Abstract:Electrical discharge phenomena in EDM occur in a very short time period and in a very narrow space, thus making both observation and theoretical analysis extremely difficult. For this reason, the material removal mechanism in EDM has yet to be understood clearly. In this paper, the forming process of discharge craters in three dimensions was simulated, and material removal mechanism in EDM was analyzed using Molecular Dynamics (MD). It was found that material removal mechanism in EDM can be explained in two ways; one by vaporization and the other by the bubble explosion of superheated metals. It was also found that the metal removal efficiency is 0.02–0.05, leaving most of the melted pool resolidified. In addition, the influence of power density on the removal process was investigated, and the results showed that as the power density increases, the diameter and depth of the melted area increase, as does the metal removal efficiency. In this study, the forming mechanism of the bulge around discharge craters was also analyzed, and it was found that bulge is formed due to two mechanisms. The first is the shearing flow of the molten material caused by the extremely high pressure in the superheated material, and the second is the accumulation of the ejected material on the bulge formed by the first forming mechanism. It was also found that existence of micro pores in the workpiece material increases the depth of the discharge crater and melted area, thereby increasing the machining surface roughness. Simulation of the distribution of removed materials in the gap showed that some part of the removed material becomes debris ejected from the gap, while another part settles on the surface of the opposite electrode, and the last part returns to the surface of the electrode from which it was ejected.

A Novel Method of Determining Energy Distribution and Plasma Diameter of Edm

A New Method of Investigation the Characteristic of the Heat Flux of EDM Plasma

Study on Energy Distribution of Discharge Plasma and Its Effect on Crater Formation in EDM

Discharge Crater Formation Simulation Coupled by Thermo-Fluid Analysis of Arc Plasma in EDM

A Thermo-Hydraulic Modeling For The Formation Process Of The Discharge Crater In Edm

A New Thermal Model Considering Tie of the Expanding Spark for Anode Erosion Process of Edm in Water

Analysis of Arc Plasma Characteristics and Energy Distribution in EDM Based on Two-Temperature Model

Determining the Energy Distribution During Electric Discharge Machining of Ti–6Al–4V

Study on Effects of Electrode Material and Dielectric Medium on Arc Plasma in Electrical Discharge Machining

Thermal Modeling Of The Material Removal Rate For High-Speed Small Hole Edm Drilling Using The Computational Fluid Dynamics Method

Study Of The Gaussian Distribution Of Heat Flux For Micro-Edm

Numerical Simulation of Cathode Erosion in EDM Process

The Role of Discharge Plasma on Molten Pool Dynamics in EDM

Study of the effect of spark radius model upon the performance characteristics in EDM process

3D Fractal Model with Experimental Analysis for Assessing Surface Topography in EDM

Analysis and simulation of micro electro discharge machining process

Novel methods for high-speed observation of material removal and molten pool movement in EDM

Molecular dynamics simulation of the material removal mechanism in micro-EDM

Characterization of Plasma Discharge Channel in EDM Using Photography and Spectroscopy

Influence of Electrode Shape and Size on Electric Arc Channel and Crater

Micro EDM Deposition in Air by Single Discharge Thermo Simulation