Abstract:With regard to frequent accidental chemical release in recent years, a risk assessment system of atmospheric environment and health with immediate response to the emergency incident should be designed in order to reduce the harm and losses. First of all, a widely -used dense gas dispersion model SLAB and one of the best public exposure guidelines AEGLs were briefly introduced. Then on the basis of these recognitions, we have organically combined the SLAB model with AEGLs in the construction of mentioned assessment system . This system can timely and effectively identify the distribution of hazardous zones that could make general public lethal, disabling, nondisabling etc. It is able to work out their corresponding statistics such as maximum half width, maximum depth and area. Furthermore, towards constructing the assessment system, a series of sensitivity tests were performed in terms of mode, species and duration of leakage as well as meteorological conditions (including ambient wind speed, ambient temperature, relative humidity and stability). The analysis showed that, (1) leakage mode, ambient temperature and relative humidity have a little effect on the distribution of hazardous zones; (2) due to the great difference between density and toxicity, different substances cause different distribution of hazardous zones, which mainly depends on the relative contribution of their effects; (3) when the total mass of leakage remains the same and duration of leakage is extended because of source control, total area distribution of hazardous zones can be reduced effectively; (4) strong ambient wind speed or instability will greatly constrict the total area of severe hazardous zones, i. e . lethal and disabling zones. However increasing ambient wind speed or instability produces nonlinear area of non-disabling zones and then it may lead to a wider range of injuries and losses. From these results, we may reasonably conclude that the distributions of hazardous zones are mainly dependent on factors such as species and duration of leakage, ambient wind speed and stability.

Method to Analyze the Regional Life Loss Risk by Airborne Chemicals Released after Devastating Earthquakes: A Simulation Approach

ASSESSMENT OF HUMAN RISKS POSED BY DEADLY DEBRIS FLOW IN THE WENCHUAN EARTHQUAKE AREA

Scenario-Driven Methodology for Cascading Disasters Risk Assessment of Earthquake on Chemical Industrial Park

Emergent Elimination and Safety Assessment of Chemical Risks after Earthquake Disaster

A Dynamic And Simulation-Based Method For Quantitative Risk Assessment Of The Domino Accident In Chemical Industry

Development of Risk Assessment System of Atmospheric Environment and Health for Accidental Chemical Release

An Innovative Quantitative Analysis Methodology for Natech Events Triggered by Earthquakes in Chemical Tank Farms

Risk Assessment Study of Fire Following an Earthquake: a Case Study of Petrochemical Enterprises in China

An integrated risk assessment method for urban areas due to chemical leakage accidents

Modeling Regional Atmospheric Risks of Petrochemical Park Planning

Adjoint Method for Assessment and Reduction of Chemical Risk in Open Spaces

Simulation and Assessment on Leakage Hazard from Gas Sweetening Unit of Sour Gas Processing Plant in Complex Terrain

A Synthetic Method for Atmospheric Diffusion Simulation and Environmental Impact Assessment of Accidental Pollution in the Chemical Industry in a WEBGIS Context

Quantitative Risk Analysis of Toxic Gas Release Caused Poisoning—a CFD and Dose–response Model Combined Approach

Risk assessment of a typical petrochemical plant with ageing effects subjected to seismic sequences

A novel approach for failure and consequence assessment considering multi-hazard coupling scenario in chemical industrial parks

Research on Facility Layout of Factories under Toxic Release Based on Monte-Carlo Simulation

Quantitative Risk Assessment of Acute Occupational Poisoning Caused by Liquefacient Ammonia Leaking from Refrigeration Equipment in Chemical Plant

Quantitative risk assessment model of hazardous chemicals leakage and application

Probabilistic Assessment of Earthquake Casualties in Residential Areas

Synergistic Effects on the Physical Effects of Explosions in Multi-Hazard Coupling Accidents in Chemical Industries