Direct STM Observation of the Organometallic Intermediates in Ullmann Coupling Reactions on Metal Surfaces

K. Wu

DOI: https://doi.org/10.1017/s1431927612006216

IF: 4.0991

2012-01-01

Microscopy and Microanalysis

Abstract:Extended abstract of a paper presented at Microscopy and Microanalysis 2012 in Phoenix, Arizona, USA, July 29 – August 2, 2012.

What problem does this paper attempt to address?

In Situ Time-Resolved Attenuated Total Reflectance Infrared Spectroscopy for Probing Metal-Organic Framework Thin Film Growth.

Junjie Zhao,Berc Kalanyan,Heather F. Barton,Brent A. Sperling,Gregory N. Parsons

DOI: https://doi.org/10.1021/acs.chemmater.7b03096

IF: 10.508

2017-01-01

Chemistry of Materials

Abstract:In situ chemical measurements of solution/surface reactions during metal-organic framework (MOF) thin film growth can provide valuable information about the mechanistic and kinetic aspects of key reaction steps, and allow control over crystal quality and material properties. Here, we report a new approach to study the growth of MOF thin films in a flow cell using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). Real-time spectra recorded during continuous flow synthesis were used to investigate the mechanism and kinetics that govern the formation of (Zn, Cu) hydroxy double salts (HDSs) from ZnO thin films and the subsequent conversion of HDS to HKUST-1. We found that both reactions follow pseudo-first order kinetics. Real-time measurements also revealed that the limited mass transport of reactants may lead to partial conversion of ZnO to HDS and therefore leaves an interfacial ZnO layer beneath the HDS film providing strong adhesion of the HKUST-1 coating to the substrate. This in situ flow-cell ATR-FTIR method is generalizable for studying the dynamic processes of MOF thin film growth, and could be used for other solid/liquid reaction systems involving thin films.
Single-molecule Resolution of an Organometallic Intermediate in a Surface-Supported Ullmann Coupling Reaction.

Weihua Wang,Xingqiang Shi,Shiyong Wang,Michel A. Van Hove,Nian Lin

DOI: https://doi.org/10.1021/ja204956b

IF: 15

2011-01-01

Journal of the American Chemical Society

Abstract:We have studied the organometallic intermediate of a surface-supported Ullmann coupling reaction from 4, 4″-dibromo-p-terphenyl to poly(para-phenylene) by scanning tunneling microscopy/spectroscopy and density functional theory calculations. Our study reveals at a single-molecular level that the intermediate consists of biradical terphenyl (ph)(3) units that are connected by single Cu atoms through C-Cu-C bridges. Upon further increasing the temperature, the neighboring biradical (ph)(3) units are coupled by C-C bonds forming poly(para-phenylene) oligomers while the Cu atoms are released.
Direct Observation of Copper-Induced Role on Ullmann Reaction by Scanning Tunneling Microscopy

Xinli Leng,Wei Li,Xiaoqing Liu,Li Wang

DOI: https://doi.org/10.1016/j.chemphys.2019.02.016

IF: 2.552

2019-01-01

Chemical Physics

Abstract:Ullmann coupling of 4,4′'-dibromo-p-terphenyl (DBTP) on Ag(110) surface has been investigated by introducing guest copper atoms in two ways. Scanning tunneling microscopy observations unambiguously demonstrate that the Ullmann reaction on Ag(110) surface can be improved by introducing copper atoms in both ways, and the effect is more remarkable when copper atoms are introduced on a annealing surface covered by molecules.
Direct Observation of Single Atoms in Sinter-Resistant and Bimetallic Catalyst Systems Synthesized by Atomic Layer Deposition

K.-B. Low,Y. Lei,J. Lu,J.W. Elam

DOI: https://doi.org/10.1017/s1431927613010520

IF: 4.0991

2013-01-01

Microscopy and Microanalysis

Abstract:Extended abstract of a paper presented at Microscopy and Microanalysis 2013 in Indianapolis, Indiana, USA, August 4 – August 8, 2013.
Steering Surface Reaction Dynamics with a Self‐Assembly Strategy: Ullmann Coupling on Metal Surfaces

Xiong Zhou,Chenguang Wang,Yajie Zhang,Fang Cheng,Yang He,Qian Shen,Jian Shang,Xiang Shao,Wei Ji,Wei Chen,Guoqin Xu,Kai Wu

DOI: https://doi.org/10.1002/anie.201705018

2017-01-01

Angewandte Chemie

Abstract:Ullmann coupling of 4-bromobiphenyl thermally catalyzed on Ag(111), Cu(111), and Cu(100) surfaces was scrutinized by scanning tunneling microscopy as well as theoretical calculations. Detailed experimental evidence showed that initial formation of organometallic intermediates on the surface, as self-assembled structures or sparsely dispersed species, is determined by the subsequent reaction pathway. Specifically, the assembled organometallic intermediates at full coverage underwent a single-barrier process to directly convert into the final coupling products, while the sparsely dispersed intermediates at low coverage went through a double-barrier process via newly identified clover-shaped intermediates prior to formation of the final coupling products. These findings demonstrate that a self-assembly strategy can efficiently steer surface reaction pathways and dynamics.
Molecular Insight into On-Surface Chemistry of an Organometallic Polymer.

Yuxuan Lin,Mengxiao Diao,Jingxin Dai,Zhen Xu,Xinwei Zhao,Xiaojie Wen,Lingbo Xing,Xiong Zhou,Qiwei Chen,Jing Liu,Kai Wu

DOI: https://doi.org/10.1039/d2cp04858b

IF: 3.3

2022-01-01

Physical Chemistry Chemical Physics

Abstract:A molecular investigation of Cu-elimination and subsequent C-C coupling of DCTP (4,4''-dichloro-1,1':3',1''-terphenyl)-Cu organometallic (OM) polymers on Cu(111) is conducted by scanning tunneling microscopy and spectroscopy, revealing that the Cu adatoms embedded in the DCTP-Cu chains are located at the hollow and bridge sites on the Cu(111) surface. The difference in the catalytic activities of these surface sites leads to stepwise elimination of Cu adatoms in the OM chains. Moreover, the interchain interaction plays an important role in the Cu-elimination process of the DCTP-Cu chains as well. The interchain steric hindrance, on the one hand, induces the formation of Cu-eliminated intermediates that are scarcely observed in other Ullmann coupling systems, and on the other hand, promotes the cooperative Cu-elimination and C-C coupling of the OM segments in neighboring chains. These findings demonstrate the key role of the molecule-substrate and intermolecular interactions in mediating the reaction processes of the extended molecular systems on the surface.
Dechlorinated Ullmann Coupling Reaction of Aryl Chlorides on Ag(111): A Combined STM and XPS Study.

Jingxin Dai,Wenhui Zhao,Lingbo Xing,Jian Shang,Huanxin Ju,Xiong Zhou,Jing Liu,Qiwei Chen,Yongfeng Wang,Junfa Zhu,Kai Wu

DOI: https://doi.org/10.1002/cphc.201900264

IF: 3.52

2019-01-01

ChemPhysChem

Abstract:Surface-assisted Ullmann coupling was widely applied to construct various molecular nanostructures on surfaces due to its reliability and controllability. By using 4,4''-dichloro-1,1':3',1''-terphenyl (DCTP) as the precursor, covalently bonded zig-zag oligophenylene chains and hexagonal hyperbenzene rings, e. g., [18]-honeycombenes, were successfully fabricated on Ag(111) via dechlorinated Ullmann coupling reaction. Stepwise annealing was applied to investigate the reaction process in detail. Scanning tunneling microscopy and synchrotron X-ray photoemission spectroscopy were utilized to explore the thermal evolution of the DCTP molecules on Ag(111) under ultrahigh vacuum conditions, evidencing the existence of intact DCTP molecules, chemisorbed Cl atoms, covalently bonded DCTP dimers as well as organometallic C-Ag-C-containing intermediates. These results may help understand dechlorinated Ullmann coupling reaction of aryl chlorides on metal surfaces.
Combined Photoemission And Scanning Tunneling Microscopy Study Of The Surface-Assisted Ullmann Coupling Reaction

min chen,jie xiao,hanspeter steinrueck,shiyong wang,weihua wang,nian lin,wolfgang hieringer,j michael gottfried

DOI: https://doi.org/10.1021/jp4121468

2014-01-01

Abstract:The adsorption and reaction of 4,4"-dibromopara-terphenyl (DBTP) and 1,3,5-tris(4-bromophenyl-)benzene (TBB) on Cu(111) surface were studied with X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and density functional theory (DFT) calculations. In addition, complementary scanning tunneling microscopy (STM) data are presented. At submonolayer coverage, scission of C-Br bonds occurs between 170 and 240 K. The estimated activation energy for this process is considerably lower than the C-Br bond energy, indicating that bond scission is assisted by Cu atoms of the substrate. The remaining molecular backbones undergo linkage by C-Cu-C bonds to form organometallic oligomers. Annealing of these oligomers leads to the formation of C-C bonded covalent two-dimensional networks. Above monolayer coverage, complete C-Br cleavage requires higher temperature, confirming the role of the Cu surface in the reaction. The results provide insight into the C-Br bond scission as the initial step of the surface-assisted Ullmann reaction.
In Situ Monitoring of Transmetallation in Electric Potential-Promoted Oxidative Coupling in a Single-Molecule Junction

Yunpeng Li,Chengxi Zhao,Rui Wang,Ajun Tang,Wenjing Hong,Dahui Qu,He Tian,Hongxiang Li

DOI: https://doi.org/10.31635/ccschem.022.202101757

2022-01-01

CCS Chemistry

Abstract:To monitor and investigate chemical reactions in real time and in situ is a long-standing, challenging goal in chemistry. Herein, an electric potential-promoted oxidative coupling reaction of organoboron compounds without the addition of base is reported, and the transmetallation process involved is monitored in real time and in situ with the scanning tunneling microscopy break single-molecule junctions (STMBJ) technique. We found that the electric potential applied determined the transmetallation. At low-bias voltage, the first-step transmetallation process occurred and afforded Au -C-bonded aryl gold intermediates. The electronic properties of organoboron compounds have a strong influence on the transmetallation process, and electron-rich compounds facilitate this transformation. At high-bias voltage, the second-step transmetallation process took place, and the corresponding intermediate (highly reactive diaryl metal complex) was detected with the assistance of Pd(OAc)(2). Our work demonstrates the applications of STMBJ on in situ monitoring and catalyzing of chemical reactions and provides a new methodology to fabricate singlemolecule devices. [GRAPHICS] .
Unraveling the Origin of Elemental Chemical Shift and the Role of Atomic Hydrogen in a Surface Ullmann Coupling System

Dong Han,Honghe Ding,Juanjuan Xiong,Tianchen Qin,Xingwang Cheng,Jun Hu,Qian Xu,Junfa Zhu

DOI: https://doi.org/10.1021/acsnano.4c09375

IF: 17.1

2024-10-22

ACS Nano

Abstract:The Ullmann coupling of aryl halides is a powerful method in the on-surface synthesis of functional materials. Understanding its basic aspects and influencing factors can aid in the use of this tool for the fabrication of intriguing structures. In this study, we unveil (1) the origin of the shift in the elemental binding energy (BE) and (2) the functions of atomic hydrogen (AH) in a typical Ullmann coupling system using combined spectroscopy and microscopy techniques. During debromination of the aryl halide precursor, the work function (WF) alteration is correlated with the surface Br amount. The WF change instead of C-Ag formation is proposed to play a dominant role in the shift of the molecular C 1s BE. AH dosing onto organometallic chains leads to chain decomposition and surface Br removal. In contrast, AH dosing onto covalent poly(para-phenylene) (PPP) chains results in superhydrogenation in addition to Br removal. The C 1s BE shift is attributed to both WF change and superhydrogenation effects. Thermal annealing restores the PPP chains by eliminating superhydrogenation, which causes the C 1s BE to shift to a high BE. This study provides deep insights into the mechanisms of Ullmann coupling on surfaces, highlighting the significant role of WF alterations and AH treatments in these processes.
Ullmann-Like Covalent Bond Coupling without Participation of Metal Atoms

Teng Zhang,Renyi Li,Xiaoyu Hao,Quanzhen Zhang,Huixia Yang,Yanhui Hou,Baofei Hou,Liangguang Jia,Kaiyue Jiang,Yu Zhang,Xu Wu,Xiaodong Zhuang,Liwei Liu,Yugui Yao,Wei Guo,Yeliang Wang

DOI: https://doi.org/10.1021/acsnano.2c09467

IF: 17.1

2023-02-23

ACS Nano

Abstract:Ullmann-like on-surface synthesis is one of the most appropriate approaches for the bottom-up fabrication of covalent organic nanostructures and many successes have been achieved. The Ullmann reaction requires the oxidative addition of a catalyst (a metal atom in most cases): the metal atom will insert into a carbon-halogen bond, forming organometallic intermediates, which are then reductively eliminated and form C-C covalent bonds. As a result, traditional Ullmann coupling involves reactions of...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Predicting Organometallic Intermediates in the Surface-Assisted Ullmann Coupling of Chrysene Isomers

Jakub Lisiecki,Paweł Szabelski

DOI: https://doi.org/10.3390/molecules29071553

IF: 4.6

2024-03-30

Molecules

Abstract:On-surface polymerization of functional organic molecules has been recently recognized as a promising route to persistent low-dimensional structures with tailorable properties. In this contribution, using the coarse-grained Monte Carlo simulation method, we study the initial stage of the Ullmann coupling of doubly halogenated chrysene isomers adsorbed on a catalytically active (111) crystalline surface. To that end, we focus on the formation of labile metal-organic precursor structures preceding the covalent bonding of chrysene monomers. Four monomeric chrysene units with differently distributed halogen substituents were probed in the simulations, and the resulting precursor structures were compared and quantified. Moreover, the effect of (pro)chirality of chrysene tectons on the structure formation was elucidated by running separate simulations in enantiopure and racemic systems. The calculations showed that suitable manipulation of the halogen substitution pattern allows for the creation of diverse precursor architectures, ranging from straight and winded chains to cyclic oligomers with enantiopure, racemic, and nonracemic composition. The obtained findings can be helpful in developing synthetic strategies for covalent polymers with predefined architecture and functionality.

chemistry, multidisciplinary,biochemistry & molecular biology
On-surface Synthesis Approach to Preparing One-Dimensional Organometallic and Poly-P-phenylene Chains

Xiong Zhou,Fabian Bebensee,Qian Shen,Regine Bebensee,Fang Cheng,Yang He,Hui Su,Wei Chen,Guo Qin Xu,Flemming Besenbacher,Trolle R. Linderoth,Kai Wu

DOI: https://doi.org/10.1039/c6qm00142d

IF: 8.6834

2017-01-01

Materials Chemistry Frontiers

Abstract:Substrates and extrinsic metals on top dictate the reaction intermediates and pathways of on-surface Ullmann couplings.
Identifying the Convergent Reaction Path from Predesigned Assembled Structures: Dissymmetrical Dehalogenation of Br2Py on Ag(111)

University of Chinese Academy of Sciences,Liang Zhaofeng,Soochow University,Xie Lei,Huang Han,Tang Jianxin,Yu Miao

DOI: https://doi.org/10.1007/s12274-021-3409-9

IF: 9.9

2021-01-01

Nano Research

Abstract:On-surface Ullmann coupling has been intensely utilized for the tailor-made fabrication of conjugated frameworks towards molecular electronics,however,reaction mechanisms are still limitedly understood.Herein,we provide a comprehensive elucidation of the surface Ullmann coupling of 2,7-dibromopyrene (Br2Py) on Ag(111) by scanning tunnelling microscopy (STM),X-ray photoelectron spectroscopy (XPS) and density function theory (DFT),and reveal that the Ullmann reaction path is unique regardless of predesigned assembled structures.By manipulating deposition conditions,diverse assembled architectures have been constructed for Br2Py on Ag(111),including the ladder phase,parallel arrangement,hexagonal patterns from monomers or Kagome lattices based on organometallic (OM) dimers.Intriguingly,stepwise annealing leads to an identical reaction diagram for the surface Ullmann coupling from individual assembled structures convergent into the brick-wall-pattern OM dimers first,which is deemed to be a stable phase,and then into elongated OM chains in order and eventually long-range polymers with direct C--C coupling.While the reaction mechanism is demonstrated to be dominated by the metal coordinated and halogen bonding motifs,interestingly,it has also been revealed that surface adatoms and dissociated Br atoms play a crucial role in coupling reactions.In contrast to previous reports demonstrating the manipulation of Ullmann reactions by preassembled strategy,herein,weak intermolecular interaction in assembled nanostructures is immediately suppressed by strong covalent bonding during reactions.Importantly,our report proposes essential insights on fundamental understanding of surface Ullmann coupling towards high-yield surface synthesis.
STM Probing the Supramolecular Coordination Chemistry on Solid Surface: Structure, Dynamic, and Reactivity

Yan-fang Geng,Ping Li,Ji-zhen Li,Xue-mei Zhang,Qing-dao Zeng,Chen Wang

DOI: https://doi.org/10.1016/j.ccr.2017.01.014

IF: 24.833

2017-01-01

Coordination Chemistry Reviews

Abstract:Supramolecular coordination chemistry is currently a very popular topic in metallorganic chemistry and has a very large impact on a broad field of applications. More importantly, the invention of STM has opened new doorways to study these concepts on surfaces. This review summarizes the recent progress on surface-confined metallosupramolecular engineering based on the supramolecular coordination chemistry, with the aid of STM. At the beginning, a discussion of metalloids, alkali metals, and alkaline earth metal-based metallosupramolecular engineering is conducted. Next, transition metal-based coordination chemistry on surfaces is discussed. Then, polygonal, double- and triple-decker structures based on rare-earth-metal coordination chemistry are presented. Based on these supramolecular structures, the dynamics of coordination as well as the formed supramolecules are discussed. In the end, the coordination chemistry, including stability of coordination bonds, organic molecules, and gas molecule adsorption is described. Throughout this review, the coordination structures, dynamics and reactivity have been emphasized, which are important current and future research themes. (C) 2017 Elsevier B.V. All rights reserved.
Surface Adatom Mediated Structural Transformation in Bromoarene Monolayers: Precursor Phases in Surface Ullmann Reaction.

Qitang Fan,Liming Liu,Jingya Dai,Tao Wang,Huanxin Ju,Jin Zhao,Julian Kuttner,Gerhard Hilt,J. Michael Gottfried,Junfa Zhu

DOI: https://doi.org/10.1021/acsnano.7b06787

IF: 17.1

2018-01-01

ACS Nano

Abstract:Structural transformations of supramolecular systems triggered by external stimuli maintain great potential for application in the fabrication of molecular storage devices. Using combined ultrahigh vacuum scanning tunneling microscopy, X-ray photoemission spectroscopy, and density functional theory calculations, we observed the surface adatom mediated structural transformation from 4,4''-dibromo- m-terphenyl (DMTP)-based halogen-bonded networks to DMTP-Cu(Ag) coordination networks on Cu(111) and Ag(111) at low temperatures. The halogen-bonded networks, which were formed on Cu(111) at 97 K and on Ag(111) at 93 K, consist of intact DMTP molecules stabilized by triple Br···Br bonds. The DMTP-Cu(Ag) coordination networks form on Cu(111) at 113 K and on Ag(111) at 103 K. They contain alternatingly arranged intact DMTP molecules and Cu(Ag) adatoms stabilized by weak C-Br···Cu(Ag) coordination bonds. Annealing the DMTP-Ag structure to 333 K leads to the initiation of C-Br bond scission. This observation suggests that the DMTP-Ag coordination network represents the intermediate phase ready for dehalogenation, which is the first step of the surface Ullmann reaction.
Real-Time Imaging of On-Surface Ullmann Polymerization Reveals an Inhibiting Effect of Adatoms

Dominik Dettmann,Mirco Panighel,Navathej Preetha Genesh,Gianluca Galeotti,Oliver MacLean,Matteo Farnesi Camellone,Tarnjit Kaur Johal,Stefano Fabris,Cristina Africh,Dmytro F. Perepichka,Federico Rosei,Giorgio Contini

DOI: https://doi.org/10.1021/jacs.4c06994

IF: 15

2024-08-23

Journal of the American Chemical Society

Abstract:Ullmann coupling is a widely used reaction for the on-surface growth of low-dimensional carbon nanomaterials. The irreversible nature of this reaction prevents the "self-healing" of defects, and a detailed knowledge of its mechanism is therefore essential to enable the growth of extended ordered structures. However, the dynamics of the Ullmann polymerization remain largely unexplored, as coupling events occur on a timescale faster than conventional scanning probe microscopy imaging frequencies....

chemistry, multidisciplinary
Hierarchy in the halogen activation during surface-promoted Ullmann coupling

Néstor Merino-Díez,Alejandro Pérez Paz,Jingcheng Li,Manuel Vilas-Varela,James Lawrence,Mohammed S. G. Mohammed,Alejandro Berdonces-Layunta,Ana Barragán,J. Ignacio Pascual,Jorge Lobo-Checa,Diego Peña,Dimas G. de Oteyza

DOI: https://doi.org/10.1002/cphc.201900633

2020-12-01

Abstract:Within the collection of surface-supported reactions currently accessible for the production of extended molecular nanostructures under ultra-high vacuum, Ullmann coupling has been the most successful in the controlled formation of covalent single C-C bonds. Particularly advanced control of this synthetic tool has been obtained by means of hierarchical reactivity, commonly achieved by the use of different halogen atoms that consequently display distinct activation temperatures. Here we report on the site-selective reactivity of certain carbon-halogen bonds. We use precursor molecules halogenated with bromine atoms at two non-equivalent carbon atoms and found that the Ullmann coupling occurs on Au(111) with a remarkable predilection for one of the positions. Experimental evidence is provided by means of scanning tunneling microscopy and a rationalized understanding of the observed preference is obtained from density functional theory calculations.

Materials Science
Metal–organic interaction probed by First Principles STM simulations

Marie-Laure Bocquet,Bin Wang

DOI: https://doi.org/10.1016/j.progsurf.2010.09.001

IF: 7.111

2010-01-01

Progress in Surface Science

Abstract:The Review is devoted to recent progress made from the combination of Scanning Tunneling Microscope (STM) experiments and First Principles atomistic simulations in the chemical characterization of metal–organic interfaces. Density Functional Theory (DFT) has now reached the point to mimic in a quantitative way two pillars of the STM probe: the imaging mode convoluting the topographic and electronic properties and the spectroscopy modes comprising of elastic and inelastic detection ways. We present a selection of hybrid interfaces ranging from isolated benzene derivatives to thin honeycomb carbon film – a single graphene layer – deposited onto transition metal surfaces. The direct experimental analysis of these interfaces was error-prone, necessitating the confrontation with First Principles atomistic simulations. The few examples thus illustrate the power of different kinds of STM simulations to complement the STM data, in order to unambiguously identify the chemical structure of organic adsorbates.
Recent advances in organic reactions on metal surfaces

Hongying Gao

DOI: https://doi.org/10.1039/d3cp06148e

IF: 3.3

2024-05-31

Physical Chemistry Chemical Physics

Abstract:Chemical reactions of organic molecules on the metal surface have been intensively investigated in the past decades, where the metal plays the role of catalyst in many cases. In this review, at first we summarize recent works on spatial molecules, small H2O, O2, CO, CO2 molecules, and the molecules carrying silicon groups as the new trends of molecular candidates in on-surface chemistry. Then, we introduce the spectroscopy and DFT study advances in on-surface reactions. Especially, the in-situ spectroscopy technologies such as electronic spectroscopy, force spectroscopy, X-ray photoemission spectroscopy, STM-induced luminescence, tip-enhanced Raman spectroscopy, temperature-programmed desorption spectroscopy, and infrared reflection adsorption spectroscopy, are important to confirm the occurrence of organic reactions and analyze the products. To understand the underlying mechanism, the DFT study provides detailed information about reaction pathways, conformational evolution, and organometallic intermediates. Usually, STM/nc-AFM topological images, in-situ spectroscopy data, and DFT studies are combined to describe a full story of on-surface organic reaction.

chemistry, physical,physics, atomic, molecular & chemical

Direct STM Observation of the Organometallic Intermediates in Ullmann Coupling Reactions on Metal Surfaces

In Situ Time-Resolved Attenuated Total Reflectance Infrared Spectroscopy for Probing Metal-Organic Framework Thin Film Growth.

Single-molecule Resolution of an Organometallic Intermediate in a Surface-Supported Ullmann Coupling Reaction.

Direct Observation of Copper-Induced Role on Ullmann Reaction by Scanning Tunneling Microscopy

Direct Observation of Single Atoms in Sinter-Resistant and Bimetallic Catalyst Systems Synthesized by Atomic Layer Deposition

Steering Surface Reaction Dynamics with a Self‐Assembly Strategy: Ullmann Coupling on Metal Surfaces

Molecular Insight into On-Surface Chemistry of an Organometallic Polymer.

Dechlorinated Ullmann Coupling Reaction of Aryl Chlorides on Ag(111): A Combined STM and XPS Study.

Combined Photoemission And Scanning Tunneling Microscopy Study Of The Surface-Assisted Ullmann Coupling Reaction

In Situ Monitoring of Transmetallation in Electric Potential-Promoted Oxidative Coupling in a Single-Molecule Junction

Unraveling the Origin of Elemental Chemical Shift and the Role of Atomic Hydrogen in a Surface Ullmann Coupling System

Ullmann-Like Covalent Bond Coupling without Participation of Metal Atoms

Predicting Organometallic Intermediates in the Surface-Assisted Ullmann Coupling of Chrysene Isomers

On-surface Synthesis Approach to Preparing One-Dimensional Organometallic and Poly-P-phenylene Chains

Identifying the Convergent Reaction Path from Predesigned Assembled Structures: Dissymmetrical Dehalogenation of Br2Py on Ag(111)

STM Probing the Supramolecular Coordination Chemistry on Solid Surface: Structure, Dynamic, and Reactivity

Surface Adatom Mediated Structural Transformation in Bromoarene Monolayers: Precursor Phases in Surface Ullmann Reaction.

Real-Time Imaging of On-Surface Ullmann Polymerization Reveals an Inhibiting Effect of Adatoms

Hierarchy in the halogen activation during surface-promoted Ullmann coupling

Metal–organic interaction probed by First Principles STM simulations

Recent advances in organic reactions on metal surfaces