CO 2 –brine or CO 2 alone. A summary of previous laboratory results is first presented, including mechanical, poromechanical and hydro-mechanical–chemical coupling properties. Tests were then performed to investigate the evolution of the creep strain and permeability during the injection of CO 2 –brine or CO 2 alone. After the injection of CO 2 –brine or CO 2 alone, an instantaneous volumetric dilatancy was observed due to the decrease in the effective confining stress. However, CO 2 alone had a significant influence on the creep strain and permeability compared to the small influence of CO 2 –brine. This phenomenon can be attributed to the acceleration of the CO 2 –brine–rock reaction by the generation of carbonic acid induced by the dissolution of CO 2 into the brine. The original indentation tests on samples after the CO 2 –brine–rock reaction were also performed and indicated that the elastic modulus decreased with an increasing reaction time. The present laboratory results can advance our knowledge of the hydro-mechanical–chemical coupling behaviour of sandstone in CO 2 storage in aquifers.
What problem does this paper attempt to address?