Abstract:In order to derive a thermal error model that can better reflect the physical model of the machine tool to improve the model’s robustness and also has an explicit and simpler expression for real-time thermal error compensation, a new thermal error model of a heavy gantry-type machine tool was established. Firstly, multi-body system (MBS) was used to transform the thermal error modeling of the machine tool into the thermal error modeling of the discrete parts of the machine tool. Then, as for the thermal error modeling of the slider-ram structure, by analyzing the characteristic of the thermal expansion of a one-dimensional rod, power function was considered to better reflect that relationship in which the index number can represent the distance between heat source and the temperature measurement location. Then, its thermal error model was expressed as the superposition of two power functions according to the thermal superposition principle and the distribution of the heat sources. As for the thermal error modeling of gantry structure, it was simplified to a frame with −3 DOF. And its thermal error model was derived by virtual work principle (VWP). Then, the whole thermal error model of the machine tool was embedded into the Simens840d NC system and S7-300 programmable logic controller to establish a thermal error compensation system. Finally, the error model and compensation was verified by machining a rhombus-shaped workpiece of which different zones reflect the thermal error in different directions. And the workpiece was measured by a CMM. The results show that the average thermal error can be reduced from around 101 to 13.5 μm after the compensation, indicating the effectiveness of the thermal error modeling and compensation for the practical application.

A hybrid thermal error modeling method of heavy machine tools in z -axis

Experiment-based Thermal Error Modeling Method for Dual Ball Screw Feed System of Precision Machine Tool

Thermal error modeling and forecasting for NC machine tools based on intelligent technology

Investigation into effect of thermal expansion on thermally induced error of ball screw feed drive system of precision machine tools

A New Thermal Error Modeling Method for CNC Machine Tools

An Efficient Error Prediction and Compensation Method for Coordinated Five-Axis Machine Tools under Variable Temperature

Thermal error modeling of spindle and dynamic machining accuracy reliability analysis of CNC machine tools based on IA and LHSMC

Thermal Error Modeling and Compensation of Spindles Based on LS-SVM

Thermal Error Modeling and Compensation of a Heavy Gantry-Type Machine Tool and Its Verification in Machining

Thermal Error Modeling and Prediction of A Heavy Floor-Type Milling and Boring Machine Tool

Research on Thermal Error Modeling and Prediction of Heavy CNC Machine Tools

Thermal Error Modeling of Machine Tool Based on Fuzzy C-Means Cluster Analysis

Measurement, Modeling and Compensation of Thermal Error for Machine Tools

Thermal Deformation Errors Compensation System of Machine Tools

Thermal Error Modeling and Compensation of A Cnc Machining Center

Modeling and Estimating Thermal Error in Precision Machine Spindles

Utilization of Heat Quantity to Model Thermal Errors of Machine Tool Spindle

Thermal Error Modeling of Machine Tool Based on Fuzzy C -Means Cluster Analysis and Minimal-Resource Allocating Networks

Modeling and analysis of axial thermal error in machining space of double-swing five-axis machine tool

Thermal Error Modeling Of Machine Tools Based On M-Ran

A Predictive Model for Temperature Rise of Spindle–Bearing Integrated System