Abstract:This paper presents a Monte Carlo simulation scheme to study the phonon transport and the thermal conductivity of nanocomposites. Special attention has been paid to the implementation of periodic boundary condition in Monte Carlo simulation. The scheme is applied to study the thermal conductivity of silicon germanium (Si-Ge) nanocomposites, which are of great interest for high-efficiency thermoelectric material development. The Monte Carlo simulation was first validated by successfully reproducing the results of (two-dimensional) nanowire composites using the deterministic solution of the phonon Boltzmann transport equation reported earlier and the experimental thermal conductivity of bulk germanium, and then the validated simulation method was used to study (three-dimensional) nanoparticle composites, where Si nanoparticles are embedded in Ge host. The size effects of phonon transport in nanoparticle composites were studied, and the results show that the thermal conductivity of nanoparticle composites can be lower than that of the minimum alloy value, which is of great interest to thermoelectric energy conversion. It was also found that randomly distributed nanopaticles in nanocomposites rendered the thermal conductivity values close to that of periodic aligned patterns. We show that interfacial area per unit volume is a useful parameter to correlate the size effect of thermal conductivity in nanocomposites. The key for the thermal conductivity reduction is to have a high interface density where nanoparticle composites can have a much higher interface density than the simple ID stacks, such as superlattices. Thus, nanocomposites further benefit the enhancement of thermoelectric performance in terms of thermal conductivity reduction. The thermal conductivity values calculated by this work qualitatively agrees with a recent experimental measurement of Si-Ge nanocomposites.

Effective Thermal Conductivity of Metal–Dielectric Composites at the Non-dilute Limit

A Model for the Effective Thermal Conductivity of Metal-Nonmetal Particulate Composites

A Crowding Factor Model for the Thermal Conductivity of Particulate Composites at Non-Dilute Limit

Effective Thermal Conductivity of Particulate Composites with Interfacial Thermal Resistance

On the Thermal Conductivity of Particulate Nanocomposites

Thermal conductivity of graded spherical composites with contact resistance

Effect of a Metallic Coating on the Thermal Conductivity of Carbon Nanofiber–dielectric Matrix Composites

The critical particle size for enhancing thermal conductivity in metal nanoparticle-polymer composites

A general effective thermal conductivity model for composites reinforced by non-contact spherical particles

A Reconstruction of Maxwell Model for Effective Thermal Conductivity of Composite Materials

High Frequency Electromagnetic Properties of Metal Particle-Dielectric Composites

Experimental and Theoretical Studies of Effective Thermal Conductivity of Composites Made of Silicone Rubber and Al2o3 Particles

Effective dielectric response of graded spherical composites

Non-steady effective thermal conductivity of matrix composite materials with high volume concentration of particles

Modeling the Thermal Conductivity and Phonon Transport in Nanoparticle Composites Using Monte Carlo Simulation

A Statistical Model for Effective Thermal Conductivity of Composite Materials

A Numerical Investigation on the Heat Conduction in High Filler Loading Particulate Composites

Effective Thermal Conductivity of Composites Filled with Different Shape Particles

Effective Thermal Conductivity of Ellipsoidal Inclusion-Reinforced Composites: Theoretical Model and Numerical Simulation

Effective thermal conductivity of composite material with metallic matrix - I. Numerical analysis

Thermal Conductivity in Highly Loaded Metallic Nanowire-Dielectric Composite: Effect of Percolation Network