Abstract:Cubic boron nitride (cBN) superabrasive grinding wheels exhibit unique advantages in the grinding of difficult-to-cut materials with high strength and toughness, such as titanium alloys and superalloys. However, grinding with multilayered metallic cBN superabrasive wheels faces problems in terms of grain wear resistance, the chip storage capability of the working layers and the stability and controllability of the dressing process. Therefore, in this work, novel metallic cBN superabrasive wheels with aggregated cBN (AcBN) grains and open pore structures were fabricated to improve machining efficiency and surface quality. Prior to the grinding trials, the air-borne abrasive blasting process was conducted and the abrasive blasting parameters were optimized in view of wear properties of cBN grains and metallic matrix materials. Subsequently, the comparative experiments were performed and then the variations in grinding force and force ratio, grinding temperature, tool wear morphology and ground surface quality of the multilayered AcBN grinding wheels were investigated during machining Ti–6Al–4V alloys. In consideration of the variations of grain erosion wear volume and material removal rate per unit of pure metallic matrix materials as the abrasive blasting parameters changes, the optimal abrasive blasting parameters were identified as the SiC abrasive mesh size of 60# and the abrasive blasting distance and time of 60 mm and 15 s, respectively. The as-developed AcBN grains exhibited better fracture toughness and impact resistance than monocrystalline cBN (McBN) grains because of the existence of metal-bonded materials amongst multiple cBN particles that decreased crack propagation inside whole grains. The metallic porous AcBN wheels had lower grinding forces and temperature and better ground surface quality than vitrified McBN wheels due to the constant layer-by-layer exposure of cBN particles in the working layer of the AcBN wheels.

Modelling and Analysis of the Bonding Mechanism of CBN Grains for Electroplated Superabrasive Tools—part 2: Finite Element Modelling and Experimental Verification

Modelling and Analysis of the Bonding Mechanism of CBN Grains for Electroplated Superabrasive Tools—part 1: Introduction and Application of a Novel Approach for Determining the Bonding Force and the Failure Modes

The Measurement and Analysis of Micro Bonding Force for Electroplated CBN Grinding Wheels Based on Response Surface Methodology

The Study of the CBN Grain Shape on Its Microcutting Performance Based on Finite Element Method

The Modelling and Experimental Verification of the Grinding Wheel Topographical Properties Based on the 'Through-the-process' Method

The study on the influences of superabrasive grain spatial orientation for microcutting processes based on response surface methodology

Finite element investigation on the evolution of wear and stresses in brazed CBN grits during grinding

The Modelling and Analysis of Topographical Properties with the 'Through-the-process' Grinding Wheel Model

Effect of grain contents of a single-aggregated cubic boron nitride grain on material removal mechanism during Ti–6Al–4V alloy grinding

Grain erosion wear properties and grinding performance of porous aggregated cubic boron nitride abrasive wheels

Micro-fracture behavior of a single-aggregated cBN grain and its relation to material removal in high-speed grinding of Ti–6Al–4V alloys

Simulation to Microtopography Formation of CBN Active Abrasives on a Honing Wheel Surface

Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant

Analysis on the Influences of CBN Grain Spatial Orientation on Micro-Cutting Processes Based on Response Surface Methodology

CBN grain wear and its effects on material removal during grinding of FGH96 powder metallurgy superalloy

Study on the removal mechanism in multi-abrasive micro-grinding of nickel-based superalloy

Dressing Mechanism and Evaluations of Grinding Performance with Porous cBN Grinding Wheels

Stress Characteristics and Fracture Wear of Brazed CBN Grains in Monolayer Grinding Wheels

Self-sharpening property of porous metal-bonded aggregated cBN wheels during the grinding of Ti–6Al–4V alloys

Finite Element Modelling and Experimental Validation of the Graphite Cutting Process

Evolution of undeformed chip thickness and grinding forces in grinding of K4002 nickel-based superalloy using corundum abrasive wheels