Abstract:A novel ternary eutectic salt KNO3-NaNO2-KNO2 (KNK) was designed and prepared for thermal energy storage (TES) in a concentrating solar power system (CSP). The thermo-physical properties of KNK such as melting point, decomposition temperature, fusion enthalpy, density, viscosity, thermal conductivity and specific heat capacity were determined respectively. Furthermore the thermal energy storage capacity was evaluated and discussed. Then a comparison of the thermo-physical properties between commercial Hitec and KNK was carried out. KNK showed smaller density, lower viscosity, slightly smaller thermal conductivity, much higher specific heat capacity and bigger thermal energy storage capacity. Raman spectrum displayed that the N-O of NaNO2 frequency peak at about 820 cm−1 in KNK had more significant shift, which could be attributed to a stronger interaction between Na+ and NO2−. Scanning electron microscope (SEM) showed K and Na elements of Hitec were uniformly distributed, while K and Na elements of KNK were in complementary distribution which could be caused by stronger repulsion between Na+ and K+. It was concluded that the stronger interaction and repulsion were correlated to the higher specific heat capacity. Molecular dynamics (MD) simulation was performed to explore the different macroscopic properties of two molten salts from the perspective at molecular level. The characterizations of radial distribution functions (RDF), coordination number and angular distribution functions (ADF) suggested that the interaction between Na+ and NO2− is stronger and that the arrangement of ion clusters was looser in KNK. The results were in good agreement with the analysis of Raman spectrum and SEM.

Investigation of the Ca(NO 3 ) 2 –NaNO 3 mixture for latent heat storage

Thermophysical Properties of Ca(NO3)2-NaNO3-KNO3 Mixtures for Heat Transfer and Thermal Storage

Experimental Investigation on a MnCl2–CaCl2–NH3 Thermal Energy Storage System

Thermal Characterization of Nitrates and Nitrates/expanded Graphite Mixture Phase Change Materials for Solar Energy Storage

Charge Assessment for Nitrate-Based Salt as a Phase Change Material for a Medium-Temperature Latent Storage Tank

Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems

Demonstration of Mg(NO3)2·6H2O-based Composite Phase Change Material for Practical-Scale Medium-Low Temperature Thermal Energy Storage

Investigation on thermal performance of quinary nitrate/nitrite mixed molten salts with low melting point for thermal energy storage

Thermal Conductivity of Eutectic Nitrates and Nitrates/Expanded Graphite Composite as Phase Change Materials

Experimental Study on the Thermal Stability of a New Molten Salt with Low Melting Point for Thermal Energy Storage Applications

Study on the preparation and thermal properties of binary mixed chloride salts

The Impact of Binary Salt Blends’ Composition on Their Thermophysical Properties for Innovative Heat Storage Materials

Novel high specific heat capacity ternary nitrate/nitrite eutectic salt for solar thermal energy storage

Thermal conductivity of the ternary eutectic LiNO 3 –NaNO 3 –KNO 3 salt mixture in the solid state using a simple inverse method

Eutectic Na2CO3–NaCl Salt: A New Phase Change Material for High Temperature Thermal Storage

Preparation and Thermal Property Characterization of NaCl–Na2CO3–Na2SO4 Eutectic Salt Mixed with Carbon Nanomaterials for Heat Storage

Experimental study on optimized composition of mixed carbonate for phase change thermal storage in solar thermal power plant

Mg(NO3)2·6H2O-LiNO3 eutectic/expanded graphite composite phase change material for thermal energy storage applications

A Novel Binary Mixture of Caprylic Acid/nonanoic Acid As Latent Heat Storage for Air Conditioning and Cooling

Preparation and Thermal Energy Storage Properties of LiNO 3 -Kcl-nano 3 /expanded Graphite Composite Phase Change Material

Experimental Investigation of Barium Hydroxide Octahydrate As Latent Heat Storage Materials