Abstract:Advances in Structural Engineering, Ahead of Print. Varying temperature may cause a non-uniform temperature distribution of a bridge and lead to excessive movement and stresses of the structure. Traditional thermal analyses of bridges adopt a divide-and-conquer approach, which conducts a simplified 2D or local 3D heat-transfer analysis and then a global 3D structural analysis by inputting the calculated temperature into another bridge model. This process requires considerable manual intervention and is inefficient and may lead to inaccurate results. This study develops a unified approach of heat-transfer and structural analyses for the first time to calculate the temperature distribution and the associated responses of an entire structure by integrating the field monitoring data. The arch footbridge at the Hong Kong Polytechnic University is used as a testbed, and a detailed finite element model (FEM) of the bridge is established. The measured air temperature and solar radiation are used as the thermal boundary conditions. The hemisphere technique is adopted to calculate the view factor between different surfaces of the bridge, which are then used to obtain the solar radiation on all external surfaces in different instants on different dates. The 3D global hear-transfer analysis is conducted to obtain the temperature distribution of the entire bridge. The calculated temperature data of the bridge are then automatically input into the same FEM of the bridge to calculate the temperature-induced bridge responses via the structural analysis. The heat-transfer analysis and structural analysis share the same FEM while using different element types. Therefore, the manual intervention is avoided. The calculated and monitored temperature data and responses show a good agreement. The developed new unified approach enables an automatic and efficient analysis of thermal behaviors of bridges. This approach can be extended to other types of bridges.

Field monitoring study of an integral abutment bridge supported by prestressed precast concrete piles on soft soils

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Monitor and Analyse on Temperature and Stress within Mass Concrete of Bridge Pier's Bearing Platform in Shanghai Changjiang Tunnel-Bridge Project

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Continuous Box-Girder Bridge Condition Assessment Based on Structural Health Monitoring System: A Case Study

Field Measurement Analysis of the Influence of Double Shield Tunnel Construction on Reinforced Bridge

Dynamic Response of Bridge Approach Treated with Deep-Seated Concrete Slab

A temperature-driven approach for quantitative assessment of strengthening effect of continuous bridges using structural health monitoring data

Laboratory study of the behavior of granular soils behind integral bridge abutments

Construction, maintenance and utilization of field exposure station at Hangzhou Bay Bridge

Investigation on the Influence of Active Underpinning Process on Bridge Substructures During Shield Tunnelling: Numerical Simulation and Field Monitoring

Temperature Effects on Strains of A Continuous Box-Girder Bridge with A Long-Term Monitoring System

Predicting the Earth Pressure on Integral Bridge Abutments

BASELINE STUDY FOR BRIDGE HEALTH MONITORING

Research Of Full-Life Monitoring For Long Span-Bridge

Temperature behaviors of an arch bridge through integration of field monitoring and unified numerical simulation

Numerical Analysis of the Embedded Abutments of Integral Bridges

Continuous Dynamic Monitoring of a Prestressed Concrete Bridge Based on Strain, Inclination and Crack Measurements over a 14-Year Span

Long Term Health Monitoring of Post-Tensioning Box Girder Bridges

Structural Health Monitoring Design and Performance Evaluation of a Middle-Span Bridge