Abstract:Facile surface micro/nanostructuring techniques for additively-manufactured (AM) aluminum alloy (AlSi10Mg) have recently been developed. The structuring techniques are not only highly scalable, but they also enable the tailoring of structure length scale and morphology to enhance pool boiling heat transfer coefficient. Our past study revealed that the structure cavity size of 5 μm is favorable for bubble nucleation during pool boiling of dielectric fluid, HFE-7100, resulting in significant enhancements in the heat transfer coefficients ( h ). However, owing to the differences in thermophysical properties between different coolant fluids, including saturation temperature, latent heat of vaporization and surface tension, the required structure size range for bubble nucleation and capillary wicking force for liquid re-supply are expected to differ significantly. To explore the effect of structure length scale on the pool boiling performance of coolants with different thermophysical properties, this work develops a new surface structuring technique consisting of a dual-stage metallurgic heat treatment process and single-stage crystallographic etching process to tune the structure length scale across nearly two orders of magnitude, viz. , from 0.3 to 15 μm. Using coolant media of vastly different thermophysical properties, i.e., dielectric fluid HFE-7100 and deionized water, we show that while microcavities with sizes ranging from 3 to 8 μm are favorable bubble nucleation sites for boiling of HFE-7100, which result in the enhancement of the maximum heat transfer coefficient ( h max ) by 83.4 to 103.8 % as compared to a conventional plain Al6061 surface, larger microcavity sizes of 10 to 15 μm are required to effectively promote bubble nucleation of water. This large microcavity size range of 10 to 15 μm, produced through rational nanoparticle agglomeration of the rich Si-phase in AM AlSi10Mg in elevated temperature, followed by an indirect removal process using a chemical process, is found to significantly increase h max of water by up to 259.9 % as compared to conventional nanostructures formed on Al6061. In addition, the new AM structured surfaces also exhibit up to 26.6 % enhancement in critical heat flux (CHF) as compared to highly-wicking conventional nanostructured Al6061. In summary, by utilizing scalable fabrication techniques to tailor the structure length scale on AM AlSi10Mg, this work not only reveals the favorable microcavity sizes for bubble nucleation of different coolant fluids to enhance boiling, but it also provides useful micro/nanostructure design guidelines that can be adopted to enhance boiling of other coolants and phase change applications.

Pool Boiling Heat Transfer Enhancement by Porous Interconnected Microchannel Nets at Different Liquid Subcooling

Enhanced pool boiling heat transfer during quenching on micro/nanostructured wicking surface: effects of submicron-scale substructures

Pool boiling heat transfer of dual-scale porous microchannel for high-power electronics cooling

Pool boiling inside micro-nano composite pores: Thermofluids behaviors and heat transfer enhancement

Synergistic Effects of Hydrophilic-Hydrophobic Porous Structures for Enhancing Nucleate Pool Boiling Heat Transfer

Enhanced pool boiling on composite microstructured surfaces with microcavities on micro-pin-fins

Enhanced pool boiling heat transfer characteristics on microstructured copper surfaces coated with hybrid nanofluid

Experimental study on pool boiling enhancement by unique designing of porous media with a wettability gradient

Pool Boiling Enhancement Via Surface Engineering for Thermal Management

Enhanced pool boiling on micro-nano composited surfaces with nanostructures on micro-pin-fins

Three-Tier Hierarchical Structures for Extreme Pool Boiling Heat Transfer Performance

Enhanced Boiling Heat Transfer on Composite Porous Surface

Composite porous surfaces of microcavities for enhancing boiling heat transfer

The microchannel combined hydrophobic nanostructure for enhancing boiling heat transfer

Boiling Heat Transfer with a Well-Ordered Microporous Architecture

Simulation on pool boiling heat transfer considering the integrated effect of engineered microchannels and mixed wettability

The synergistic effect of micro/nanostructure length scale and fluid thermophysical properties on pool boiling heat transfer

Subcooled pool boiling performance on conical micro-pillars structures surfaces

Highly efficient pool boiling heat transfer on surfaces with zoned rose-petal-inspired hierarchical structures

Hybrid Micro-Nano Structured Thermal Interfaces for Pool Boiling Heat Transfer Enhancement

Liquid Super‐Spreading Boosted High‐Performance Jet‐Flow Boiling for Enhancement of Phase‐Change Cooling