Catalysis on a metal surface with a graphitic cover

qiang fu,xinhe bao

DOI: https://doi.org/10.1016/S1872-2067(15)60828-2

IF: 16.5

2015-01-01

Chinese Journal of Catalysis

Abstract:The surface reactivity of a metal can be modulated by placing a graphitic cover atop, and a concept of “Catalysis under Cover” has been suggested acting as a new route towards the modulation of surface reactions.

What problem does this paper attempt to address?

The Progress on Graphene-based Catalysis

Zuojun Wei,Yaxin Hou,Yao Yang,Yingxin Liu

DOI: https://doi.org/10.2174/1385272820666160624075801

2016-01-01

Current Organic Chemistry

Abstract:Graphene is an atomically thin, two-dimensional allotrope of carbon with excellent chemical, mechanical, and electronic properties. Recent studies have revealed that using graphene or modified graphene as a catalyst support or metal-free catalyst can result in significant improvement in the catalytic activity, selectivity, reusability and tolerance due to the unique structure of graphene. This review summarized the recent progress on the pre-paration of the graphene-based catalysts and their application in traditional chemical reactions, electrochemical reactions and photochemical catalysis. The perspectives of achieving graphene-based catalysts with high catalytic performance have also been included.
Graphene Cover-Promoted Metal-Catalyzed Reactions

Yunxi Yao,Qiang Fu,Y. Y. Zhang,Xuefei Weng,Huan Li,Mingshu Chen,Li Jin,Aiyi Dong,Rentao Mu,Peng Jiang,Li Liu,Hendrik Bluhm,Zhi Liu,S. B. Zhang,Xinhe Bao

DOI: https://doi.org/10.1073/pnas.1416368111

2014-01-01

Abstract:Graphitic overlayers on metals have commonly been considered as inhibitors for surface reactions due to their chemical inertness and physical blockage of surface active sites. In this work, however, we find that surface reactions, for instance, CO adsorption/desorption and CO oxidation, can take place on Pt(111) surface covered by monolayer graphene sheets. Surface science measurements combined with density functional calculations show that the graphene overlayer weakens the strong interaction between CO and Pt and, consequently, facilitates the CO oxidation with lower apparent activation energy. These results suggest that interfaces between graphitic overlayers and metal surfaces act as 2D confined nanoreactors, in which catalytic reactions are promoted. The finding contrasts with the conventional knowledge that graphitic carbon poisons a catalyst surface but opens up an avenue to enhance catalytic performance through coating of metal catalysts with controlled graphitic covers.
High-performance Heterogeneous Catalysis with Surface-Exposed Stable Metal Nanoparticles.

Ning Huang,Yanhong Xu,Donglin Jiang

DOI: https://doi.org/10.1038/srep07228

IF: 4.6

2014-01-01

Scientific Reports

Abstract:Protection of metal nanoparticles from agglomeration is critical for their functions and applications. The conventional method for enhancing their stability is to cover them with passivation layers to prevent direct contact. However, the presence of a protective shell blocks exposure of the metal species to reactants, thereby significantly impeding the nanoparticles' utility as catalysts. Here, we report that metal nanoparticles can be prepared and used in a surface-exposed state that renders them inherently catalytically active. This strategy is realised by spatial confinement and electronic stabilisation with a dual-module mesoporous and microporous three-dimensional π-network in which surface-exposed nanoparticles are crystallised upon in situ reduction. The uncovered palladium nanoparticles serve as heterogeneous catalysts that are exceptionally active in water, catalyse unreactive aryl chlorides for straightforward carbon-carbon bond formation and are stable for repeated use in various types of cross couplings. Therefore, our results open new perspectives in developing practical heterogeneous catalysts.
Carbon-Mediated Catalysis: Oxidative Dehydrogenation on Graphitic Carbon

Viviane Schwartz,Steven H. Overbury,Chengdu Liang

DOI: https://doi.org/10.1021/bk-2013-1132.ch010

2013-01-01

Abstract:Although carbon has been widely used in catalytic processes as a support material, very little is known about its function as an active catalyst. The scientific challenge is to achieve a detailed mechanistic understanding of the structural or chemical sites of the carbon that are catalytically active especially because of the very heterogeneous nature of carbon surfaces. This problem is complicated by the fact that there are limited tools to characterize the surface chemical and structural properties of carbon materials. This review highlights recent efforts from our group in utilizing well-defined synthetic nanostructure carbons in which surface properties can be controlled and systematically varied in order to identify their function for oxidative dehydrogenation reactions. Manipulation of exposed edge sites and oxygen functionalities are some of the aspects studied for controlling activity and selectivity on carbon catalysis.
Enhanced CO oxidation reaction over Pt nanoparticles covered with ultrathin graphitic layers

Lijun Gao,Qiang Fu,Zhenping Qu,Xinhe Bao

DOI: https://doi.org/10.1016/j.carbon.2016.01.100

IF: 10.9

2016-01-01

Carbon

Abstract:It has been empirically established that graphitic carbon deposits often result in deactivation of metal catalysts due to the physical blockage of surface active sites. Our recent surface science works however demonstrate that molecules such as CO can adsorb on Pt(111) surface covered by graphene overlayers via an intercalation process, and surface reactions e.g. CO oxidation have been enhanced by the graphene covers. In this work, supported Pt nanocatalysts were coated by ultrathin graphitic carbon layers through chemical vapor deposition process forming Pt@C core–shell nanostructures, which were confirmed by characterizations of Raman spectroscopy, temperature-programmed oxidation and transmission electron microscopy. CO oxidation over the Pt@C catalysts shows a lower apparent activation energy compared with the pure Pt catalysts, and in-situ infrared studies indicate that the reactions occur under the graphitic shells. The present results suggest that coating metal nanocatalysts with ultrathin graphitic overlayers may be used to promote metal catalyzed reactions.
Catalytic Scenarios Over Metal-Carbon Interaction Interface

Liwen Xing,Yujuan Jin,Yunxuan Weng,Yongjun Ji

DOI: https://doi.org/10.3389/fchem.2021.810147

IF: 5.5

2021-12-23

Frontiers in Chemistry

Abstract:Numerous efforts have been devoted to investigating the catalytic events and disclosing the catalytic nature of the metal-carbon interaction interface. Nevertheless, the local deconstruction of catalytically active metal-carbon interface was still missing. Herein, the selected four types of landmark catalytic paradigms were highlighted, which was expected to clarify their essence and thus simplify the catalytic scenarios of the metal-carbon interface—carbon-supported metal nanoparticles, carbon-confined single-atom sites, chainmail catalysis, and the Mott-Schottky effect. The potential challenges and new opportunities were also proposed in the field. This perspective is believed to give an in-depth understanding of the catalytic nature of the metal-carbon interaction interface and in turn provide rational guidance to the delicate design of novel high-performance carbon-supported metal catalysts.

chemistry, multidisciplinary
Opportunities for Electrocatalytic CO2 Reduction Enabled by Surface Ligands

Quansong Zhu,Catherine J Murphy,L Robert Baker

DOI: https://doi.org/10.1021/jacs.1c11500

2022-02-23

Abstract:To achieve high selectivity in enzyme catalysis, nature carefully controls both the catalyst active site and the pocket or environment that mediates access and the geometry of a reactant. Despite the many advantages of heterogeneous catalysis, active sites on a surface are rarely defined with atomic precision, making it difficult to control reaction selectivity with the molecular precision of homogeneous systems. In colloidal nanoparticle synthesis, structural control is accomplished using a surface ligand or capping layer that stabilizes a specific particle morphology and prevents nanoparticle aggregation. Usually, these surface ligands are considered detrimental for catalysis because they occupy otherwise active surface sites. However, a number of examples have shown that surface ligands can play a beneficial role in defining the catalytic environment and enhancing performance by a variety of mechanisms. This perspective summarizes recent advances and opportunities using surface ligands to enhance the performance of nanocatalysts for electrochemical CO2 reduction. Several mechanisms are discussed, including selective permeability, modulating interfacial solvation structure and electric fields, chemical activation, and templating active site selection. These examples inform strategies and point to emerging opportunities to design nanocatalysts toward molecular level control of electrochemical CO2 conversion.
Modifications in Subsurface of Catalysts: Impact of Bringing in Electrophilicity on Catalytic Applications

Safia Khan,Hu Li

DOI: https://doi.org/10.1002/slct.202403749

2024-10-04

ChemistrySelect

Abstract:Catalysis is a surface phenomenon; however, the processes occurring multiple layers below the catalyst's surface impart a huge influence upon catalysis. The introduction of second metal to subsurface forms interlayer, modifying the electronic and architectural geometry of the catalyst. The removal of low‐coordination sites and incorporating second metal induce an electrophilicity leading to boosted catalysis. Surface, interface, and subsurface in catalysts are broadly perceived as independent units in materials, relying on diverse bonding environments and are recurrently studied discretely because of experimental challenges in distinguishing the surface and subsurface effects. Metal crystals, isolated atoms, or metal nanoparticles in supported catalysts induce an electrophilic nature in subsurface, enhancing the catalysis efficiency. In this review, the influence of modification in subsurface of catalysts and their specific catalytic outputs are discussed. Key approaches and techniques for insertion of subsurface modifications and impact of electrophilicity upon catalysis upgradation are observed. A compilation of frequently used chemical reactions catalyzed by subsurface‐modified catalysts have been structured and thoroughly illustrated.

chemistry, multidisciplinary
Hexagonal Boron Nitride Cover on Pt(111): a New Route to Tune Molecule-Metal Interaction and Metal-Catalyzed Reactions.

Yanhong Zhang,Xuefei Weng,Huan Li,Haobo Li,Mingming Wei,Jianping Xiao,Zhi Liu,Mingshu Chen,Qiang Fu,Xinhe Bao

DOI: https://doi.org/10.1021/acs.nanolett.5b01205

IF: 10.8

2015-01-01

Nano Letters

Abstract:In heterogeneous catalysis molecule-metal interaction is often modulated through structural modifications at the surface or under the surface of the metal catalyst. Here, we suggest an alternative way toward this modulation by placing a two-dimensional (2D) cover on the metal surface. As an illustration, CO adsorption on Pt(111) surface has been studied under 2D hexagonal boron nitride (h-BN) overlayer. Dynamic imaging data from surface electron microscopy and in situ surface spectroscopic results under near ambient pressure conditions confirm that CO molecules readily intercalate monolayer h-BN sheets on Pt(111) in CO atmosphere but desorb from the h-BN/Pt(111) interface even around room temperature in ultrahigh vacuum. The interaction of CO with Pt has been strongly weakened due to the confinement effect of the h-BN cover, and consequently, CO oxidation at the h-BN/Pt(111) interface was enhanced thanks to the alleviated CO poisoning effect.
Controllably Interfacing with Metal: A Strategy for Enhancing CO Oxidation on Oxide Catalysts by Surface Polarization

Yu Bai,Wenhua Zhang,Zhenhua Zhang,Jie Zhou,Xijun Wang,Chengming Wang,Weixin Huang,Jun Jiang,Yujie Xiong

DOI: https://doi.org/10.1021/ja506269y

IF: 15

2014-01-01

Journal of the American Chemical Society

Abstract:Heterogeneous catalysis often involves charge transfer from catalyst surface to adsorbed molecules, whose activity thus depends on the surface charge density of catalysts. Here, we demonstrate a unique solution-phase approach to achieve controllable interfacial lengths in oxide-metal hybrid structures. Resulting from their different work functions, surface polarization is induced by the Ag-CuO interface and acts to tailor the surface charge state of CuO. As a result, the designed hybrid catalysts exhibit enhanced intrinsic activities in catalyzing CO oxidation in terms of apparent activation energy, as compared with their counterparts. Moreover, the CO conversion rate can be enhanced by maximizing the Ag-CuO interfacial length and thus the number of active sites on the CuO. This work provides a new strategy for tuning catalytic performance by controlling interface in hybrid catalysts.
Surface/Interfacial Catalysis of (metal)/oxide System: Structure and Performance Control

Wu Jiang,Weijie Ji,Chak‐Tong Au

DOI: https://doi.org/10.1002/cctc.201701958

IF: 4.5

2018-01-01

ChemCatChem

Abstract:AbstractSurface/interfacial catalysis on a series of oxide substrates and metal/oxide interfaces has been reviewed. Special attention has been paid to those systems in which the oxide substrates are structurally defined with certain exposed facets, and the metal assembling is well controlled with desired particle size and narrow particle size distribution. The distinct catalytic behaviors over the selected systems have been discussed in line with their specific surface/interfacial structure features as well as other surface properties. The tactics and cations how to build up the novel metal/oxide interfacial structures are provided, and the guideline for extended reaction exploration is also suggested. Success in structure and performance control on these important systems is highly valuable for designing more selective and efficient catalyst in practical applications.
Surface Chemistry of Co on Ru(0001) under the Confinement of Graphene Cover

Li Jin,Qiang Fu,Aiyi Dong,Yanxiao Ning,Zhoujun Wang,Hendrik Bluhm,Xinhe Bao

DOI: https://doi.org/10.1021/jp5034855

2014-01-01

Abstract:In heterogeneous catalysis, graphitic carbon formed on metal often poisons metal-catalyzed reactions through physical blockage of surface active sites. In materials science, recent works show that graphene overlayers can passivate metal surfaces acting as gas-impermeable protection coatings. However, here we show using in situ surface electron microscopy and photoemission spectroscopy that CO can be readily trapped inside the two-dimensional space between the graphene overlayer and Ru(0001) surface under near-ambient conditions. The intercalated CO molecules effectively decouple the graphene overlayer from the Ru substrate. Meanwhile, the graphene cover exerts a strong confinement effect on the surface chemistry of CO on Ru(0001), showing that a high-coverage CO adlayer can be kept at the graphene/Ru interface at room temperature which desorbs intensively and completely around 390 K. This finding challenges the traditional concept of graphene films as passivation layers, indicating that the surface graphitic carbon can be used to modify the surface chemistry of metals.
Confined Catalysis Under Two-Dimensional Materials

Haobo Li,Jianping Xiao,Qiang Fu,Xinhe Bao

DOI: https://doi.org/10.1073/pnas.1701280114

2017-01-01

Abstract:Confined microenvironments formed in heterogeneous catalysts have recently been recognized as equally important as catalytically active sites. Understanding the fundamentals of confined catalysis has become an important topic in heterogeneous catalysis. Well-defined 2D space between a catalyst surface and a 2D material overlayer provides an ideal microenvironment to explore the confined catalysis experimentally and theoretically. Using density functional theory calculations, we reveal that adsorption of atoms and molecules on a Pt(111) surface always has been weakened under monolayer graphene, which is attributed to the geometric constraint and confinement field in the 2D space between the graphene overlayer and the Pt(111) surface. A similar result has been found on Pt(110) and Pt(100) surfaces covered with graphene. The microenvironment created by coating a catalyst surface with 2D material overlayer can be used to modulate surface reactivity, which has been illustrated by optimizing oxygen reduction reaction activity on Pt(111) covered by various 2D materials. We demonstrate a concept of confined catalysis under 2D cover based on a weak van der Waals interaction between 2D material overlayers and underlying catalyst surfaces.
Controllable in Situ Surface Restructuring of Cu Catalysts and Remarkable Enhancement of Their Catalytic Activity

Xiaohui He,Yong Wang,Xun Zhang,Mei Dong,Guofu Wang,Bingsen Zhang,Yiming Niu,Siyu Yao,Xin He,Haichao Liu

DOI: https://doi.org/10.1021/acscatal.8b04812

IF: 12.9

2019-01-01

ACS Catalysis

Abstract:Supported metal catalysts play a pivotal role in the production of fuels and chemicals and environmental remediation. However, identification and tailoring of the active metal sites on these catalysts still remain a formidable challenge, primarily due to their dynamic nature in catalytic reactions. Here, we report a simple and effective strategy for tuning supported Cu nanoparticles via controllable in situ surface restructuring to form coordinatively more unsaturated Cu sites, which exhibit a 4-fold increase in catalytic turnover rate and high stability, as probed by the ethanol dehydrogenation reaction. In situ measurements by transmission electron microscopy and X-ray absorption spectroscopy reveal intense phase transformation and consequent dynamic restructuring of Cu nanoparticles, induced by oxidation with temporarily added nitrous oxide and subsequent reduction under reaction conditions. Such restructuring is precisely controlled at the Cu surfaces without altering Cu dispersion, oxidation state, etc., enabling us to unambiguously identify the active sites during catalysis. This strategy, an alternative to many sophisticated synthesis methods, has been shown to be effective for engineering different Cu catalysts and in turn markedly enhancing their catalytic activity for a wide range of reactions varying from alcohol dehydrogenation to methanol steam reforming.
Conductive catalysis by subsurface transition metals

Xin Deng,Caiyan Zheng,Yangsheng Li,Zeyu Zhou,Jiamin Wang,Yihua Ran,Zhenpeng Hu,Fan Yang,Landong Li

DOI: https://doi.org/10.1093/nsr/nwae015

2024-01-11

Abstract:The nature of catalysis has been hotly pursued for over a century, and current research is focused on understanding active centers and their electronic structures. Herein, the concept of conductive catalysis is proposed and verified by theoretical simulations and experimental observations. Metallic systems containing buried catalytically active transitional metals and exposed catalytically inert main group metals are constructed, and the electronic interaction between them via metallic bonding is disclosed. Through the electronic interaction, the catalytic properties of subsurface transitional metals (Pd or Rh) can be transferred to outermost main group metals (Al or Mg) for several important transformations like semi-hydrogenation, Suzuki-coupling and hydroformylation. The catalytic force is conductive, in analogy with the magnetic force and electrostatic force. The traditional definition of active centers is challenged by the concept of conductive catalysis and the electronic nature of catalysis is more easily understood. It might provide new opportunities for shielding traditional active centers against poisoning or leaching and allow for precise regulation of their catalytic properties by the conductive layer.
Surface Atomic Regulation of Core-Shell Noble Metal Catalysts.

J. Ge,Zhijun Li,Xun Hong,Yadong Li

DOI: https://doi.org/10.1002/chem.201805332

2019-01-01

Chemistry

Abstract:Core-shell noble metal catalysts have gained significant attention in the past few decades, as they not only reduce the use of noble metals effectively but also exhibit unique properties derived from the synergistic effect between core and shell metals. In particular, regulating the surface structure of shells to maximize the atomic utilization efficiency of noble metals is critically important. Controlling the shell thickness of noble metal catalysts at the atomic level as an efficient approach to realize this goal has been attracting growing attention; this approach involves the formation of ultrathin shells (typically 2-6 atomic layers), monolayers, or even atomically dispersed noble metals embedded in the host metal. These strategies drive the core/support metals to improve the number of active sites and the intrinsic activity of the deposited noble metals remarkably, meanwhile minimizing the usage of noble metals. Herein, recent advances regarding atomic control of the core-shell noble metal catalysts is reviewed, with focus on the surface regulation. First, synthesis methods and surface structures are summarized, and then catalytic applications of these architectures are highlighted.
Robust Catalysis on 2D Materials Encapsulating Metals: Concept, Application, and Perspective.

Jiao Deng,Dehui Deng,Xinhe Bao

DOI: https://doi.org/10.1002/adma.201606967

IF: 29.4

2017-01-01

Advanced Materials

Abstract:Great endeavors are undertaken to search for low-cost, rich-reserve, and highly efficient alternatives to replace precious-metal catalysts, in order to cut costs and improve the efficiency of catalysts in industry. However, one major problem in metal catalysts, especially nonprecious-metal catalysts, is their poor stability in real catalytic processes. Recently, a novel and promising strategy to construct 2D materials encapsulating nonprecious-metal catalysts has exhibited inimitable advantages toward catalysis, especially under harsh conditions (e.g., strong acidity or alkalinity, high temperature, and high overpotential). The concept, which originates from unique electron penetration through the 2D crystal layer from the encapsulated metals to promote a catalytic reaction on the outermost surface of the 2D crystal, has been widely applied in a variety of reactions under harsh conditions. It has been vividly described as "chainmail for catalyst." Herein, recent progress concerning this chainmail catalyst is reviewed, particularly focusing on the structural design and control with the associated electronic properties of such heterostructure catalysts, and also on their extensive applications in fuel cells, water splitting, CO2 conversion, solar cells, metal-air batteries, and heterogeneous catalysis. In addition, the current challenges that are faced in fundamental research and industrial application, and future opportunities for these fantastic catalytic materials are discussed.
Surface and interface design for heterogeneous catalysis.

Weixin Huang,Wei-Xue Li

DOI: https://doi.org/10.1039/c8cp05717f

IF: 3.3

2019-01-01

Physical Chemistry Chemical Physics

Abstract:Surface and interface designs are an efficient strategy to fabricate innovative and advanced catalysts. A prerequisite for this is a fundamental understanding of the structure-performance relations of catalyst nanoparticles, which, however, remains a formidable challenge due to the complexity of heterogeneous catalysis. Recent progresses in catalytic nanocrystals with uniform and well-defined structures, in situ characterization techniques, and theoretical calculations have offered opportunities for the fundamental studies of heterogeneous catalysis, and the achieved outputs are turning the innovation of efficient catalysts via surface and interface designs into a reality. Herein, the recent advances in the fundamental-understanding-directed rational surface and interface designs for heterogeneous catalysis, including crystal phase design, morphology/facet design, and size design, are presented. Perspectives are also discussed for the innovation of efficient catalysts via the fundamental-understanding-directed surface and interface designs followed by controlled synthesis.
Surface Polarity Induced Simultaneous Enhancement of Nanopore Accessibility and Metal Utilization in Metal and Nitrogen Co-Doped Carbon Electrocatalysts for CO 2 Reduction

Xu Hu,Ling-Yu Dong,Yong-Qi Ren,Wen-Cui Li,Martin Oschatz,Guang-Ping Hao,An-Hui Lu

DOI: https://doi.org/10.1021/acsanm.3c01172

IF: 6.14

2023-05-22

ACS Applied Nano Materials

Abstract:The efficient utilization of active centers for the emerging class of metal (M) and nitrogen (N) co-doped carbon (M–N–C) catalysts remains a research hotspot for electrochemical synthesis such as the reduction reactions of CO2, O2, N2, or functional groups in organic molecules. However, keeping sufficient accessibility to these active centers upon thermal treatment at high temperatures can be challenging due to possible nanopore blocking issues. To tackle this limitation, this work presents a precise surface modulation approach based on a kind of porous carbon support with an ultrapolar surface, over which the unusual enhancement of nanopore accessibility and metal utilization is achieved. The strategy is well applicable to transition metals, precious metals, and rare earth metals. Experimental evidence revealed that the ultrapolar pore walls can be spontaneously wetted by hydrated metal ions. The unprecedented wettability ensured a unique metal-support interaction, which not only warrants the anchoring metal species in a dispersed manner but also induces the development of transport nanopores by dynamical etching of the polar carbon walls during thermal treatment. By this way, this strategy addresses the trade-off issue between metal utilization efficiency and accessibility to the active centers for the M–N–C type catalysts.

materials science, multidisciplinary,nanoscience & nanotechnology
Surface restructuring in AgCu single-atom alloy catalyst and self-enhanced selectivity toward CO2 reduction

Hailing Wang,Xiangji Zhou,Tianshui Yu,Xianglong Lu,Lihua Qian,Pan Liu,Pengxiang Lei

DOI: https://doi.org/10.1016/j.electacta.2022.140774

IF: 6.6

2022-09-01

Electrochimica Acta

Abstract:Single atom alloy catalysts, consisting of trace amount of isolated solute atoms alloyed into the host matrix, provide a promising approach to tune the electronic structure and performance of bimetallic catalysts for breaking the limits of scaling relationships based on the unique electronic structures. However, the precisely as-synthesized surface usually suffers from surface evolution leading to activity and durability decay. Herein, the understanding of surface restructuring under reaction conditions is of great importance in optimizing catalytic performance of bimetallic catalysts. In this work, on account of the surface evolution of Cu in electrochemical reactions and its limited miscibility in Ag, a nanoporous AgCu single atom alloy catalyst with atomic ratio Cu:Ag = 1:110 is fabricated by chemical dealloying process. And a CO2-reduction-induced surface restructuring is achieved upon the well-designed catalyst. Noteworthily, nanoporous AgCu exhibits self-reinforcing selectivity toward CO2 reduction and suppressed hydrogen evolution in parallel with migration of Cu to the surface, although the charge transfer from Ag to Cu results in a strong tendency toward hydrogen evolution at the initial catalytic stage. By combining in situ electrochemical hypersensitive response to surface state with ex situ characterizations, the surface reconstruction is verified to be driven by electrochemical reduction of CO2 rather than hydrogen evolution reaction, and can be modulated by the applied potential. Well-reconstructed nanoporous AgCu facilitates the adsorption of CO2. Electronic effect of the restructuring of Cu enhances CO desorption ability on the surface. Consequently, electronic and geometric effects synergically lead to excellent performances with CO Faradaic efficiency of 97.5%. The insights gained from the reconstruction-induced self-reinforcing behavior of bimetallic electrocatalyst shall offer an avenue to rationally design bimetallic electrocatalysts for electrochemical CO2 reduction.

electrochemistry

Catalysis on a metal surface with a graphitic cover

The Progress on Graphene-based Catalysis

Graphene Cover-Promoted Metal-Catalyzed Reactions

High-performance Heterogeneous Catalysis with Surface-Exposed Stable Metal Nanoparticles.

Carbon-Mediated Catalysis: Oxidative Dehydrogenation on Graphitic Carbon

Enhanced CO oxidation reaction over Pt nanoparticles covered with ultrathin graphitic layers

Catalytic Scenarios Over Metal-Carbon Interaction Interface

Opportunities for Electrocatalytic CO2 Reduction Enabled by Surface Ligands

Modifications in Subsurface of Catalysts: Impact of Bringing in Electrophilicity on Catalytic Applications

Hexagonal Boron Nitride Cover on Pt(111): a New Route to Tune Molecule-Metal Interaction and Metal-Catalyzed Reactions.

Controllably Interfacing with Metal: A Strategy for Enhancing CO Oxidation on Oxide Catalysts by Surface Polarization

Surface/Interfacial Catalysis of (metal)/oxide System: Structure and Performance Control

Surface Chemistry of Co on Ru(0001) under the Confinement of Graphene Cover

Confined Catalysis Under Two-Dimensional Materials

Controllable in Situ Surface Restructuring of Cu Catalysts and Remarkable Enhancement of Their Catalytic Activity

Conductive catalysis by subsurface transition metals

Surface Atomic Regulation of Core-Shell Noble Metal Catalysts.

Robust Catalysis on 2D Materials Encapsulating Metals: Concept, Application, and Perspective.

Surface and interface design for heterogeneous catalysis.

Surface Polarity Induced Simultaneous Enhancement of Nanopore Accessibility and Metal Utilization in Metal and Nitrogen Co-Doped Carbon Electrocatalysts for CO 2 Reduction

Surface restructuring in AgCu single-atom alloy catalyst and self-enhanced selectivity toward CO2 reduction