Abstract:Supercritical CO 2 is used as an important lubricant in Brayton cycle turbomachinery, and the study of lubricant flow and heat transfer mechanisms plays a crucial role in the lubrication performance of Supercritical CO 2 . To improve the thermal environment and load capacity performance of lubrication in turbomachinery, the turbulence models and real gas models were used in this work to numerically simulate the evolution of lubrication flow and thermal characteristics of CO 2 from low pressure to supercritical condition. Simulations were conducted under various operating parameters and lubrication conditions. The rarefaction effect, viscous heat, compression heat and tribological performance were analyzed. The findings indicate that the lubrication film temperature characteristics of low operating pressure depended on the viscous heat dissipation. Under the effect of rarefaction, the CO 2 lubrication pressure maximum decreased of 3.0 %. As the operating pressure increased to the supercritical condition, the compression heat effect of SCO 2 lubricating film increased and dominated the temperature distribution characteristics of the lubricating film. High operating pressure enhanced the pressure and load capacity of the lubrication film, and reduced the maximum lubrication temperature by 7.2 K. However, it was observed that near the critical temperature, fluctuations in the load capacity and friction torque of the lubricating film damaged the stable operation of the rotor. The change in lubrication film thickness has a significant impact on the load capacity and viscous heat dissipation, with variations as high as 81.4 % and 82.6 %, respectively. The research results provide guidance for the selection of operating pressure and temperature within the lubrication film, thereby improving the thermal working environment and operational stability of the rotor and stator.

Predictions of in-tube cooling pressure drops for CO 2 mixed with lubricating oil at supercritical pressures

Predictions of In-Tube Cooling Heat Transfer Coefficients and Pressure Drops of CO2 and Lubricating Oil Mixture at Supercritical Pressures

Flow and convection heat transfer characteristics of CO2 mixed with lubricating oil at super-critical pressures in small tube during cooling

INFLUENCE OF LUBRICATING OIL ON HEAT TRANSFER OF SUPERCRITICAL CO_2 DURING COOLING

Experimental investigations on cooling heat transfer of CO2-lubricant mixtures in horizontal tubes at supercritical pressure: A review

Measurement and correlation of frictional two-phase pressure drop of R410A/POE oil mixture flow boiling in a 7mm straight micro-fin tube

Flow and thermo-hydrodynamic characteristics in supercritical CO 2 lubrication

Flow and Thermo-Hydrodynamic Characteristics in Supercritical CO2 Lubrication

Comparisons of heat transfer and pressure drop correlations for in-tube cooling of CO_2 in supercritical region

Experimental study of in-tube cooling heat transfer and pressure drop characteristics of R134a at supercritical pressures

Effect of Oil on Two-Phase Pressure Drop of Refrigerant Flow Boiling Inside Circular Tubes Filled with Metal Foam

Experimental and Simulation Investigation on Heat Transfer Characteristics of In-Tube Supercritical CO2 Cooling Flow

Experimental Investigation and Correlation of Two-Phase Frictional Pressure Drop of R410A–oil Mixture Flow Boiling in a 5 Mm Microfin Tube

The Influence of Oil on Pressure Drop of R410A Flow Condensation in Small Diameter Microfin Tube

Pressure Drop Characteristics of R410a-Oil Mixture Flow Boiling in Small Smooth Tubes

Experimental study on the pressure drop characteristics of a supercritical CO2/R134a mixture in a rectangular microchannel

Predictions of Heat Transfer Coefficients and Pressure Drops to Supercritical Pressure Hcfc22 Flowing in A Small Tube

Experimental Study of Heat Transfer and Pressure Drop of Supercritical CO2 Cooled in Metal Foam Tubes

Measurement and correlation of frictional pressure drop of R-410A/oil mixture flow boiling in a 7 mm straight smooth tube

EXPERIMENTAL INVESTIGATION OF THE PRESSURE DROP OF CO 2 FLOW AT SUPERCRITICAL PRESSURES IN A HEATED 4 MM SMOOTH PIPE WITH DIFFERENT ORIENTATIONS

Experimental research of frictional performance of R410A-oil mixture flow condensation inside a 5 mm internally spiral grooved enhanced tube