Abstract:A macroporous silica-based 4,4',(5')-di(t-butylcyclohexano)-18-crown-6 (DtBuCH18C6)-imprepated polymeric composite, (DtBuCH18C6 + Oct)/SiO(2)-P, was synthesized by molecular modification of DtBuCH18C6 with I-octanol through hydrogen bonding. This was achieved by impregnating and immobilizing DtBuCH18C6 and 1-octanol molecules in the pores of macroporous SiO(2)-P particles possessing a mean pore diameter of 50 pill. The adsorption of some fission and non-fission products contained in highly active liquid waste (HLW) such as Ru(III), Mo(VI), Pd(II), Na(I), K(I), Cs(I), Sr(II), Ba(II), La(III) and Y(III) onto (DtBuCH18C6 + Oct)/SiO(2)-P was investigated at 298 K. The effects of contact time and HNO(3) concentration within the range 0.1-5.0 M were examined. Increasing the HNO(3) concentration from 0.1 M to 2.0 M led to a significant increase in the adsorption of Sr(II), followed by a decrease when the HNO(3) concentration yeas increased further to 5.0 M. The optimum concentration of HNO(3) in the adsorption of Sr(11) onto (DtBuCH18C6 + Oct)/SiO(2)-P was determined as 2.0 M. For the other ions examined with the exception of Ba(II), very weak or almost non-existent adsorption capacities were observed at all HNO(3) concentrations. The leaching of total organic carbon (TOC) from (DtBuCH18C6 + Oct)/SiO(2)-P into the aqueous phase was evaluated. Over the HNO3 concentration range 0.1-3.0 M, the quantity of TOC leached was ca. 40 ppm compared with 355.8-373.3 ppm at HNO(3) concentrations above 4.0 M. Significant reduction of TOC leaching from the macroporous silica-based DtBuCH18C6-impregnated polymeric composite was achieved in 2.0 M HNO3. Such behaviour could be of great benefit in using (DtBuCH18C6 + Oct)/SiO(2),-P for the partitioning of Sr(II) from HLW by extraction chromatography.

Synthesis of Alkyl Substituted Dicyclohexano-18-crown-6 Homologues for Strontium Extraction in HNO3 Media

Impregnation synthesis of a novel macroporous silica-based crown ether polymeric material modified by 1-dodecanol and its adsorption for strontium and some coexistent metals

Preparation of Macroporous Silica-Based Crown Ether Materials for Strontium Separation

Development of a new simultaneous separation of cesium and strontium by extraction chromatograph utilization of a hybridized macroporous silica-based functional material

SPEC Process III. Synthesis of a Macroporous Silica-based Crown Ether-impregnated Polymeric Composite Modified with 1-Octanol and its Adsorption Capacity for Sr(II) Ions and Some Typical Co-existent Metal Ions

Synthesis of a novel macroporous silica-based polymeric material containing 4,4′,(5′)-di(tert-butylcyclohexano)-18-crown-6 functional group and its adsorption mechanism for strontium

HNO3 extractability, distribution of macrocycle and radiation stability of strontium-selective extractant based on the dicyclohexano-18-crown-6 solution in 1,1,7-trihydrododecafluoroheptanol

SPEC Process II. Adsorption of Strontium and Some Typical Co-Existent Elements Contained in High Level Liquid Waste Onto a Macroporous Silica-Based Crown Ether Impregnated Functional Composite

Extraction Equilibrium of Typical Alkali Metals with a Macrocyclic Calixbiscrown Derivative in Two-Phase System HNO3/o-Nitroanisole and HNO3/HCCl3

Removal of Cesium by Countercurrent Solvent Extraction with A Calix[4]Crown Derivative

Co-condensation Synthesis of a Novel DCH18C6-functionalized Organosilica for Strontium Adsorption

Extraction of cesium and strontium from nitric acid hlw by a mixture of extractants of -18-crown-6 and -21-crown-7 derivatives in organic solvents

Solvent Extraction of Cesium with A New Compound Calix[4]Arene-Bis[(4-Methyl-1,2-Phenylene)-Crown-6]

Extraction equilibrium and thermodynamics of cesium with a new derivative of calix[4]biscrown

Extraction Behavior of Cesium and Some Typical Fission and Non-Fission Products with a New 1,3-Di(1-decyloxy)-2,4-crown-6-calix[4]arene

Novel Polysiloxane Resin Functionalized with Dicyclohexano-18-crown-6 (DCH18C6): Synthesis, Characterization and Extraction of Sr(II) in High Acidity HNO3 Medium.

Extraction of Cesium and Some Typical Metals with a Supramolecular Recognition Agent 1,3-Bis(1-nonyloxy)-2,4-crown-6-calix[4]arene

Investigation on the extraction of strontium ions from aqueous phase using crown ether-ionic liquid systems

Separation of strontium ions from a simulated highly active liquid waste using a composite of silica-crown ether in a polymer.

Solvent Extraction of Strontium from Nitric Acid Medium by Di-Tert-butyl Cyclohexano-18-crown-6 in N-Octanol: Extraction Behavior and Flowsheet Demonstration

Coextraction of Strontium and Cesium by Dicyclohexano-18Crown-6/25, 27-Bis(2-propyloxy)calix[4]-26, 28-Crown-6-n-octanol