Abstract:The application of two-dimensional array laser source is more and more popular. Currently, many methods have been proposed for the collimation of laser beams; however, there is still a lack of research for the collimation of array laser sources so far. This paper presents a collimating method for array laser source. Through the calcu-lation of the lens surfaces, the shape of the illumination spot on the target can be directly controlled, and the diameter of the lens can be directly constrained by setting the initial point coordinates. In this method, the edge-ray principle is used to simplify the extended light source model. The size and intensity distribution of the light spot irradiated by the light source to the target position were simulated by establishing a ray tracing model. The whole process was calculated using MATLAB software. The corresponding lens model can be obtained by fitting discrete coordinate points using Solid Works. Finally, the optical design software ZEMAX is used for simulation test. After shaping the laser light source with a luminous diameter of 1 mm, a circular and uniform spot is ob-tained at 100 m. For the point light source model, the divergence angle of 0.28 degrees is achieved. Furthermore, an annular spot is also realized by setting the laser irradiation range, which provide a new solution for customized laser lighting.

Theoretical Analysis of Lens Array for Uniform Irradiation on Target in Multimode Fiber Lasers

Uniform irradiation of adjustable target spots in high-power laser driver.

Smoothing of Small On-Target Spots Produced by Frequency-Tripled Beams Using Lens Array and Spectral Dispersion

Beam Characteristic Analysis of Scalar Diffraction from Weakly Guiding Optical Fiber

Illumination Uniformity Of A Spherical Target Directly Driven By Fiber Lasers

Subwavelength Focusing by a Micro/nanofiber Array.

Design of Laser Projection Display Illumination System Based on Freeform Surface Array

Freeform Lens Arrays For Off-Axis Illumination In An Optical Lithography System

Placement Scheme of Numerous Laser Beams in the Context of Fiber-Based Laser Fusion

Tailoring Freeform Beam-Shaping Lenses for Edge-Emitting Lasers

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Research on target uniform irradiation method using linearly modulated light and special grating dispersion

Beam-shaping of Laser Diode Stack for Uniform Illumination by Cylindrical Micro-Lenses

Research on the Design of Kepler Refractive Shaping System with the Long Working Focal Depth

Power Enhancement and Spot Homogenization Design for Arrayed Semiconductor Lasers

Optimization of the arrangement of fiber laser array in beam coherent combining

Incoherent combination of fiber lasers using a collimating and focusing optical system in fiber-based laser fusion

Spatial shape the laser beams to achieve the uniform irradiation required for laser direct-driven fusion

Beam Shaping for Two-Dimensional Laser Array by a Computational Model

Design of kinoform phase plate arrays for spatial beam smoothing

Model analysis of effect of diffraction focus characteristics of microlens arrays on parallel laser direct writing quality