Abstract:A novel micro/nanoscale rough structured superhydrophilic hybrid-coated mesh that shows underwater superoleophobic behavior is fabricated by spray casting or dipping nanoparticle–polymer suspensions on stainless steel mesh substrates. Water droplets can spread over the mesh completely; meanwhile, oil droplets can roll off the mesh at low tilt angles without any penetration. Besides overcoming the oil-fouling problem of many superhydrophilic coatings, this superhydrophilic and underwater superoleophobic mesh can be used to separate oil and water. The simple method used here to prepare the organic–inorganic hybrid coatings successfully produced controllable micro-nano binary roughness and also achieved a rough topography of micro-nano binary structure by controlling the content of inorganic particles. The mechanism of oil–water separation by the superhydrophilic and superoleophobic membrane is rationalized by considering capillary mechanics. Tetraethyl orathosilicate (TEOS) as a base was used to prepare the nano-SiO2 solution as a nano-dopant through a sol-gel process, while polyvinyl alcohol (PVA) was used as the film binder and glutaraldehyde as the cross-linking agent; the mixture was dip-coated on the surface of 300-mesh stainless steel mesh to form superhydrophilic and underwater superoleophobic film. Properties of nano-SiO2 represented by infrared spectroscopy and surface topography of the film observed under scanning electron microscope (SEM) indicated that the film surface had a coarse micro–nano binary structure; the effect of nano-SiO2 doping amount on the film’s surface topography and the effect of such surface topography on hydrophilicity of the film were studied; contact angle of water on such surface was tested as 0° by the surface contact angle tester and spread quickly; the underwater contact angle to oil was 158°, showing superhydrophilic and underwater superoleophobic properties. The effect of the dosing amount of cross-linking agent to the waterproof swelling property and the permeate flux of the film were studied; the oil–water separation effect of the film to oil–water suspension and oil–water emulsion was studied too, and in both cases the separation efficiency reached 99%, which finally reduced the oil content to be lower than 50 mg/L. The effect of filtration times to permeate flux was studied, and it was found that the more hydrophilic the film was, the stronger the stain resistance would be, and the permeate flux would gradually decrease along with the increase of filtration times.

Conductive Polymer-Coated Mesh Films With Tunable Surface Wettability For Separation Of Oils And Organics From Water

Fabrication of a Novel Superhydrophobic and Superoleophilic Surface by One-Step Electrodeposition Method for Continuous Oil/water Separation

Ni-Al Layered Double Hydroxides (ldhs) Coated Superhydrophobic Mesh with Flower-Like Hierarchical Structure for Oil/water Separation

Zwitterionic Polymer Hairy Coating onto Mesh toward Easy Oil/Water Separation

Micro/Nanoscale Structured Superhydrophilic and Underwater Superoleophobic Hybrid-Coated Mesh for High-Efficiency Oil/Water Separation

Facile fabrication of durable mesh with reversible photo-responsive wettability for smart oil/water separation

A Novel Solution-Controlled Hydrogel Coated Mesh for Oil/water Separation Based on Monolayer Electrostatic Self-Assembly

A durable Ni3S2 coated mesh with reversible transition between superhydrophobicity and underwater superoleophobicity for efficient oil-water separation

Stable Highly Hydrophobic and Oleophilic Meshes for Oil–water Separation

pH-responsive nonwoven fabric with reversibly wettability for controllable oil-water separation and heavy metal removal

Facile fabrication of hydrophilic-underwater superoleophobic poly(N-isopropylacrylamide) coated PP/LPET nonwoven fabrics for highly efficient oil/water separation

Fabrication of a superhydrophilic/underwater superoleophobic stainless steel mesh for oil/water separation with ultrahigh flux

Hydrophilic/oleophobic Copper Mesh for Oil-water Separation

Fabrication of fluorine-free pH-responsive functionalized mesh via thiol-ene click chemistry for oil-water separation

Fabrication of dual-sensitive heterogeneity organohydrogel with temperature/surrounding-phase regulatory superomniphobic surface for on-demand oil/water separation

A Facile Solvent-Manipulated Mesh for Reversible Oil/Water Separation

Reversible Superwettability Switching of a Conductive Polymer Membrane for Oil-Water Separation and Self-Cleaning

Ultra-robust Superhydrophobic/superoleophilic Stainless Mesh Coated by PTFE/SiO 2 for Oil/water Separation

A facile route for the fabrication of a superhydrophilic and underwater superoleophobic phosphorylated PVA-coated mesh for both oil/water immiscible mixture and emulsion separation

The Fabrication of Ph-Responsive Polymeric Layer with Switchable Surface Wettability on Cotton Fabric for Oil/Water Separation

Fluorine‐free superhydrophobic meshes decorated with porous microspheres for highly efficient oil–water separation