Abstract:At present, researchers in the field of pipeline inspection focus on pipe wall defects while neglecting pipeline defects in special situations such as welds. This poses a threat to the safe operation of projects. In this paper, a multi-node fusion and modal projection algorithm of steel pipes based on guided wave technology is proposed. Through an ANSYS numerical simulation, research is conducted to achieve the identification, localization, and quantification of axial cracks on the surface of straight pipelines and internal cracks in circumferential welds. The propagation characteristics and vibration law of ultrasonic guided waves are theoretically solved by the semi-analytical finite element method in the pipeline. The model section is discretized in one-dimensional polar coordinates to obtain the dispersion curve of the steel pipe. The T(0,1) mode, which is modulated by the Hanning window, is selected to simulate the axial crack of the pipeline and the L(0,2) mode to simulate the crack in the weld, and the correctness of the dispersion curve is verified. The results show that the T(0,1) and L(0,2) modes are successfully excited, and they are sensitive to axial and circumferential cracks. The time–frequency diagram of wavelet transform and the time domain diagram of the crack signal of Hilbert transform are used to identify the echo signal. The first wave packet peak point and group velocity are used to locate the crack. The pure signal of the crack is extracted from the simulation data, and the variation law between the reflection coefficient and the circumferential and radial dimensions of the defect is calculated to evaluate the size of the defect. This provides a new and feasible method for steel pipe defect detection.

Experimental and Numerical Studies of the Oblique Defects in the Pipes Using a Chaotic Oscillator Based on Ultrasonic Guided Waves

Scattering of Torsional Flexural Guided Waves from Circular Holes and Crack-Like Defects in Hollow Cylinders

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

Implementing Ultrasonic Guided Wave Mode Control in Hollow Cylinders

Study on the effect of corrosion defects on VIV behavior of marine pipe using a new defective pipe element

Study on simulation of non-destructive testing for pipeline defects by ultrasonic guided waves

Theoretical and Experimental Studies of Longitudinal Guided Wave Generation in Hollow Cylinders by Multielement Transducers

Experimental Investigation of Deformation Damage Detection in Pipes Using Ultrasonic Guided Waves

Numerical Simulation of Pipeline Defect Detection Based on Piezoelectric Ultrasonic Guided Wave

Defects Detection in Typical Positions of Bend Pipes Using Low-Frequency Ultrasonic Guided Wave

Location Detection and Numerical Simulation of Guided Wave Defects in Steel Pipes

Numerical Investigation of Application of Unidirectional Generation to Improve Signal Interpretation of Circumferential Guided Waves in Pipes for Defect Detection

Numerical simulation on the interaction of longitudinal guided waves with double defects in pipes

Non-destructive Evaluation of Spiral-welded Pipes Using Flexural Guided Waves

Electromagnetic Acoustic Detection of Pipe Defects Hidden above T-Type Support Structures with Circumferential Shear Horizontal Guided Wave

Numerical Study of Length and Angle Gauging for Subsurface-Inclined Cracks Based on Reflected Surface Waves with Laser Ultrasonic Technique

Numerical Investigation of Unidirectional Generation of Circumferential SH Waves Applied to Defect Detection in Pipe

Evaluation of Cross-Sectional Deformation in Pipes Using Reflection of Fundamental Guided-Waves

Flow-induced Buckling Statics and Dynamics of Imperfect Pipes

Evaluation of Notches in Pipes through the Use of Guided Wave and the Reflection Coefficient Method

The Reflection of Guided Waves from Simple Dents in Pipes.