Abstract:In this paper, we present a novel optical sensor based on photonic crystal slot nanobeam cavity (PCSNC) with rectangular air holes. By introducing a continuous slot and quadratically modulated hole spacing (lattice constant a) structure, the majority of the optical field is localized in the slot region, which enhances the light-matter interaction. With applying the three dimensional finite-difference time-domain (3D-FDTD) simulations, three key geometric parameters (hole width wx, slot width ws and the number of the holes N) are optimized to achieve a high sensitivity (S) while keeping a high quality (Q) factor. The highest S over 1000nm/RIU (refractive index unit) is achieved when the slot width equals to 200nm. The highest Q-factor of 2.15×107 is obtained when 30 holes are placed on both sides of the host waveguide with the slot width of 80nm. Considering the transmission efficiency and the trade-off between S and Q-factor, the slot width and the number of the tapered region are chosen as 80nm and 20, respectively. A high S approximately 835nm/RIU and a Q-factor about 5.50×105 with small effective mode volume of 0.03(λ/nair)3 are achieved simultaneously, resulting in an ultra-high figure-of-merit (FOM) above 2.92×105. Furthermore, the active sensing region of the optimized structure occupies only about 12µm×0.08µm, which makes the device attractive for realizing on-chip integrated sensor arrays.

Refractive Index Sensing Utilizing Parallel Tapered Nano-Slotted Photonic Crystal Nano-Beam Cavities

Refractive Index Sensing Utilizing Photonic Crystal Nano-Beam Cavity with Slotted Stack

Analysis and Design of Refractive Index Biosensors Based on Single Silicon Nanobeam Cavity

Photonic Crystal Nanoslotted Parallel Quadrabeam Integrated Cavity for Refractive Index Sensing with High Figure of Merit

Design of Simultaneous High-Q and High-Sensitivity Photonic Crystal Refractive Index Sensors

Ultrahigh-Q and Low-Mode-Volume Parabolic Radius-Modulated Single Photonic Crystal Slot Nanobeam Cavity for High-Sensitivity Refractive Index Sensing

High Q One-Dimensional Photonic Crystal Slot Nanobeam Cavity For High-Sensitivity Refractive Index Sensing

High Quality Factor and High Sensitivity Photonic Crystal Rectangular Holes Slot Nanobeam Cavity with Parabolic Modulated Lattice Constant for Refractive Index Sensing

Parabolic Tapered Coupled Two Photonic Crystal Nanobeam Slot Cavities for High-FOM Biosensing

Control of Fano Resonances in Photonic Crystal Nanobeams Side-Coupled with Nanobeam Cavities and Their Applications to Refractive Index Sensing

Refractive Index Sensor Based on Photonic Crystal Nanocavity

Slotted photonic crystal nanobeam cavity with parabolic modulated width stack for refractive index sensing.

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Broad FSR and High Sensitivity Refractive Index Sensor Using Photonic Crystal Nanobeam Cavity with Composite Lattice Cells

Photonic Crystal Nanobeam Air-mode Cavity for High-Q and High Sensitivity Refractive Index Sensing

Integrated High-Q Optomechanical Nanobeam Cavity for Refractive Index Sensing

Nanoslotted Microring Resonator for High Figure of Merit Refractive Index Sensing

Simultaneous sensing of refractive index and temperature based on a three-cavity-coupling photonic crystal sensor

High-Q Photonic Crystal Nanofiber Cavity Design and Application of Refractive Index Sensing

Ingaasp Photonic Crystal Slot Nanobeam Waveguides for Refractive Index Sensing

Suspended Slotted Photonic Crystal Cavities for High-Sensitivity Refractive Index Sensing