Abstract:Hydraulic fracturing was an important means for tight gas reservoir development in an attempt to achieve commercial production and to improve productivity. For fracturing job in low-pressure and tight gas reservoir, it is vital to reduce invasion by fluids and improve fluid flowing back, which directly affect the individual-well performance. Conventional water-based fracturing technology was apt to cause problems such as difficulty to flow back for fracturing fluid and serious water lock damage, hence, in this paper, CO2 foam hydraulic fracturing techniques was studied to manage the plaguy trouble. Firstly, the widespread using guar gum can cross-linked and keep stable viscosity only under the condition of the PH (hydrogen ion concentration) >7, however, the CO2 solution PH is 4 to 5. So, novel acid CO2 foam fracturing fluids were developed based on the study of high temperature crosses linker and Environmentally friendly foaming agent, which efficiently resolved the cross-linking in acid conditions, also the additives are environment friendly and low cost to accommodate the low oil price. Systematically tests indicated that the fluid possessed the advantage of improved rheological characteristic, good proppant suspension ability, low friction and thoroughly and rapidly gel breaking without residues. The fluids used a few additives and were easy to prepare on construction site. Secondly, for the deep-buried reservoir, the pipe friction is large especially for CO2 fracturing fluid owing to its complicated phase state, whereas the treating pressure is limited, which induce the displacement couldn’t be increased to the required value. So, the formula for calculating pipe friction was deducted in detail to forecast wellhead pressure, and the field experimental results proved its correctness. Then, pumping string and injection scheme were optimized to reduce operating pressure and guarantee the construction success, thirdly, in order to enhance the amount of adding proppants, the optimization design of variable foam quality and variable flow rate were adopted in according to the reservoir conditions, finally, extraordinary fracturing design, integrating ordinary fracturing design and tip screen-out (TSO), were employed to improve the artificial fracture conductivity, under flush technique was applied to keep the near-wellbore fracture conductivity. Field application showed that, using CO2 foam fracturing technology, a large amount of sand fracturing treatment was carried out successfully in vertical wells in Sulige gas field at the depth of 3400 m in china, the flow back of gel breaking liquid was rapid and flow completely without pumping. The average daily gas output of experimental well is 2.2 times that of the same geological conditions of adjacent wells treated by traditional water-based fracturing. It shows effectiveness of the optimization design method and good application prospect of CO2 foam fracturing in low pressure tight gas reservoir.

Water Requirements for Shale Gas Fracking in Fuling, Chongqing, Southwest China

Prospects for Shale Gas Production in China: Implications for Water Demand

Salinization of groundwater in shale gas extraction area in the Sichuan Basin, China: Implications for water protection in shale regions with well-developed faults

Water footprint of shale gas development in China in the carbon neutral era

Towards efficient water management in large-scale shale gas fields of China

Recycling Flowback Water for Hydraulic Fracturing in Sichuan Basin, China: Implications for Gas Production, Water Footprint, and Water Quality of Regenerated Flowback Water

Watershed-scale assessment of surface water-related risks from shale gas development in mountainous areas, China

Hydrogeochemistry and indicators of flowback and produced water from wells that are hydraulically fractured with recycled wastewater: A case study of the Changning gas field in the Sichuan Basin

Shale gas wastewater geochemistry and impact on the quality of surface water in Sichuan Basin

Hydrochemistry, Sources and Management of Fracturing Flowback Fluid in Tight Sandstone Gasfield in Sulige Gasfield (China)

Research on Waterless Fracturing Technology in Tight Gas Formation in China

A Comparison between Shale Gas in China and Unconventional Fuel Development in the United States: Water, Environmental Protection, and Sustainable Development

Environmental risks of shale gas exploitation and solutions for clean shale gas production in China

Geological factors controlling high flowback rates of shale gas wells in the Changning area of the southern Sichuan Basin, China

Comparison of the Hydraulic Fracturing Water Cycle in China and North America: A Critical Review

Big Data Analysis and Research on Fracturing Construction Parameters of Shale Gas Horizontal Wells—A Case Study of Horizontal Wells in Fuling Demonstration Area, China

Evaluation of Groundwater Resources and Exploitation Potential: A Case from Weifang City of Shandong Province in China

Wastewaters Coproduced with Shale Gas Drive Slight Regional Salinization of Groundwater

Hydrocarbon source rock characteristics and shale gas potential of Permian marine shales in the Lower Yangtze region of South China

Shale gas potential in China: A production forecast of the Wufeng-Longmaxi Formation and implications for future development

Chemical characterization in hydraulic fracturing flowback and produced water (HF-FPW) of shale gas in Sichuan of China