Abstract:Based on the physical phenomenon that some propagating waves are partially reflected by discontinuities in waveguide structures, this paper proposes a novel discontinuity locating method which is potentially able to detect both the added and embedded discontinuities, such as supports and cracks. In this method, the reflection coefficients of a discontinuity can be obtained experimentally by using a generalized discontinuity approach without the information of the discontinuity position. On the other hand, these reflection coefficients can be derived from a reflection-coefficient prediction model in terms of the discontinuity position. By minimizing the error between the reflection coefficients from measurements and those from the prediction model, in the frequency bands in which the guided waves are sensitive to the discontinuity and can propagate with low decay rate, the discontinuity position parameter in the prediction model can then be identified. Two numerical cases of locating an added discontinuity and an embedded discontinuity on a beam are proposed to introduce the effectiveness of the method. Simulation results show that these two discontinuities can be located accurately with zero error. In practice, the accuracy of discontinuity locating may be influenced by some factors: (1) boundary conditions of the beam, (2) sizes and locations of the discontinuity, and (3) measurement noise. The investigation of these factors in simulation shows that this locating method is insensitive to the boundary conditions of the beam, effective to small size of the discontinuity, and robust to the measurement noise. Finally, three experiments were developed to locate an added discontinuity on a finite beam, a crack in an infinite beam with depth ratio of 1/2, and a crack in an infinite beam with depth ratio of 1/6, respectively. The corresponding locating errors of these three experiments are 0 percent, 0.077 percet and 0.154 percent.

High-order Dynamic Modeling and Parameter Identification of Structural Discontinuities in Timoshenko Beams by Using Reflection Coefficients

High-order dynamic modeling and parameter identification of structural discontinuities in waveguides

Discontinuity Location on A Timoshenko Beam by Using A Novel Wave Reflection Technique

On the Transverse Vibration of Timoshenko Double-Beam Systems Coupled with Various Discontinuities

Vibration Analysis of Non-Uniform Timoshenko Beams Coupled with Flexible Attachments and Multiple Discontinuities

Spectral Element Modelling of Wave Propagation with Boundary and Structural Discontinuity Reflections

Vibration of beams with arbitrary discontinuities and boundary conditions

A Comprehensive Dissimilarity Method of Modeling Accuracy Evaluation for Discontinuity Disc Models Based on the Sampling Window

Vibrations of Multi-span Non-uniform Beams with Arbitrary Discontinuities and Complicated Boundary Conditions

Theoretical and Experimental Identification of Clearance Nonlinearities for A Continuum Structure

Parameters Identification for Joint Surfaces of Cantilever Beam

Wave analysis in one dimensional structures with a wavelet finite element model and precise integration method

Experimental investigation and theoretical modelling on nonlinear dynamics of cantilevered microbeams

Modal Identification of Multi-Degree-of-freedom Structures Based on Intrinsic Chirp Component Decomposition Method

Identification of Instantaneous Frequency and Damping From Transient Decay Data

Quantitative Structural Damage Detection Using High-Frequency Piezoelectric Signatures Via The Reverberation Matrix Method

A multiscale finite element method with embedded strong discontinuity model for the simulation of cohesive cracks in solids

A Hybrid Analytical And Finite Element Method For Mid-Frequency Vibration Analysis Of Plate Structures With Discontinuities

Dynamic modeling and analysis of discontinuous wave propagation in a rod

Time-Domain Spectral Finite Element Method for Modeling Second Harmonic Generation of Guided Waves Induced by Material, Geometric and Contact Nonlinearities in Beams

An electromechanical impedance approach for quantitative damage detection in Timoshenko beams with piezoelectric patches