Abstract:An investigation of rock fracture characteristics subjected to the true triaxial intermediate principal stress is crucial for understanding the failure mechanism of surrounding rock in an actual underground engineering project and guiding the project’s implementation. In this study, a series of different true triaxial stress path tests were conducted to investigate the distribution of macroscopic rock fractures and internal cracks under various stress paths using a true triaxial servo test system and combining it with CT scanning technology. The results indicated that, due to the intermediate principal stress with constant direction, the true triaxial stress path has obvious directionality compared to the regular triaxial rock macroscopic and internal fracture distribution law and the fracture planes are aligned along the σ2 direction. Once the direction of the intermediate principal stress changes, the corresponding crack propagation direction immediately reverses and expands along the new intermediate principal stress direction. The direction of rock fracture is strongly dependent on the state (direction) of the intermediate principal stress, i.e., the direction of σ2 plays a decisive role in the macroscopic rock fracture characteristics. Accordingly, the “effect of intermediate principal stress-induced rock fracture” was proposed in this study. Based on the results of the CT scans in which the fracture dip angle within the rock is approximately parallel to the σ2 direction under different true triaxial paths, the intermediate principal stress plays a vital role in rock rupture. Combined with experimental and theoretical analyses, the rationality of this effect was verified. In addition, a numerical calculation method for the true triaxial rupture evolution of rocks with random fractures was proposed using ABAQUS software (version 2020), and a numerical calculation model for typical roadway excavation was developed. The rupture growth of the roadway surrounding rock was characterized by stratified evolution along the σ2 direction corresponding to the actual engineering. In addition, the numerical analysis of a typical roadway excavation with two different intermediate principal stress orientations indicated that the fracture of the surrounding rock in both kinds of roadways is roughly along the σ2 direction, which further supports the rationality of the “effect of intermediate principal stress-induced rock fracture.”

Failure Probability Model Considering the Effect of Intermediate Principal Stress on Rock Strength

Preliminary Study of Two-Scale Model for Analyzing Brittle Rock Based on Asymptotic Expansion Method

A damage-softening statistical constitutive model considering rock residual strength

Piecewise Linear Strength Models for Analyzing Multiple Failure Mechanisms in Rocks Materials

Numerical analysis for failure evolution process of rock with initial micro defects

Effect of Intermediate Principal Stress on Strength of Soft Rock under Complex Stress States

The Effect of the Intermediate Principal Stress on the Ultimate Bearing Capacity of a Foundation on Rock Masses

Study on statistical damage constitutive model of soft rock based on unified strength theory

Theoretical Model for the Shear Strength of Rock Discontinuities with Non-Associated Flow Laws

A New Perspective on the Constant Mi of the Hoek–Brown Failure Criterion and a New Model for Determining the Residual Strength of Rock

Study of the Failure Mechanism and Progressive Failure Process of Intact Rock Patches of Rock Slope with Weak Surfaces

A Three-Dimensional Statistical Damage Constitutive Model for Geomaterials

Analysis of influence of discontinuous plane on strength of rock mass based on unified strength theory

Study on the Evolution of Rock Fracture under True Triaxial Intermediate Principal Stress

Rock strength weakening subject to principal stress rotation: Experimental and numerical investigations

Constitutive Model of Rock Uniaxial Damage Based on Rock Strength Statistics

FAILURE PROBABILITY AND STRENGTH SIZE EFFECT OF QUASI-BRITTLE MATERIALS

ANISOTROPY OF STRENGTH OF ROCK MASS UNDER COMPLICATED STRESS STATE

STUDY OF ROCK UNIAXIAL COMPRESSION DEFORMATION AND FAILURE CHARACTER BASED ON AN IMPROVED WEIBULL DISTRIBUTION MODEL

An Elasto-Plastic Damage Model for Rocks Based on a New Nonlinear Strength Criterion

A True Triaxial Compression-Induced Microcracking Model for Evaluating Short-Term Progressive and Long-Term Creep Failures of Brittle Rock