Abstract:The present research examined the effects of inclusions and microstructure on the initial marine corrosion and evolution of corrosion products in weathering steels by using first-principle modeling and various highly-sensitive analytical techniques including in-situ scanning vibrating electrode technique (SVET), scanning electron microscope/energy-dispersive X-ray spectroscopy (SEM/EDS), x-ray diffraction (XRD), and electrochemical workstation. The results demonstrated that CaS in the (Al, Mg)Ox-CaS inclusion formed in both Q500qE and Q370qE steels preferentially dissolved and triggered the initial corrosion. The acidic environment created between the inclusions and the iron matrix further promoted the dissolution of the inclusions. Moreover, due to the discrepancy in corrosion tendency, galvanic couples generated between the bainite ferrite (BF) phase and martensite/residual austenite (M/A) island in the Q500qE steel as well as the ferrite phase and pearlite phase in the Q370qE steel, accelerating the initial corrosion. In addition, pearlite facilitates a faster spread rate of local corrosion compared to bainite. Furthermore, with prolonged exposure, Q500qE steel exhibited more uniform and dense structure of the corrosion products layer, demonstrating a higher corrosion resistance than Q370qE steel. Finally, the mechanistic model was established to illustrate the influence of inclusions and microstructure on corrosion initiation and propagation of weathering steels.

Initiation and Developmental Stages of Steel Corrosion in Wet H2s Environments

Electrochemical Behaviour of Martensitic Stainless Steel after Immersion in a H2S-saturated Solution

Corrosion Behavior and Kinetics of Early Stages of Low Alloy Steel under H2S/CO2 Environment

Corrosion Behavior of Carbon Steel with Pearlite-Ferrite Microstructure in Water-Saturated Supercritical H2S/CO2 Environment

Investigations of the Diverse Corrosion Products on Steel in a Hydrogen Sulfide Environment

Investigation of Microstructure and Corrosion Behavior of Weathering Steel in Aqueous Solution Containing Different Anions for Simulating Service Environments

Corrosion Behavior of Ferrite-Pearlite Steel Exposed to H2S/CO2 Environment

Electrochemical Behavior of Cu-Bearing Crmo Steel in H2s Saturated Aqueous Brine Solution

Unraveling the effect of H2S on the corrosion behavior of high strength sulfur-resistant steel in CO2/H2S/Cl− environments at ultra high temperature and high pressure

Role of Inclusion and Microstructure on Corrosion Initiation and Propagation of Weathering Steels in Marine Environment

The Dependence of Electrochemical Behaviors on the Corrosion Products of L360ncs Steel Exposed to Wet H2s Environments

Evaluation for Corrosion Process at Fusion Boundary of Stainless Steel Strip Overlay Joints in H2s Containing Solution

The effect of H2S concentration on the corrosion behavior of carbon steel at 90°C

Effect of Amorphous FeS Semiconductor on the Corrosion Behavior of Pipe Steel in H2S-Containing Environments

The Effect of H(2)S Concentration on the Corrosion Behavior of Carbon Steel at 90 Degrees C

Characterization of the Effect of Hydrogen Sulfide on the Corrosion of X80 Pipeline Steel in Saline Solution

The Investigation of H2S Corrosion of 16MnR Steel and the Rule of Hydrogen Permeation

Corrosion Behavior of Oil Tube Steel in Simulant Solution with Hydrogen Sulfide and Carbon Dioxide

Microstructure Characteristics and Corrosion Behavior of Low‐Alloy High‐Strength Steel Used for Armor Layer under Exposure to H2S‐Saturated Solution

Permeating Hydrogen Generated from the Elemental Sulfur Corrosion of Low Carbon Steel

Corrosion behavior of carbon steel in H 2S-HCl-H 2O at 90 °C: I -the effect of H 2S concentration on the corrosion behavior of carbon steel