Abstract:A combined surface treatment of laser surface texturing (LST)-thermal oxidation (TO) technique was performed on pure titanium (TA2) matrix to enhance its wear resistance. The dimple-shaped texture was fabricated by using an optical fiber laser processing equipment, and the dimple-shaped texture with diameter of 300 μm and density of 5%. The thermal oxidation coating (TO-coating) was prepared by TO treatment under 650 °C for 30 h. Microstructure, microhardness, and bonding strength of the TO-TA2 were systematically characterized. Comparative evaluation of anti-wear performance for relevant samples of duplex treatment TA2 (DT-TA2), LST-TA2, TO-TA2, and TA2 matrix were investigated via the dry sliding process. The results revealed that uniform and dense TO coating with a thickness of approximately 11 μm was fabricated on the surface of the TA2 matrix. The attained TO coating consisted of the compound phase of TiO2 shown by XRD detection. The surface hardness and elasticity modulus of the TA2 were improved by TO treatment, and the attained TO coating had a strong bonding strength with the TA2 matrix. In terms of wear rate, the samples were sorted in the following order: DT-TA2 < TO-TA2 < LST-TA2 < TA2. For tribological behavior, the duplex treatment process can significantly reduce the abrasive wear and adhesive wear tendency of the TA2 matrix. Taking advantage of LST and TO treatment, the wear resistance of TA2 sample after duplex treatment was significantly improved. In view of this, the TO coating is expected to provide wear resistance protection for pure titanium components, the presence of dimples reduced the friction coefficient of pure titanium components, and further extended their service life. The results may provide reference data for surface modification of TA2 by the laser surface texturing and thermal oxidation duplex treatment.

Sliding Wear Behavior of Forged, Uncoated and Laser Nitrided LMD TC18 Titanium Alloy

Dry sliding wear of MA/PM Al-10Ti alloy

Dry sliding wear of PM Al-10Ti alloy

Microstructure and Sliding Wear Behavior of PM Alloy Al10Ti after Thermal Exposure

Effect of Laser-Textured Surface of Ti6Al4V on Frictional Wear Behavior

Exploring the Friction and Wear Mechanisms of Nickel Titanium Alloy Fabricated by Laser Powder and Wire-Based Directed Energy Deposition

Microstructure and Wear Resistance of Ti-3zr-2sn-3mo-15nb (tlm) Alloy

High-Temperature Tribology of Selective Laser-Melted Titanium Alloys: Role of Adhesive Wear

Tribological Properties of Ti6Al4V Alloy Composite Texture Fabricated by Ultrasonic Strengthening Grinding and Laser Processing

Tailoring Tribological Performance of Pure Titanium by a Duplex Treatment of Laser Surface Texturing-Thermal Oxidation

Study of the Performance of Laser Melting Wear-Resistant Coatings on TC4 Titanium Alloy Surfaces

Enhanced wear resistance of Ti reinforced Inconel 718 superalloy manufactured by laser directed energy deposition

Microstructure and Wear Resistance of Ti5Si3/Ti3Al Composite Coatings Prepared by Laser Cladding on TA2 Titanium Alloy

Sliding and Fretting Wear Behavior of Biomedical Ultrafine-Grained TiNbZrTaFe/Si Alloys in Simulated Physiological Solution

Accelerated Formation of Tribo-oxide Layer and Its Effect on Sliding Wear of a Titanium Alloy

Ultra-low wear of titanium alloy surface under lubricated conditions achieved by laser texturing and simultaneous nitriding

Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces

Tribological Behavior of TiC Particles Reinforced 316Lss Composite Fabricated Using Selective Laser Melting

Thermal effects on wear behavior of additively manufactured NiTi shape memory alloys

Tribological Properties of Additive Manufactured Ti6Al4V Against Cemented Carbide under Dry Sliding Conditions

Microstructure and tribological properties of laser in-situ synthesized Ti3Al composite coating on Ti-6Al-4V