Abstract:Fresnel reflectivity suppression using random nano-structured surfaces (rARSS) has been investigated by numerous groups in recent years. A variety of measurement methods are used, from simple specular reflection to directional transmission and combinations thereof. In most cases, there is the assumption that the incident irradiance is only divided between specular reflection (R) and on-axis transmission (T), ignoring wavelength-dependent bidirectional scatter radiance distributions that attenuate both on-axis intensities. Broadband spectroscopic measurements over limited surface areas are common, assuming that there is good structure uniformity across the optical surfaces under test. Process development of rARSS requires repetitive functional testing and measurement, which at times is a result of intrusive techniques, such as electron microscopy of sample crossections, albeit in limited surface areas. We explored a double amplitude-division interferometric non-invasive technique, based on a Fabry-Perot etalon/Michelson interferometer (FPE/MI) combined instrument, to extract the absolute specular reflectance and on-axis transmission of single optical surfaces in the midwave to longwave infrared (2.0-12 μm), without sacrificing the samples. The technique was applied to before-and-after rARSS addition on infrared transmissive silicon, gallium arsenide, and germanium windows. The entire FPE/MI test system losses were taken into account, which can be considerable due to differences on sample setup conditions. We determined the interference ordinal-area of the FPE resonances within the MI scanning sub-bands, and extracted single surface values for R and T, which agree with independent spectroscopic measurements. The technique can be applied to large surface areas, limited only by the size of the MI aperture.

Measurement of Reflectance Covering Uv to Mir of Solar Selective Coatings by One Fourier Transform Spectrometer

Spectrophotometer for Measuring Spectral Transmittance and Reflectance of Large Aperture Optical Element

Measurement of the Group Refractive Index of Bulk Material Using White-Light Spectral Interferometry

Group Delay Dispersion Measurement of a Dispersive Mirror by Spectral Interferometry: Comparison of Different Signal Processing Algorithms.

Quantitative Infrared Spectroscopy of Environmentally Sensitive and Rough Materials.

Measuring Spectral Reflectance and Transmittance of Heavy Caliber Optical Thin-Film

Optical surface absolute specular reflectance measurement using an infrared etalon and interferometer combination method

Measuring Spatially Varying, Multispectral, Ultraviolet Bidirectional Reflectance Distribution Function with an Imaging Spectrometer

An Apparatus For The Measurement Of Spectral Specular Reflectance Of Spot Area In Curved Surfaces

Measurement of Equivalent BRDF on the Surface of Solar Panel with Periodic Structure

Measurement of Bidirectional Reflection Distribution Function on Material Surface

Determination and Calculation for the Heat Reflectance of Solar Reflective Coatings

The Measurements Of Spectral Reflectance Spatial Distribution On Mc-Si Solar Cell Surface

Measuring Method of the Spectral Absorptivity for Solar Selective Absorption Coatings at High Temperature

Optomechanical Design and Application of Solar-Skylight Spectroradiometer

Measurement and Modeling of Bidirectional Reflectance Distribution Function (BRDF) on Material Surface

Field Measurement of the Spectral Emissivity of Terrestrial Surface Materials with the Fourier Transform Infrared Spectrometer

Measuring of Spectral Brdf Using Fiber Optic Spectrometer

DIRECT MEASUREMENT OF THE ABSORBING SURFACE SPECTRUM FOR SOLAR COLLECTOR TUBE

3-D Measurements of Bidirectional Reflectance Distribution Functions of Target Surfaces with Different Coats

Laboratory-based Reflectometer Using Line Spectra of an RF-induced Gas-Discharge Lamp in 30- to 200-Nm Wavelength Range