Abstract:The prevailing open-structure intravascular photoacoustic (IVPA) endoscope emits a gradually deformed laser beam with exposed optical or acoustical components bearing pollution and damage in arterial lumen. Deformed laser beam scanning, which causes a low excitation efficiency and serious deterioration of the transverse resolution, is a current big obstacle to the application of photoacoustic endoscopy in intravascular imaging. Hence, the stable and reliable IVPA endoscope is indispensable. In this letter, we designed a high-robustness intravascular photoacoustic (HR-IVPA) endoscope with a hermetically sealed opto-sono capsule. The distal end of the opto-sono capsule was integrated with miniaturized optics, including a customized C-Lens and a customized total-reflection prism (TRP). The TRP was first applied to a side-viewing IVPA endoscope, featuring a high-throughput energy coupling efficiency of 90% and a cut-off free damage threshold. The optical path structure of the endoscope, optimized using optical simulation tools, overcame the ambiguous focus shift caused by chromatic dispersion and achieved a waist size of 20 µm as well as a focus depth of 4 mm in water at the wavelength of 1200 nm. The mass phantom experiments demonstrated that the HR-IVPA endoscope afforded repeatable IVPA images with a relatively constant signal-to-noise ratio (SNR) of about ∼41.8 dB and a transverse resolution of about ∼23 µm. The imaging experiments of the stent and lipid further demonstrated the robustness and validated the imaging ability of the HR-IVPA endoscope, which opens a new avenue for improving the endoscopic imaging capability, strengthening the credible detection of atherosclerotic cardiovascular disease.

Design and Fabrication of an Integrated Intravascular Ultrasound/photoacoustic Scan Head

Integrated Intravascular Ultrasound and Photoacoustic Imaging Scan Head.

All-Optical Generation And Detection Of Acoustic Waves For Intravascular Ultrasound And Photoacoustic Imaging

All-optical Scanhead for Ultrasound and Photoacoustic Dual-Modality Imaging.

All-optical scanhead for ultrasound and photoacoustic imaging-Imaging mode switching by dichroic filtering.

Integrated Intravascular Ultrasound and Optical-Resolution Photoacoustic Microscopy with A 1-Mm-diameter Catheter

Integrated Ultrasound And Photoacoustic Probe For Co-Registered Intravascular Imaging

Intravascular Confocal Photoacoustic Endoscope with Dual-Element Ultrasonic Transducer.

Miniature Intravascular Photoacoustic Endoscopy with Coaxial Excitation and Detection.

Development of A Combined Ultrasound and Photoacoustic Endoscopic Probe

Acoustic stack for combined intravascular ultrasound and photoacoustic imaging

Integrating a Fundus Camera with High-Frequency Ultrasound for Precise Ocular Lesion Assessment

All-Optical Transducer For Ultrasound And Photoacoustic Imaging By Dichroic Filtering

Integrative Prototype B-scan Photoacoustic Tomography System Based on a Novel Hybridized Scanning Head

A 2.8-mm-diameter scanhead for multispectral photoacoustic microscopy and optical coherence tomography

High-Speed Intravascular Spectroscopic Photoacoustic Imaging at 1000 A-Lines Per Second with A 0.9-Mm Diameter Catheter

Intravascular Optical-Resolution Photoacoustic Tomography with a 1.1 Mm Diameter Catheter.

Combined intravascular photoacoustic and ultrasound imaging imaging of atherosclerotic calcification in human artery

Towards the development of intravascular photoacoustic/ultrasound/OCT tri-modality imaging technology with a 0.9-mm diameter catheter

A 2-D Ultrasound Transducer with Front-End ASIC and Low Cable Count for 3-D Forward-Looking Intravascular Imaging: Performance and Characterization

High-robustness Intravascular Photoacoustic Endoscope with a Hermetically Sealed Opto-Sono Capsule.