Abstract:The organic Rankine cycle (ORC) is an established thermodynamic process that converts waste heat to electric energy. Due to the wide range of organic working fluids available the fluid selection adds an additional degree-of-freedom to the early design phase of an ORC process. Despite thermodynamic aspects such as the temperature level of the heat source, other technical, economic, and safety aspects have to be considered. For the fluid selection process in this paper, 22 criteria were identified in six main categories while distinguishing between elimination (EC) and tolerance criteria (TC). For an ORC design, the suggested method follows a practical engineering approach and can be used as a structured way to limit the number of interesting working fluids before starting a detailed performance analysis of the most promising candidates. For the first time, the selection process is applied to a two-stage reference cycle, which uses the waste heat of a large reciprocating engine for cogeneration power plants. It consists of a high temperature (HT) and a low temperature (LT) cycle in which the condensation heat of the HT cycle provides the heat input of the LT cycle. After the fluid selection process, the detailed thermodynamic cycle design is carried out with a thermodynamic design tool that also includes a database for organic working fluids. The investigated ORC cycle shows a net thermal efficiency of about 17.4% in the HT cycle with toluene as the working fluid and 6.2% in LT cycle with isobutane as the working fluid. The electric efficiency of the cogeneration plant increases from 40.4% to 46.97% with the both stages of the two-stage ORC in operation.

Energy and Exergy-Based Working Fluid Selection for Organic Rankine Cycle Recovering Waste Heat from High Temperature Solid Oxide Fuel Cell and Gas Turbine Hybrid Systems

Advances in Working Fluids for Organic Rankine Cycle

Working Fluid Selection for a Small-Scale Organic Rankine Cycle Recovering Engine Waste Heat

Thermoeconomic Optimization Design of the ORC System Installed on a Light-Duty Vehicle for Waste Heat Recovery from Exhaust Heat

Energetic Based Organic Fluid Selection for a Solid Oxide Fuel Cell-Organic Rankine Cycle Combined System

Exergy Analysis and Working Fluid Selection of Organic Rankine Cycle for Low Grade Waste Heat Recovery

A Study on Working Fluid Selection for Organic Rankine Cycle of Engine Waste Heat

Systematic Fluid Selection for Organic Rankine Cycles and Performance Analysis for a Combined High and Low Temperature Cycle

Performance Analysis and Working Fluid Selection of a Supercritical Organic Rankine Cycle for Low Grade Waste Heat Recovery

Parametric Optimization and Comparative Study of Organic Rankine Cycle (ORC) for Low Grade Waste Heat Recovery

Working Fluid Selection for an Organic Rankine Cycle Utilizing High and Low Temperature Energy of an LNG Engine

Fluids and Parameters Optimization for the Organic Rankine Cycles (orcs) Used in Exhaust Heat Recovery of Internal Combustion Engine (ICE)

Comparison of Thermodynamic Performance for Waste Heat Power Generation System with Different Low Temperature Working Fluids

Comparative Study of Alternative ORC-based Combined Power Systems to Exploit High Temperature Waste Heat

Working Fluid Selection For Medium Temperature Organic Rankine Cycle

Thermal Performance Evaluation of Subcritical Organic Rankine Cycle for Waste Heat Recovery from Sinter Annular Cooler

Working fluid selection for low temperature transcritical organic Rankine cycle

Selection and Evaluation of Dry and Isentropic Organic Working Fluids Used in Organic Rankine Cycle Based on the Turning Point on Their Saturated Vapor Curves

Design and Analysis of the Combined Cycle With the Micro Gas Turbine and Organic Rankine Cycle Settings

Working Fluid Selection for Organic Rankine Cycle (orc) Considering the Characteristics of Waste Heat Sources

SELECTION OF WORKING FLUID USED IN VAPOR POWER CYCLE FOR WASTE HEAT RECOVERY OF VEHICLE ENGINE