Abstract:Rock mass is an inhomogeneous medium containing a large quantity of fractures and defects. The coupling interaction between seepage evolution and crack propagation is greatly significant to rock projects. In this study, a novel coupled model involving fluid pressure and mechanical damage is developed in FLAC3D. Both the pre-peak softening and post-peak mechanical degeneration of elements are considered based on their different failure types, i.e. tension failure, shear failure, and their state combinations. Investigations are carried out on the specimen with two pre-fractures and 5% defects derived from modelling cement mortar. Four test schemes of dry and saturated specimens are conducted under uniaxial and biaxial loadings. The specimens' failure process under seepage could be divided into three stages. The failure process is basically different from that under dry conditions. Both compressive and residual strengths have declined significantly, by more than 10 and 15% respectively compared with dry specimens. The volume expansion of the specimen has remarkably increased, by more than 320%. Besides, the results are well consistent with dry experiments on cement mortar, which demonstrates feasibility of the method. Finally, the proposed model is applied to explore seepage evolution, rock mass deformation and lining stability of Jiaozhou Bay subsea tunnel within excavation. A new generation method of fracture networks is developed and the simulated results match well with field monitoring data.Article highlightsThe novel coupled model considers both pre-peak damage and post-peak degeneration of rock.Principles are based on elements' failure type, i.e. tension failure, shear failure, and their combinations.Previous studies are based on elastic–plastic models, which are improved to be elastic-brittle and suit brittle rock mass better.Weakened elements are developed to simulate natural defects in real rocks.A new generation method of stochastic fracture networks is developed for engineering practice.

Modeling the Progressive Failure of Jointed Rock Slope Using Fracture Mechanics and the Strength Reduction Method

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Theoretical Model for the Shear Strength of Rock Discontinuities with Non-Associated Flow Laws

Study of the Failure Mechanism and Progressive Failure Process of Intact Rock Patches of Rock Slope with Weak Surfaces

The Time-Dependent Failure Mechanism of Rocks and Associated Application in Slope Engineering: An Explanation Based on Numerical Investigation

Modeling the entire progressive failure process of rock slopes using a strength-based criterion

Development of a shear strength model for a rock mass containing a complex fracture system based on direct shear tests: a case study

Experimental and numerical investigation on the mechanical properties and progressive failure mechanism of intermittent multi-jointed rock models under uniaxial compression

Dynamic simulation and failure analysis of intermittently jointed rock cells and slopes based on a novel spring-based smoothed particle hydrodynamics method

Research on Hierarchical Model of Rock Joints

Integration of Automatic Discontinuity Identification and Multi-Scale Hierarchical Modeling for Stability Analysis of Highly-Jointed Rock Slopes

Simulating progressive failure in fractured saturated rock under seepage condition using a novel coupled model and the application

Coupled Hydro-Mechanical Analysis for Rainfall-Induced Failure of Fractured Rock Slopes

Study on Mechanical Model for Postpeak Shear Behavior of Rock Joints Based on Degradation Characteristics of the 3D Morphology

Experimental and Numerical Study of the Failure Behavior of Intermittent Rock Joints Subjected to Direct Shear Load

Stability Analysis Of Jointed Slope Based On Smeared Crack Model

Simulation of the Nonlinear Mechanical Behaviors of Jointed Rock Masses Based on the Improved Discontinuous Deformation and Displacement Method

A discrete fracture network based modeling scheme for analyzing the stability of highly fractured rock slope

Experimental and numerical study of step-path failure in jointed rocks

A modified smoothed particle hydrodynamics method considering residual stress for simulating failure and its application in layered rock mass

Influence of joint spacing and rock characteristics on the toppling stability of cut rock slope through a simplified limit equilibrium method