Abstract:A lattice temperature model is derived for oxide-confined vertical cavity surface emitting lasers (VCSELs) based on carrier transport and the conservation of energy. Peltier heat is caused by the bandedge and quasi-Fermi level discontinuities at a heterojunction. However, considering the device size, Peltier heat needs to be distributed and is not just generated at the interface, otherwise, an anomolous spike in temperature will occur. We have developed a novel treatment to model the Peltier heat at a heterojunction by use of a Monte Carlo simulation. Peltier heat is found to be a major heat contributor, and it results in a rapid and high temperature rise in the separate confinement heterostructure (SCH) region of the laser diode. We have also shown that the carrier thermal conductivities for materials with high mobilities must be included at high carrier densities because they contribute to additional spreading of the thermal energy. Subsequently, this lattice temperature model is coupled self-consistently to electronic and optical solvers to form a complete simulator for VCSELs. Self-heating causes a fast temperature rise when the VCSEL is operated under continuous wave conditions, causing resonant wavelength changes and an eventual thermal rollover. The resonant wavelength shift has been shown to be caused mainly by the heating of the distributed Bragg reflectors even though the peak temperature occurs within the SCH region. Possible physical factors causing the thermal rollover have also been examined with our complete simulator. The Auger recombination process is found to be one of the main factors causing the thermal rollover in 980 nm oxide-confined VCSELs while the photon lifetime is a factor in determining the position of the thermal rollover. We have also achieved a very good match between our simulated results and experimental data.

Modeling Heat Generation in High Power Density Nanometer Scale Gaas/Ingaas/Algaas Phemt

Equivalent method of GaAs PHEMT MMIC for thermal simulation

Heat generation and transfer mechanism in micro/nano-scale high-power electronic devices

Thermal modeling, analysis, and management of high-power GaN transistors

Investigation on Thermo-Mechanical Responses in High Power Multi-Finger AlGaN/GaN HEMTs

A Compact Gate-Width Scalable Model for Dual-Gate GaAs Phemt

Numerical investigation on thermal characteristics of GaN HFETs for high power applications

Field-induced Hot-Electron Emission Model for Wide-Band-gap Semiconductor Nanostructures

Lattice Temperature Model and Temperature Effects in Oxide-Confined VCSEL’s

Electron Heat Source Driven Heat Transport in GaN at Nanoscale: Electron–Phonon Monte Carlo Simulations and a Two Temperature Model

Hybrid Monte Carlo-Diffusion Studies of Modeling Self-Heating in Ballistic-Diffusive Regime for Gallium Nitride HEMTs

A Scalable Multiharmonic Surface-Potential Model of AlGaN/GaN HEMTs

Multiphysics Simulation of Self-Heating-Induced Thermal Stress Effects on Quantum Transport in Gate-All-Around Nanosheet Field Effect Transistors

Models for the self-heating evaluation of a gallium nitride-based high electron mobility transistor

Study of Self-Heating and High-Power Microwave Effects for Enhancement-Mode p-Gate GaN HEMT

Non-linear thermal resistance model for the simulation of high power GaN-based devices

An ASM-Based Semiempirical Model for AlGaN/GaN Power HEMTs with P-Gan Gate

Mechanism of AlGaAs/InGaAs pHEMT Nonlinear Response Under High-Power Microwave Radiation

Density-Dependent Electron Transport and Precise Modeling of GaN HEMTs

Heat Generation Mechanisms of Self-Heating Effects in Soi-Mos

Two-Dimensional Static Numerical Modeling and Simulation of AlGaN/GaN HEMT