Abstract:In this study, a lead-free ceramic system comprising (0.94 - x)Bi0.5Na0.5TiO3-0.06BaTiO3-xBi(Zn0.5Ti0.5)O3 (BNT-BT-BZT) was designed and prepared by a conventional solid-state reaction method. The effect of the addition of BZT on the phase transition characteristics and associated electromechanical properties of BNT-BT was systematically discussed and a schematic phase diagram was established. The addition of BZT had a strong impact on the phase transition as well as the strain and piezoelectric activity. The phase coexistence, which involves ferroelectric rhombohedral-relaxor pseudocubic phases, can be driven by modification with BZT and increases in temperature and can be confirmed by XRD measurements, analysis of Raman spectra and temperature-dependent changes in polarization and strain hysteresis loops. Accompanied by a shift in the ferroelectric-to-relaxor temperature TF-R to below room temperature on the addition of BZT, a compositionally induced ferroelectric-to-relaxor phase transition occurred, which gave rise to a large strain of 0.33% with a normalized strain Smax/Emax of 550 pm V(-1) at the critical BZT content x of 0.0275. The results were closely correlated with the composition and dependence on temperature of the phase transition, which significantly influenced the electromechanical properties, and the origin of the large strain observed in the present system was also addressed in detail. As a result, the design principles provided in this study open the possibility of obtaining BNT-based lead-free ceramics with enhanced electromechanical properties for actuator applications.

Ferroelectric Hysteresis Loop Scaling and Electric‐field‐induced Strain of Bi0.5Na0.5TiO3–BaTiO3 Ceramics

Temperature-insensitive large strain response with a low hysteresis behavior in BNT-based ceramics

Structure Evolution and Large Strain Response in BNT–BT Lead-Free Piezoceramics Modified with Bi(Ni0.5Ti0.5)O3

Tuning the Ferroelectric-Relaxor Transition Temperature in NBT-based Lead-Free Ceramics by Bi Nonstoichiometry

Composition- and Temperature-Driven Phase Transition Characteristics and Associated Electromechanical Properties in Bi0.5Na0.5TiO3-based Lead-Free Ceramics.

Influence of Structural Evolution on Electrocaloric Effect in Bi0.5Na0.5TiO3-SrTiO3 Ferroelectric Ceramics

Giant strain response and structure evolution in (Bi 0.5 Na 0.5 ) 0.945−x (Bi 0.2 Sr 0.7 □ 0.1 ) x Ba 0.055 TiO 3 ceramics

Scaling Behavior for (bi0.5na0.5)tio3 Based Lead-Free Relaxor Ferroelectric Ceramics

Unusual Dynamic Polarization Response and Scaling Behaviors in Bi1/2Na1/2TiO3 Ceramics

Phase Diagram and Electrostrictive Effect in BNT-based Ceramics

Electromechanical Properties and Structure Evolution in BiAlO3-modified Bi0.5Na0.5TiO3–BaTiO3 Lead-Free Piezoceramics

Relaxor Phase Evolution and Temperature-Insensitive Large Strain in B-site Complex Ions Modified NBT-based Lead-Free Ceramics

Large Electric Field-Induced Strain and Antiferroelectric Behavior in (1-<i>x</i>)(Na<sub>0.5</sub>Bi<sub>0.5</sub>)TiO<sub>3</sub>-<i>x</i>BaTiO<sub>3</sub> Ceramics

Large electric field-induced strain and antiferroelectric behavior in (1-x)(Na0.5Bi0.5)TiO3-x BaTiO3 ceramics

Temperature-Dependent Electrical Properties of 0.94Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-0.06BaTiO<sub>3</sub>Ceramics

Gaint Electric Field-Induced Strain and Ferroelectric Behavior of Bi0.5Na0.4K0.1TiO3-Na1- Xlixnbo3 Lead-Free Ceramics

Temperature-Dependent Electrical Properties Of 0.94bi(0.5)Na(0.5)Tio(3)-0.06batio(3) Ceramics

Comparative study on (Na 0.47 Bi 0.47 Ba 0.06 ) 0.95 A 0.05 TiO 3 (A = Sr 2+ /Ca 2+ ) lead-free ceramics: Scaling behavior of ferroelectric hysteresis loop

Electrostrictive and Relaxor Ferroelectric Behavior in Bialo3-Modified Batio3 Lead-Free Ceramics

Strain Performance and Thickness-Induced Asymmetry in SrTiO3 Doped BNT-based Lead-Free Ferroelectrics from Nonergodic to Ergodic Phase

Strain performance and thickness-induced asymmetry in SrTiO 3 doped BNT-based lead-free ferroelectrics from nonergodic to ergodic phase