Abstract:An extruded Mg-5Zn-2.5Y-1Ce-0.5Mn alloy with uniform fine alpha-Mg grains, dispersed W-phase and T-phase and weak basal texture was prepared by the semi-continuous casting and one-pass extrusion methods. The deformation behaviors of the extruded alloy were tested at a temperature range from room temperature (RT) to 350 degrees C anda strain rate range from 1 x 10-2 s1 to 4 x 10-4 s1. The results and relevant mechanisms were analyzed by using the measured data of the strain rate sensitivity (m) and the activation energy (Q) and the observations of the morphologies of deformation and fracture surfaces. It was demonstrated that the tensile strengths decrease, while the elongation to failure tends to increase with increasing temperature or decreasing strain rate. The variation in mechanical properties with increasing temperature mainly arises from a change in opening deformation mechanisms from the dislocation slip at RT to the dislocation climb at 250 degrees C to the grain boundary (GB) sliding at 350 degrees C. At RT, the slightly decreased tensile strengths and slightly increased elongation to failure with decreasing strain rate are mainly attributed to the weak sensitivity of the dislocation slip to strain rate. At 250 degrees C, the lower tensile strengths and the larger elongation to failure at 4 x 10-4 s1 than that at 1 x 10-2 s1 are mainly attributed to the occurrence of the dynamic recrystallization (DRX) at lower strain rate, while such DRX does not occur at higher strain rate. At 350 degrees C, the lower tensile strengths and the much larger elongation to failure at 4 x 10-4 s1 than that at 1 x 10-2 s1 are attributed to the GB sliding accommodated by the lattice diffusion at lower strain rate, while the GB sliding at higher strain rate is accommodated by the GB diffusion.

Deformation Behavior of an Extruded Mg–Dy–Zn Alloy with Long Period Stacking Ordered Phase

High Strain Rates Deformation Behavior of an As-Extruded Mg–2.5Zn–4Y Magnesium Alloy Containing LPSO Phase at High Temperatures

Deformation-induced Dynamic Precipitation of 14H-LPSO Structure and Its Effect on Dynamic Recrystallization in Hot-Extruded Mg-Y-Zn Alloys

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

An Elevated Temperature Mg–Dy–Zn Alloy with Long Period Stacking Ordered Phase by Extrusion

Hot Deformation Behavior of an As-Extruded Mg-2.5Zn-4Y Alloy Containing LPSO Phases

Deformation Behavior, Microstructure Evolution and Hot Workability of Mg-3.7Gd-2.9Y-0.7Zn-0.7Zr Alloy

High Temperature Compressive Deformation Behavior of an Extruded Mg–8Gd–3Y–0.5Zr (wt.%) Alloy

Influence of the morphology of long-period stacking ordered phase on the mechanical properties of as-extruded Mg-5Zn-5Y-0.6Zr magnesium alloy

Microstructures and Mechanical Properties of Mg-10Gd-3Y-2Zn-0.5Zr Alloy

The Role of Long-Period Stacking Ordered Phases in the Deformation Behavior of a Strong Textured Mg-Zn-Gd-Y-Zr Alloy Sheet Processed by Hot Extrusion

Effect of Deformation Parameters on Recrystallization Behavior and Long-Period Stacking-Ordered Phase of Mg-9Gd-4Y-2Zn-0.5Zr Alloy

Hot Deformation and Dynamic Recrystallization Behaviors of Mg-Gd-Zn Alloy with LPSO Phases

Characterization of Hot Deformation Behavior of an Extruded Mg–Zn–Mn–Y Alloy Containing LPSO Phase

The abnormal flow behavior of Mg-9Gd-4Y-2Zn-0.5Zr alloy during hot tensile deformation at high temperature and low strain rate

Microstructure and Mechanical Properties of an Extruded Mg-2Dy-0.5Zn Alloy

Study of Tensile and Compressive Behavior of ECO-Mg97Gd2Zn1 Alloys Containing Long-Period Stacking Ordered Phase with Lamellar Structure

Effects of temperature and strain rate on deformation behaviors of an extruded Mg-5Zn-2.5Y-1Ce-0.5Mn alloy

High Strain Rate Deformation Mechanism of Mg–2.5Zn–4Y Magnesium Alloy Containing LPSO Phase

Hot Compression Behavior of the Mg-Gd-Y-Zn-Zr Alloy Filled with Intragranular Long-Period Stacking Ordered Phases

The Roles of Long Period Stacking Ordered Structure and Zn Solute in the Hot Deformation Behavior of Mg-Gd-Zn Alloys