Abstract:Background: To realize atraumatic vessel occlusion, a new hemostatic clamp using superelastic shape memory alloy (SMA) as a pressure control limiter has been proposed. It was designed taking advantage of a unique mechanical property of SMA. The ability to control pressure with the newly designed SMA clamp was investigated. The traumatic effect on vessel walls was evaluated in order to confirm the SMA clamp's biological effect of protecting vessels from damage. Methods: Twenty-four pig thoracic aortas were divided into four groups: SMA group 1 (0.3 mm diameter SMA wire used), SMA group 2 (0.4 mm diameter SMA wire used), base model group ( hemostatic clamp of Mimura type), and a control group. The biomechanical interaction between the pressure-controlled clamp and animal aortas was evaluated with a micropressure analyzing system. The atraumatic effect of the SMA clamp was examined on pig thoracic aortas in vitro and compared with that of its base model. The morphological injury of each vessel was evaluated after being clamped for 15 min. Results: Pressure saturation was shown in the displacement-pressure curve of the SMA clamp. In both SMA group 1 and SMA group 2, except for a slight imprint of compression in the intima, no obvious injury was observed, while in the base model group the endothelial laceration was observed when the clamp was closed to notch I. More serious injuries in the endothelial intima and media were observed when the clamp was closed to notches II and III. Conclusion: The effect of pressure-controlling SMA clamps on the in vitro vessel model was evaluated. Histological observation and the traumatic score proved that the safety of the clamps was improved with the new design of pressure control. This technique supplies an effective and applicable way of realizing atraumatic clamping.

Design of Safe Surgical Forceps Using Superelastic Smas

Less invasive hemostatic forceps using superelastic SMAs

The Application of Superelastic SMAs in Less Invasive Haemostatic Forceps

A Novel Structure of A Less Invasive Forceps to Realize Linear Clamping for Endoscopic Surgery

Design and Analysis of a Hand-Held Surgical Forceps with a Force-Holding Function

Design of a Constant-Force Component Using Superelastic SMA

Design of an Sma Embedded Clamp for Endoscopic Surgery

Bionic Design of a Disposable Compliant Surgical Forceps With Optimized Clamping Performance

DESIGN OPTIMIZATION OF C-SHAPED SUPERELASTIC SMA SHEET WITH CONSTANT FORCE

Study of insertion force and deformation for suturing with precurved NiTi guidewire.

The Study of the Characteristics of Constant-Force Elements Using NiTi SMAs

Parameter Optimization for the Design of Constant-Force Elements Using SMAs

Assessment of constant force properties for various superelastic shape memory alloy structure

Finite Element Simulation and Optimization of Radial Resistive Force for Shape Memory Alloy Vertebral Body Stent

Design and Development of Magnesium-Based Suture Anchor for Rotator Cuff Repair Using Finite Element Analysis and In Vitro Testing

Design of Internal Grasper Based on Magnetic Anchoring Technique in Trocar-Less Laparoscopic Surgery

Making metals linear super-elastic with ultralow modulus and nearly zero hysteresis

Haptics-Enabled Forceps with Multi-Modal Force Sensing: Towards Task-Autonomous Surgery

Design, simulation and experimental analysis of a monolithic bending section for enhanced maneuverability of single use laparoscopic devices

Application of shape memory alloy pressure-controlled vascular clamp for atraumatic vessel occlusion.

An Integrated 3D MEMS Force Sensing and Feedback System for Robot-Assisted Minimally Invasive Surgery