Abstract:Polypropylene is one of the well-known and multi-use thermoplastic materials because of its distinctive mechanical properties. On the other hand, it has deficiencies in the impact property at low temperatures. Several methods have been proposed and introduced to improve and overcome such deficiencies; one of them is the combination of isotactic homopolymer polypropylene and ethylene-propylene random copolymer (EPR) with a high ethylene content, which is usually created by consecutive polymerization in at least two reactors, to form a polymer called impact copolymer polypropylene (ICP). The distinctive properties of this type of ICP polymer made it an important material in various fields. The standard polypropylene impact copolymer, or "ICP," is created as described above with a high ethylene content. However, the markets for these applications are calling for better levels of performance than those offered by PP homopolymer "HPP". Notwithstanding the benefits of ICPs over HPP, there may be even more particular requirements for ICP features such impact/stiffness balance (I/S) and others, depending on the ultimate application. The maximum EPR level and highest isotacticity from the homopolymer continuous phase to manage the I/S balance, however, are both constrained by existing technology. The majority of earlier studies attempted to improve the ICP by melt blending it with materials that had the desired qualities, ideally materials from the same family, such as polyolefin or other families. In this study, ICP and PP homopolymer have been blended in a variety of ways and using the same weight percentages (Wt%). Different HPP grades with different melt flow, i.e., molecular weights, were utilized as a discontinuous phase in the final blend at a level of about 0.25%. Different ICP grades with varying ethylene-rubber phase and molecular weight were used as the continuous phase. The final blends were compounded, pelletized, and injection molded to manufacture finished components and/or samples for laboratory testing and analysis. Surprisingly, it has been discovered that discontinuous phases with varying molecular weights from the same family can operate as impact boosters or "plasticizer" at levels below 0.5% weight to enhance the impact resistance. Additional details on the improved sample, with different percentage of blends such as 0.5% and 1%, have been performed to investigate whether a further change in mixture composition could further improve the impact strength properties; the obtained values confirm that the improvement occurs when the level of the particular minor phase, i.e., HPP, is below 5 wt.%. The acquired findings were assessed and concluded that, for a given formulation, they revealed a well-dispersed rubber composition and consistent particle size distribution, which clearly improved the impact resistance by around 33% above the value of the virgin ICP.

Ethylene–Propylene Segmented Copolymer As an in Situ Compatibilizer for Impact Polypropylene Copolymer: an Assessment of Rheology and Morphology

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Morphology, Microstructure and Compatibility of Impact Polypropylene Copolymer

Simultaneously enhancing strength and toughness for impact polypropylene copolymers by regulating the dispersed phase with high density polyethylene

A Model for the Structures of Impact Polypropylene Copolymers Produced by an Atmosphere-Switching Polymerization Process

Microstructure, morphology, crystallization and rheological behavior of impact polypropylene copolymer

Effects Of Styrene-Ethylene/Propylene Diblock Copolymer (Sep) On The Compatibilization Of Pp/Ps Blends

Miscibility of isotactic polypropylene with random and block ethylene-octene copolymers studied by atomic force microscopy-infrared

Improving of impact copolymer PP (ICP) blends properties via compounding

Synergistic Toughening of Iso‐polypropylene with High‐density Polyethylene and Polycyclooctene Synthesized by ROMP

Phase Morphology and Impact Toughness of Impact Polypropylene Copolymer

Structure, Properties, and Mechanism of Reactive Compatibilization of Epoxy to Polyphenylene Sulfide/Polyamide Elastomer

The effect of interfacial adhesion on the impact strength of immiscible PP/PETG blends compatibilized with triblock copolymers

Simultaneous Promotion of the Mechanical Flexibility and Dielectric Strength of Impact Polypropylene Copolymers Containing Multifold H-Shape Long-Chain-Branching Structures for Recyclable Power Cable Insulation Application

Dynamic Rheological and Morphological Study of the Compatibility of Thermoplastic Polyurethane/ethylene–octene Copolymer Blends

Effect of Compatibilizer on the Structure and Property of Polycarbonate/polypropylene Alloys

Effect of Compatibilizer Content on the Tensile Properties and Fracture Toughness of High Density Polyethylene/Polystyrene Blends

In Situ Compatibilization of Isotactic Polypropylene and High-Density Polyethylene by a Melt Cobranching Reaction

Effects of Composition on Microstructure and Crystallization Behavior for Impact Polypropylene Copolymer Investigated by Restructuring the Complex Core-Shell Dispersed Particles in Ternary Blends

A Dynamic Mechanical Analysis on the Compatibilization Effect of Two Different Polymer Waste-Based Compatibilizers in the Fifty/Fifty Polypropylene/Polyamide 6 Blend

Significant Toughness Improvement in Ipp/plla/egma Blend by Introducing Dicumyl Peroxide As the Morphology Governor