Abstract:Dynamic optimization of the fluid loop is critical of the active thermal control system (ATCS) for future spacecraft. In this paper, the transient heat current model of the parallel heat exchanger system is constructed by the thermoelectric analogy method to analyze the optimal control problem of dynamic flow allocation. The continuous free time optimal flow control problem is transformed into a fixed-time nonlinear programming problem which can be solved by the sequential quadratic programming (SQP) algorithm through the control variable parameterization (CVP) and time-scaling methods. The simulation showed that the optimized flow allocation significantly reduced the process time required for system heat dissipation. Compared with the non-gradient particle swarm optimization (PSO) algorithm, the SQP method constructed in this paper decreased the optimization index by about 4%∼6% and the calculation time by about one order of magnitude. To diminish the sensitivity of the SQP algorithm to the initial value, this paper simplifies the model according to the system characteristics. Through the Pontryagin extremum principle, it is found and proved that, under the simplified model, the optimal flow rates are a set of time-independent variables, which significantly reduces the difficulty of the optimization problem, according to which a hybrid algorithm is designed that uses the optimal result of the simplified model as the initial value predictor. Compared with the average of using the random initial value, using the estimated initial value decreased the optimization index by more than 2% and the computation time by about 60%, under the same SQP algorithm.

System Identification of Heat-Transfer Process of Frequency Induction Furnace for Melting Copper Based on Particle Swarm Algorithm

Identification of Time-Varying Delay Systems Using Particle Swarm Optimization

Parameter Identification of Synchronous Generator by Using Ant Colony Optimization Algorithm

Identification of DFIG parameters based on improved PSO algorithm

Nonlinear System Identification Using Particle Swarm Optimization

The Identification Research of Nonlinear System Based on PSO with Fuzzy Adaptive Inertia Weight

Parameter Identification of Nonlinear System Model Based on Bacterial Swarm Foraging for Optimization

Application of PSO for parameters Identification of Process Model

A Hybrid Multi-Objective Optimization Method and Its Application to Electromagnetic Device Designs

Determining the Heat Transfer Coefficient During the Continuous Casting Process Using Stochastic Particle Swarm Optimization

Particle Swarm Optimal Identification of Wiener Model and a Case Study

Parameter Identification for Electro-Hydraulic Servo Link Based on Particle Swarm Optimization

Optimization of electromagnetic problems by using a hybrid algorithm combining, the annealing evolution algorithm with the Hooke-Jeeves algorithm

Improved genetic programming for system identification

Parameter Identification For Wiener Model Using Particle Swarm Optimization With A Case Study

A System Identification Method Using Particle Swarm Optimization

Parameter Identification for Nonlinear Electro-Hydraulic Servo System Based on Multi-Particle Swarm Optimization

Combined fitness function based particle swarm optimization algorithm for system identification

Identification and Control of Nonlinear Systems by a Dissimilation Particle Swarm Optimization-Based Elman Neural Network

Dynamic optimization analyses and algorithm design for the parallel heat exchange system in spacecraft

Velocity-Controlled Particle Swarm Optimization (PSO) and Its Application to the Optimization of Transverse Flux Induction Heating Apparatus