Abstract:Among the existing unsupervised bridge damage detection methods, it is difficult to quantify bridge damage severity levels, although some of the methods can achieve the localization of bridge damage. In the existing research, the damage index (DI) curve is calculated by the monitoring point dynamic response (inclination or deflection) of the bridge in the damage state, and the localization of the bridge damage can be achieved by the DI curve without the need for damage labels. Based on this bridge damage localization method, this paper proposes an efficient bridge damage severity level quantification method. Since the different DI curves calculated under the same damaged state basically coincide with each other, the DI curves will change with the bridge-damaged state. Therefore, the quantification of the bridge damage severity level is achieved by only calculating DI curves of different damage degrees at the damage location. To efficiently calculate the DI curve, this paper proposes a method for generating the monitoring point dynamic response of the specified damage bridge. By the specified damage bridge finite element model (FEM) static simulation to obtain arbitrary vertical nodal loads and monitoring point responses of the relationship function, and then combined with the healthy state of the bridge monitoring point dynamic response can be generated monitoring point dynamic response of the specified damage bridge. Since the method in this paper is based on real measured data to calculate the DI curve, it is more robust to noise and modeling errors than the FEM dynamic simulation method, and the modeling of this method only needs to update the model stiffness parameter to reduce the modeling cost. In the example of this paper, the method of this paper calculates the DI curve of one damage state only needs about 7 s about 437 times the computational efficiency of the FEM dynamic simulation method, which can achieve the fast quantification of bridge damage severity levels. Numerical simulations demonstrate that the method can localize and quantify multi-damage in bridges under unknown loads, a small number of sensors, noise, and modeling errors. However, the method in this paper still has limitations that do not apply to the localization and quantification of bridge pier damage and nonlinear models.

Locate Damage in Long-Span Bridges Based on Stress Influence Lines and Information Fusion Technique

Damage Localization Of Long-Span Bridges By Integration Of Stress Influence Lines And Information Fusion Technique

Damage Detection in Long Suspension Bridges Using Stress Influence Lines

Influence Line-Based Damage Detection Technique for Long-Span Bridges

Damage Detection of Long-Span Bridges Using Stress Influence Lines Incorporated Control Charts

Experimental Study of Influence Line–Based Damage Localization for Long-Span Cable Suspension Bridges

Stress Influence Line Identification of Long Suspension Bridges Installed with Structural Health Monitoring Systems

Optimal Sensor Placement for Bridge Damage Detection Using Deflection Influence Line

Damage Detection Based on Structural Responses Induced by Traffic Load: Methodology and Application

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Bridge damage localization and quantification using deep learning and FEM static simulation

Identifying Damage in Long-Span Self-Anchored Suspension Bridges Using Characteristic Indices

A Strain Modal Flexibility Method to Multiple Slight Damage Localization Combined with a Data Fusion Technique

Damage detection of bridges by using displacement data of two symmetrical points

Simultaneous Identification Method of Damage and Vehicle Parameters on Bridges Utilizing Long-Gauge Strain Influence Line under Moving Vehicle Loads

Multi-Damage Identification of Multi-Span Bridges Based on Influence Lines

Serious Damage Localization of Continuous Girder Bridge by Support Reaction Influence Lines

On Damage Detection of Beam Structures Using Multiple Types of Influence Lines

Fusion of Structural Damage Identification Results from Different Test Scenarios and Evaluation Indices in Structural Health Monitoring

A Drive-by Bridge Damage Localisation Method with an Instrumented Vehicle

Strain-Based Damage-Assessment Method for Bridges under Moving Vehicular Loads Using Long-Gauge Strain Sensing