Abstract:High-spectral-resolution lidar (HSRL) is a powerful tool for aerosol measurements. With/without laser seeding technique in the transmitted laser, the HSRL can be distinguished as the single-longitudinal-mode (SLM) HSRL or the multi-longitudinal-mode (MLM) HSRL, and the Mach-Zehnder interferometer (MZI) with periodic transmittance function can be used as the spectral discriminator in both the SLM HSRL and MLM HSRL. To in-depth knowledge of the respective advantages of the SLM HSRL and MLM HSRL for measuring aerosol optical properties, the working principle, optimal parameter setting, and detection performance of the SLM HSRL and MLM HSRL are analyzed and discussed in detail, respectively. The working principle of the SLM HSRL and MLM HSRL indicate that the effective transmittance of MZI is the important parameter of data retrieval, the main source of retrieval uncertainties, and the key factor of MZI optical path difference (OPD) settings. To ensure that the MZI can achieve the preferable separation for aerosol Mie scattering signals and molecular Rayleigh scattering signals, the optimal OPDs of MZI are set at 165 mm and 1000 mm in the SLM HSRL and MLM HSRL from the aspects of the effective transmittance of MZI and the spectral discrimination ratio (SDR). Besides, to analyze the influence of frequency difference and divergence angle for the detection performance of HSRL, the effective transmittance of MZI and SDR are simulated and the results show that the MLM HSRL has higher requirements for the environmental parameters and the echo beam collimation than the SLM HSRL. Moreover, the HSRLs with SLM and MLM transmitted lasers are constructed in Xi'an for measuring aerosol optical properties. The preliminary measurement results show that the range square corrected signal (RSCS) of Rayleigh channel is smaller than that of Mie channel in both the SLM HSRL and MLM HSRL, while the difference between RSCS of Rayleigh channel and RSCS of Mie channel in the SLM HSRL is larger than that in the MLM HSRL, and the detection range of the SLM HSRL is lower than that of the MLM HSRL.

Study of the Scanning Lidar on the Atmospheric Detection

Generalized High-Spectral-resolution Lidar Technique with a Multimode Laser for Aerosol Remote Sensing.

Retrieval and Analysis of a Polarized High-Spectral-resolution Lidar for Profiling Aerosol Optical Properties

Detection of Atmospheric Boundary Layer Height in the Plum Rain Season over Hangzhou Area with Three-Dimensional Scanning Polarized Lidar

Polarized High-Spectral-Resolution Lidar Based on Field-Widened Michelson Interferometer

Multi-Longitudinal-Mode High-Spectral-Resolution Lidar

A Semianalytic Monte Carlo Radiative Transfer Model for Polarized Oceanic Lidar: Experiment-based Comparisons and Multiple Scattering Effects Analyses

Feasibility Studies of the Three-Wavelength Mie-Scattering Polarization Scheimpflug Lidar Technique

Development of the Zju Polarized Near-Infrared High Spectral Resolution Lidar

Pattern Recognition Model for Aerosol Classification with Atmospheric Backscatter Lidars: Principles and Simulations

A Semianalytic Monte Carlo Simulator for Spaceborne Oceanic Lidar: Framework and Preliminary Results

Observations of Atmospheric Aerosol and Cloud Using a Polarized Micropulse Lidar in Xi’an, China

Effects of Systematic Polarization Errors on the Retrieval of High-Spectral-resolution Lidar

Development and observation of a three-dimensional scanning coaxial Mie lidar for dynamic monitoring of near-surface aerosol plumes

High-resolution wide range dual-channel scheimpflug lidar for aerosols detection

Profiling Aerosol Liquid Water Content Using a Polarization Lidar.

Polarized Light Scattering of Particulate Matter in Detection of Oceanographic Profiling LiDAR

Performance analysis of high-spectral-resolution lidar with/without laser seeding technique for measuring aerosol optical properties

Potential of Polarization Lidar to Profile the Urban Aerosol Phase State during Haze Episodes

Laser beam imaging technique for atmospheric detection

The application of measuring atmospheric properties in overlap factor region using scanning Lidar