Abstract:The electric admittance of a compound system composed of a thicknessshear mode（TSM） quartz crystal resonator（QCR） and an array of surface viscoelastic micro-beams（MBs） is studied.The governing equations of the MBs are derived from the Timoshenko-beam theory in consideration of shear deformation.The electrical admittance is described directly in terms of the physical properties of the surface epoxy resin（SU-8） MBs from an electrically forced vibration analysis.It is found that both the inertia effect and the constraint effect of the MBs produce competitive influence on the resonant frequency and admittance of the compound QCR system.By further comparing the numerical results calculated from the Timoshenko-beam model with those from the Euler-beam model,the shear deformation is found to lead to some deviation of an admittance spectrum.The deviations are revealed to be evident around the admittance peak（s） and reach the maximum when a natural frequency of the MBs is identical to the fundamental frequency of the QCR.Besides,a higher order vibration mode of the MBs corresponds to a larger deviation at the resonance.

On the Interaction Between a Quartz Crystal Resonator and an Array of Micro-Beams in Thickness-Shear Vibrations

On Modeling of a Thickness‐shear Vibrating Quartz Crystal Plate Attached with Micro‐beams Immersed in Liquid with Considering Couple Stress Effects

Influence of Surface Micro-Beams with Large Deflection on the Resonance Frequency of a Quartz Crystal Resonator in Thickness-Shear Mode Vibrations

Coupled Vibrations and Frequency Shift of Compound System Consisting of Quartz Crystal Resonator in Thickness-Shear Motions and Micro-Beam Array Immersed in Liquid

Coupled Analysis on the Thickness-Shear Vibrations of A Quartz Plate Resonator Covered with Micro-Beams Immersed in Inviscid Liquid and Computation of the Induced Frequency-Shift by the Surface Loadings

Effect of Strain-Gradients of Surface Micro-Beams on Frequency-Shift of a Quartz Crystal Resonator under Thickness-Shear Vibrations

On Thickness-Shear Vibration and Frequency Shift of a Quartz Crystal Resonator Carrying an Array of Micro-Beams Adhered with Tip Nano-Particles

Analysis on the Interaction of Two Micro-Beams Immersed in Liquid Upper a Quartz Crystal Plate and the Induced Frequency Shift

Electric Admittance Analysis of Quartz Crystal Resonator in Thickness-Shear Mode Induced by Array of Surface Viscoelastic Micro-Beams

Effect of an Array of Hemispherical Substance-Units Immersed in Liquid on the Thickness-Shear Vibrations of a Quartz Crystal Plate

The Nonlinear Thickness-Shear Vibrations Of Quartz Crystal Plates

Surface Effects of Surface Nanowires on the Dynamic Behavior of A Quartz Crystal Resonator under the Thickness-Shear Mode Vibrations

Frequency Shift of a Crystal Quartz Resonator in Thickness-Shear Modes Induced by an Array of Hemispherical Material Units

Thickness-shear Vibration of an Elastic Plate Carrying an Array of Rigid Microbeams with Consideration of Couple Stresses

Convergence of Dissipation and Impedance Analysis of Quartz Crystal Microbalance Studies

Thickness-shear Vibration of AT-cut Quartz Plates Carrying Finite-Size Particles with Rotational Degree of Freedom and Rotatory Inertia [Correspondence]

A two-dimensional model on the coupling thickness-shear vibrations of a quartz crystal resonator loaded by an array spherical-cap viscoelastic material units.

An Analysis of Nonlinear Thickness-Shear Vibrations of Quartz Crystal Plates Using the Two-Dimensional Finite Element Method

Quartz crystal microbalance based on torsional piezoelectric resonators.

The non-linear thickness-shear vibrations of quartz crystal plates under an electric field

Vibration sensitivity of a Y-cut quartz thickness-shear resonator