Abstract:Low sulfur capacity and low regeneration performance are the long-time problems in the industrial application of ZnO-based adsorbents for ambient H2S removal. However, no efficient approach has been reported up to now to simultaneously solve these two problems. With the increasingly stringent environmental regulations in China, a robust but sustainable ZnO-based adsorbent is strongly desired. Herein, we constructed such an adsorbent for the first time by introducing cobalt species into ZnO/SiO2 to form a heterostructured ZnO-Co3O4/SiO2 nanocomposite. For comparison, Co doped ZnO/SiO2 and Zn doped Co3O4/SiO2 were also fabricated. According to the breakthrough tests with initial H2S partial pressure of 57 Pa, the heterostructured ZnO-Co3O4/SiO2 adsorbent exhibited highest sulfur capacity of 188.4 mg S/g sorbent at breakthrough level of 1%, the corresponded partition coefficient (at 0.57 Pa, 303 K) was 10.3 mol. kg(-1). Pa-1. The introduced Co species not only improved the dispersion of ZnO nanograins, but also served as active sites for reacting and oxidizing H2S molecular. It also found that the formed ZnO-Co3O4 heterostructure could boost the hydroxylation of H2O, which provided an alkali environment for H2S dissociation. More meaningfully, this exhausted sorbent could be secondarily utilized as catalyst for carbonyl sulfide (COS) hydrogenation and exhibited 100% COS conversion even at a temperature lower than 200 degrees C, which was almost 3.3 times the conversion achieved by a commercial Co-Mo/Al2O3 catalyst (30%). This study will provide a new idea for rational design of metal oxide-based adsorbents to avoid causing secondary pollution by the spend adsorbents.

Regenerable CuO-Based Adsorbents for Low Temperature Desulfurization Application

Study of low temperature H2S removal on Ce-Cu-Al-O mixed metal oxide adsorbents

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Adsorption Mechanism and Regeneration Performance of Calcined Zeolites for Hydrogen Sulfide and Its Application

Synthesis of ZnO-CuO and ZnO-Co3O4 Materials with Three-Dimensionally Ordered Macroporous Structure and Its H2S Removal Performance at Low-Temperature

Removal of Hydrogen Sulfide by Hydroxyl-Ferric Oxide in a Slurry Reactor at Low Temperature

New Cuprous Adsorbent Prepared by a Bioreduction Method for SO2 Removal at Low Temperature

Deep Removal of Ultra-Dilute H2S for H2 Purification Using CuCo Layered Double Hydroxide Adsorbent

Low-temperature H2S Removal from Gas Streams with SBA-15 Supported ZnO Nanoparticles

Cu-MOF-derived Cu Nanoparticles Decorated Porous N-doped Biochar for Low-Temperature H2S Desulfurization

Desulfurization Process and Kinetics of Fe/Activated Carbon Removal of H2S at Low Temperature

Elution of Hg-containing Substances from CeO2-MnO2/TiO2 Adsorbent in H2S Atmosphere by CuCl2 Solution

A Sustainable Design of ZnO-based Adsorbent for Robust H2S Uptake and Secondary Utilization As Hydrogenation Catalyst

Activated Carbon and Attapulgite As Adsorbent Composite Carrier for Removing H2S at Low Temperature

Continuous and Controllable Synthesis of Mno2 Adsorbents for H2s Removal at Low Temperature

Enhanced H2S Removal Efficiency Using CuO/Al2O3 Catalyst Impregnated with Ca(NO3)2: Influence of Calcination Temperature and Mechanistic Insights

Promoted adsorption performance for sulfide over CuO loaded hydrotalcite

Ca-Cu/Al2O3 Catalysts for H2S Removal at Near Ambient Temperature: Synthesis, Characterization, DFT Calculation, and Mechanistic Insights

Ammonia-induced CuO/13X for H2S removal from simulated blast furnace gas at low temperature

Cu Nanoparticles Inlaid Mesoporous Carbon Aerogels as a High Performance Desulfurizer.

Cu Incorporating into OMS-2 Lattice Creates an Efficient Hg0 Removal Sorbent in Natural Gas with Ambient-Temperature H2S/H2O Tolerance