Abstract:Abstract In traditional production environments, clay expansion in the near wellbore area may hinder drilling and completion operations. However, most of the above stabilizers cannot meet the actual requirement because the general clay stabilizer cannot migrate through small voids, and can also cause damage to the environment and be very expensive. Herein the behavior of nanoparticles in stabilizing clay particles and the condition for reducing the clay swelling and reservoir damage are investigated. The adsorption characteristics of nanoparticles on the core surface were studied by adsorption experiments and SEM. Displacement experiments of cores was conducted to discuss the migration behavior of nanoparticle inhibitors. In addition, the Malvern Zetasizer light reflectometer was employed to measure the electrokinetic potential of nanoparticles. To obtain a nanoparticle dispersion system, the dynamic dispersion measurement information of nanoparticle size distribution was collected. In the stability, by controlling the temperature, pH, pressure and other factors, the effects of these factors on the stability of the clay are investigated to obtain the mechanism of action of the nanoparticles. The core piece was immersed in 1g/L nano-liquid. After adsorption for a period of time, it was observed by SEM that the hydrophobic nanoparticles could form an adsorption layer on the core surface and show a strong hydrophobicity. The nano-electromotive potential is stable at +38.2mV and −36.0mV, indicating that the dispersion is very stable. The dynamic dispersion measurement surface size of nanoparticle dispersion is much smaller than the typical pore and pore channel size in most reservoirs. The microparticles are dispersed and injected through a filter device with a pore size of 200 nm and all of them are dispersed through the core. There is no residue in the filter device, thereby achieving effective migration in the core. It can be concluded that the adsorption effect is stronger under alkaline conditions when the adsorption amount is only reduced by 10% at 950 °C. This is not affected by the pressure factor and also the adsorption effect is stable. The action of mechanism between nano-silicone material and clay is obtained, and different factors are investigated to find out the prospect of nanoparticles in improving clay stability and reducing the reservoir damage.

Novel Retention System Based on (2,3-Epoxypropyl)trimethylammonium Chloride Modified Silica Nanoparticles and Anionic Polymer

Fumed Silica/polymer Hybrid Nanoparticles Prepared by Redox-Initiated Graft Polymerization in Emulsions

Adsorption of cationic-anionic surfactant mixtures on silica gel/water and silica gel/mineralized water interfaces

Silica Functionalized Almond Gum Derivatives for Integrated Flocculation Cycles for Natural and Synthetic Water Systems

Effect of Electrolytes on Interactions Between a Novel Organic-Inorganic Hybrid Polymer Flocculant and Kaolinite Particles

A novel hydrophobically-modified polyelectrolyte for enhanced dewatering of clay suspension

Synthesis of a new flocculant based on poly(acrylamide-co-(N-octyl-4-vinylpyridinium bromide)) [AM5/VP5C8Br]-application for the turbidity removal from clay suspension

Adsorption and Interaction Mechanisms of Chi-g-P(AM-DMDAAC) Assisted Settling of Kaolinite in a Two-Step Flocculation Process.

Study on flocculation performance and mechanism of cationic polyacrylamide on montmorillonite: Insights from experiments and molecular simulations

Flocculation and dewatering of the Kaolin slurry treated by single- and dual-polymer flocculants

Synergetic adsorption of polymers on montmorillonite: Insights from molecular dynamics simulations

Novel surface modification of nanosilica for low stress underfill

Preparation of a novel zwitterion flocculant with the characteristics of quaternary ammonium salt cation and dithiocarbamate anion and its application in produced water treatment

Evaluation of the Flocculation Performance of Carboxymethyl Chitosan-Graft-polyacrylamide, a Novel Amphoteric Chemically Bonded Composite Flocculant

Stimuli-Responsive Hybrid Polymer for Enhanced Solid-Liquid Separation of Industrial Effluents

Modification of Nanosilica Particles with Hydrophobic Modifier Bis[3-(Triethoxysilyl)propyl]tetrasulfide by Using Micro-Injection in Aqueous Solutions

An amphiphilic flocculant with a lignin core for efficient separation of suspended solids

Unraveling the Complexities of Silica Nanoparticle Adsorption onto Polymer Latexes in Pickering Emulsion Polymerization

Evaluation of a Novel Chitosan-Based Flocculant with High Flocculation Performance, Low Toxicity and Good Floc Properties

The Influence of Nano-Silicon Material on Clay Swelling Effect

Fluorinated Nanosilica Size Effect on Hierarchical Structure and Superhydrophobic Properties of the Epoxy Nanocomposite Film