ChemInform Abstract: Novel Bi‐Based Iodate Photocatalysts with High Photocatalytic Activity.

Hongwei Huang,Ying He,Ran He,Xingxing Jiang,Zheshuai Lin,Yihe Zhang,Shichao Wang

DOI: https://doi.org/10.1002/chin.201412009

2014-01-01

ChemInform

Abstract:AbstractThe compounds BiIO4 (I) and Bi(IO3)3 (II) are hydrothermally synthesized from aqueous solutions of stoichiometric quantities of Bi(NO3)3 and I2O5 (autoclave, 180 °C, 24 h).

What problem does this paper attempt to address?

Novel Bi-based iodate photocatalysts with high photocatalytic activity

Hongwei Huang,Ying He,Ran He,Xingxing Jiang,Zheshuai Lin,Yihe Zhang,Shichao Wang

DOI: https://doi.org/10.1016/j.inoche.2013.12.024

IF: 3.428

2014-01-01

Inorganic Chemistry Communications

Abstract:Two novel Bi-based iodates BiIO4 and Bi(IO3)3 with nonbonding layered structures were successfully synthesized via a facile hydrothermal method. The as-prepared samples were characterized by XRD, SEM and DRS. Their optical band gaps and energy levels have been determined, which were also confirmed by the first principle calculations. BiIO4 and Bi(IO3)3 have an indirect and direct transition optical band-gap of 2.94 and 3.58eV, respectively. The photocatalytic activities of the samples were determined by oxidative decomposition of methyl orange (MO) in aqueous solution. The results revealed that BiIO4 and Bi(IO3)3 display high photocatalytic activity, much better than that of Bi-based photocatalyst Bi2O2CO3. Especially, the photocatalytic efficiency of BiIO4 is about 2.2 times higher than that of commercial TiO2 (P25), though the BET surface is just 1/20 of that of P25. The layered structure should be responsible for the hole–electron separation and transport of charge.
ChemInform Abstract: Y(IO3)3 As a Novel Photocatalyst: Synthesis, Characterization, and Highly Efficient Photocatalytic Activity.

Hongwei Huang,Ying He,Ran He,Zheshuai Lin,Yihe Zhang,Shichao Wang

DOI: https://doi.org/10.1002/chin.201441015

2014-01-01

ChemInform

Abstract:AbstractThe title compound is hydrothermally synthesized from aqueous solutions of stoichiometric amounts of Y(NO3)3 and I2O5 (autoclave, 180 °C, 24 h) and characterized by powder XRD, SEM, TEM, ESR, UV/VIS diffuse reflectance spectroscopy, and DFT band structure calculations.
ChemInform Abstract: Two Bi‐Based Phosphate Photocatalysts: Crystal Structure, Optical Property and Photocatalytic Activity.

Hongwei Huang,Gong Chen,Yihe Zhang

DOI: https://doi.org/10.1002/chin.201426014

2014-01-01

ChemInform

Abstract:AbstractNa3Bi2(PO4)3 (I) and Na3Bi(PO4)2 (II) are prepared by solid state reaction of stoichiometric mixtures of Bi2O3, Na2CO3, and NH4H2PO4 (650 °C, 20 h).
ChemInform Abstract: A Bi‐Based Oxychloride PbBiO2Cl As a Novel Efficient Photocatalyst.

Zhichao Shan,Xinping Lin,Minling Liu,Hanming Ding,Fuqiang Huang

DOI: https://doi.org/10.1002/chin.200935011

2009-01-01

ChemInform

Abstract:AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.
ChemInform Abstract: A Novel Bi‐Based Oxychloride CdBiO2Cl: Crystal Structure, Electronic Structure and Photocatalytic Activity.

Fuqiang Huang,Jianjun Wu,Xinping Lin,Zhen Zhou

DOI: https://doi.org/10.1002/chin.201105009

2011-01-01

ChemInform

Abstract:AbstractCdBiO2Cl is synthesized by solid state reaction of BiOCl and CdO (alumina crucible, 700 °C, 24 h) and characterized by powder XRD, UV/VIS diffuse reflectance spectroscopy, and TB‐LMTO band structure calculations.
Enhanced Photocatalytic Activity of Bi24O31Br10: Constructing Heterojunction with BiOI

Xi Lou,Jun Shang,Liang Wang,Haifeng Feng,Weichang Hao,Tianmin Wang,Yi Du

DOI: https://doi.org/10.1016/j.jmst.2016.05.002

2016-01-01

Journal of Material Science and Technology

Abstract:Bismuth-based compounds have been regarded as an important class of visible-light photocatalysts due to their special electronic structures. In this paper, iodide ions are introduced to modify bismuth-based compound, Bi 24 O 31 Br 10 , forming a Bi 24 O 31 Br 10 /BiOI heterojunction structure. A significant enhancement of photocatalytic activity compared to the parent compounds is observed in de-coloration of rhodamine B（Rh.B） solution. The improved photocatalytic property of Bi 24 O 31 Br 10 /BiOI heterojunction is ascribed to the unique electronic structure consisting of complementary band structures of BiOI and Bi 24 O 31 Br 10 .Iodide ions are regarded as an effective reagent to construct bismuth-based photocatalytic heterojunctions with improved photocatalytic activity.
Photocatalytic Activity of a Bi‐Based Oxychloride Bi3O4Cl.

Xinping Lin,Tao Huang,Fuqiang Huang,Wendeng Wang,Jianlin Shi

DOI: https://doi.org/10.1002/chin.200718020

2007-01-01

ChemInform

Abstract:ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.
Understanding the composition and electronic structure dependent photocatalytic performance of bismuth oxyiodides

mingce long,peidong hu,haodong wu,yuanyuan chen,beihui tan,weimin cai

DOI: https://doi.org/10.1039/c4ta06134a

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:A series of bismuth oxyiodides were obtained by calcining the precursor compound (Bi7O9I3). Their compositions and electronic structures were analyzed by various physicochemical characterizations, slurry method measurements and theoretical calculations. Iodine vacancies appearing at elevated temperatures before the phase transition contribute to the increased photocatalytic activity, which can be attributed to the increase of band gaps, downward shifts of band potentials and the change of semiconductor behavior from p type to n type. The catalyst obtained at 400 degrees C displayed an excellent photocatalytic performance for phenol degradation, and it was characterized as a composite of two components with well-matched band potentials and good contact interfaces. Photogenerated holes were revealed as the main active species in the phenol degradation. This study could bring insights into the fabrication of novel highly efficient bismuth oxyiodide composites by simultaneously controlling the extent of phase transition and the amount of iodine vacancies.
Photocatalytic Behavior Of A New Series Of Photocatalysts, (Ba2bibio6)-Bi-(V)-O-(Iii) And (Ba2sbbio6)-Bi-(V)-O-(Iii)

Zs Li,N Xu,Yf Chen,Zg Zou

DOI: https://doi.org/10.1163/1568567053956716

IF: 3.134

2005-01-01

Research on Chemical Intermediates

Abstract:Oxide photocatalysts, (Ba2BiBiO6)-Bi-(V)-O-(III) and (Ba2SbBiO6)-Bi-(V)-O-(III) with the same monoclinic structure, were synthesized by a solid state reaction method. Their band gaps were determined by UV-Vis diffuse reflectance spectroscopy to be about 2.2 and 1.7 eV, respectively. These photocatalysts showed photocatalytic H-2 evolution from an aqueous CH3OH solution under visible light irradiation. The rates of H-2 evolution are 0.49 and 0.67 mu mol/h for (Ba2BiBiO6)-Bi-(V)-O-(III) and (Ba2SbBiO6)-Bi-(V)-O-(III), respectively. They also showed activity for photocatalytic O-2 evolution from an aqueous AgNO3 solution under visible light irradiation and the rates of O-2 evolution were found to be 1.6 and 2.7 mu mol/h, respectively.
Iodine doped Z-scheme Bi2O2CO3/Bi2WO6 photocatalysts: Facile synthesis, efficient visible light photocatalysis, and photocatalytic mechanism

Zhuomin Qiang,Ximeng Liu,Feng Li,Taihai Li,Meng Zhang,Harishchandra Singh,Marko Huttula,Wei Cao

DOI: https://doi.org/10.1016/j.cej.2020.126327

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:The Bi-based hierarchical multi-component photocatalytic system is an important player in energy and environmental catalysis due to its full-spectrum light absorption and stable separation of photo-generated charges. In this study, a novel family of iodine doped Bi2O2CO3/Bi2WO6 heterojunctions was successfully developed by a facile ionic liquid assisted solvothermal method. A visible light photocatalytic H-2 production rate of 664.5 mu mol g(-1) h(-1) (0.3I-Bi2O2CO3/Bi2WO6 with 3% Pt) has been durably obtained, much higher than those of pristine and undoped counterparts. The photocatalysts are also capable for persistent pollutant and dye degradation. Through electrochemical and spectroscopic tests and density functional theory calculation, the enhanced photocatalytic activity is attributed to formation of the Z-scheme photocatalyst. Therein, the lowered and indirect bandgap and heterojunctional band alignment spontaneously benefit visible light harvesting, electron-hole pair separation, and proton reduction. Besides a facile synthesis for effective photocatalysis, the Z-scheme mechanism is hoped to facilitate the design and realization of similar systems for photocatalytic H-2 evolution and organic hazards decontamination.
Hydrothermal Synthesis, Nonlinear Optical Property and Photocatalytic Activity of a Non-Centrosymmetric AgIO3 Photocatalyst under UV and Visible Light Irradiation

Hongwei Huang,Ying He,Yuxi Guo,Ran He,Zheshuai Lin,Yihe Zhang

DOI: https://doi.org/10.1016/j.solidstatesciences.2015.05.008

IF: 3.752

2015-01-01

Solid State Sciences

Abstract:AgIO3 as a novel photocatalyst was prepared via a facile hydrothermal route. The microstructure, electronic structure, optical and nonlinear optical (NLO) properties of AgIO3 were investigated by a series of experimental and theoretical methods, including X-ray powder diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), high resolution TEM (HRTEM), Brunauer–Emmett–Teller (BET), UV–vis diffuse reflectance spectra (DRS), second harmonic generation (SHG) measurements and the first principle calculation. The results revealed that AgIO3 exhibits a strong SHG response and excellent photocatalytic performance with high stability under both UV and visible light irradiation. The advantages of this material, such as large polarizability resulted from the NCS structure, polar IO3− anion and layered structure should be responsible for the high photocatalytic activity of AgIO3. The present work may shed new light on the design of multifunctional materials.
Insight into Crystal-Structure Dependent Charge Separation and Photo-Redox Catalysis: A Combined Experimental and Theoretical Study on Bi(IO3)3 and BiOIO3

Hongwei Huang,Fang Chen,Ali Hussain Reshak,Sushil Auluck,Yihe Zhang

DOI: https://doi.org/10.1016/j.apsusc.2018.07.054

IF: 6.7

2018-01-01

Applied Surface Science

Abstract:Solar-driven conversion for CO2 reduction and oxygen activation reactions show huge potentials for energetic and environmental applications. However, the influence of crystal structure of a photocatalyst on its photocatalytic performance has been seldom investigated so far. Herein, to probe the relationship between crystal structure and photocatalytic properties, two bismuth iodates, the centrosymmetric (CS) monoclinic Bi(IO3)(3) and noncentrosymmetric (NCS) orthorhombic BiOIO3 are employed as the models. The photocatalytic reduction and oxidation capabilities of Bi(IO3)(3) and BiOIO3 were surveyed by monitoring the CO2 reduction and oxygen activation reactions. The results revealed that BiOIO3 shows far superior photocatalytic activity than Bi(IO3)(3), which can more efficiently convert CO2 into CO and produce larger amounts of .O-2(-) and OH. The experimental characterizations and DFT calculations co-uncovered that much more efficient charge separation and migration occur in BiOIO3 in compared to Bi(IO3)(3), which are responsible for the obviously higher photoactivity of BiOIO3. This is mainly due to that the NCS crystal structure of BiOIO3 that gives rise to a large macroscopic polarization, facilitating the separation of photogenerated electron-hole pairs. The microscopic first hyperpolarizability for BiOIO3 was calculated to be 2.56 X 10(-30) esu for the dominant component at the static limit and 15.73 x 10(-30) esu at the wavelength 409.1 nm, which well verifies the strong polarization of BiOIO3. This study may furnish the perspective into designing high-performance photocatalytic materials on the basis of crystal structure engineering.
Iodine doped Z-scheme Bi2O2CO3/Bi2WO6 photocatalysts: Facile synthesis, efficient visible light photocatalysis, and photocatalytic mechanism

Zhuomin Qiang,Ximeng Liu,Feng Li,Taihai Li,Meng Zhang,Harishchandra Singh,Marko Huttula,Wei Cao

DOI: https://doi.org/10.1016/j.cej.2020.126327

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:The Bi-based hierarchical multi-component photocatalytic system is an important player in energy and environmental catalysis due to its full-spectrum light absorption and stable separation of photo-generated charges. In this study, a novel family of iodine doped Bi2O2CO3/Bi2WO6 heterojunctions was successfully developed by a facile ionic liquid assisted solvothermal method. A visible light photocatalytic H2 production rate of 664.5 μmol g−1 h−1 (0.3I-Bi2O2CO3/Bi2WO6 with 3% Pt) has been durably obtained, much higher than those of pristine and undoped counterparts. The photocatalysts are also capable for persistent pollutant and dye degradation. Through electrochemical and spectroscopic tests and density functional theory calculation, the enhanced photocatalytic activity is attributed to formation of the Z-scheme photocatalyst. Therein, the lowered and indirect bandgap and heterojunctional band alignment spontaneously benefit visible light harvesting, electron-hole pair separation, and proton reduction. Besides a facile synthesis for effective photocatalysis, the Z-scheme mechanism is hoped to facilitate the design and realization of similar systems for photocatalytic H2 evolution and organic hazards decontamination.
One Pot Hydrothermal Synthesis of a Novel BiIO4/Bi2MoO6 Heterojunction Photocatalyst with Enhanced Visible-Light-driven Photocatalytic Activity for Rhodamine B Degradation and Photocurrent Generation

Hongwei Huang,Liyuan Liu,Yihe Zhang,Na Tian

DOI: https://doi.org/10.1016/j.jallcom.2014.08.262

IF: 6.2

2015-01-01

Journal of Alloys and Compounds

Abstract:A novel BiIO4/Bi2MoO6 heterojunction photocatalyst has been successfully developed by a one-step hydrothermal method for the first time. It was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and diffuse reflection spectroscopy (DRS). Compared to pure BiIO4 and Bi2MoO6, the BiIO4/Bi2MoO6 composite exhibits the much better photoelectrochemical performance for Rhodamine B (RhB) degradation and photocurrent (PC) generation under visible light irradiation (lambda > 420 nm). This enhancement on visible-light-responsive photocatalytic activity should be attributed to the fabrication of a BiIO4/Bi2MoO6 heterojunction, thus resulting in the high separation and transfer efficiency of photogenerated charge carriers. The supposed photocatalytic mechanism dominated by holes (h(+)) was verified by the photoluminescence (PL) spectroscopy, electrochemical impedance spectra (EIS) and active species trapping experiments. (C) 2014 Elsevier B.V. All rights reserved.
ChemInform Abstract: Synthesis, Characterization and Photocatalytic Activity of New Photocatalyst CdBiYO4.

Huiyang Du,Jingfei Luan

DOI: https://doi.org/10.1002/chin.201250010

2012-01-01

ChemInform

Abstract:The title compound is synthesized by solid state reaction of a stoichiometric mixture of CdO, Bi 2 O 3 , and Y 2 O 3 (alumina crucible, 900 °C, 36 h) and characterized by XRD, SEM, TEM, XPS, X‐ray fluorescence spectroscopy, and UV/VIS diffuse reflectance spectroscopy.
Two novel Bi-based borate photocatalysts: Crystal structure, electronic structure, photoelectrochemical properties, and photocatalytic activity under simulated solar light irradiation

Hongwei Huang,Ying He,Zheshuai Lin,Lei Kang,Yihe Zhang

DOI: https://doi.org/10.1021/jp4084184

2013-01-01

Abstract:Through the combination of Bi3+ and a large negative charge ion (BO3)(3-), two novel Bi-based borate photocatalysts Bi4B2O9 and Bi2O2[BO2(OH)] with layered structure have been successfully developed. For the first time, the borates were investigated as photocatalysts. They were synthesized by solid-state reaction and hydrothermal method, respectively, and further characterized by XRD, SEM, TEM, HRTEM, and DRS. Bi4B2O9 and Bi2O2[BO2(OH)] possess direct and indirect transition optical band gaps of 3.02 and 2.85 eV, respectively. Density functional calculations revealed that the valence band (VB) and conduction band (CB) of both borates were composed of hybridized states of the O 2p and Bi 6p or 6s orbitals, and a large dispersion was observed in the energy band of Bi2O2[BO2(OH)]. The photodecomposition experiments demonstrated that Bi4B2O9 and Bi2O2[BO2(OH)] can be used as effective photocatalysts under simulated solar irradiation, and Bi2O2[BO2(OH)] exhibits the high photocatalytic activity, which is 2.5 and 3.2 times compared with that of P25 and Bi2O2CO3, respectively. Moreover, the photocurrent conversion further confirmed that Bi4B2O9 and Bi2O2[BO2(OH)] were potential photofunctional materials. The layered structure with (Bi2O2)(2+) layer, hybridized and dispersion energy band, and large negative charge of (BO3)(3-) ion should be responsible for the high photocatalytic activity of Bi2O2[BO2(OH)].
Synchronously Achieving Plasmonic Bi Metal Deposition and I- Doping by Utilizing Bioio3 As the Self-Sacrificing Template for High-Performance Multifunctional Applications

Shixin Yu,Hongwei Huang,Fan Dong,Min Li,Na Tian,Tierui Zhang,Yihe Zhane

DOI: https://doi.org/10.1021/acsami.5b09994

IF: 9.5

2015-01-01

ACS Applied Materials & Interfaces

Abstract:Herein, we uncover simultaneously achieving plasmonic Bi metal deposition and I- doping by employing wide-band-gap BiOIO3 as the self-sacrificing template. It was synthesized via a facile NaBH4-assisted in situ reduction route under ambient conditions. The reducing extent as well as photocatalytic levels can be easily modulated by controlling the concentration of NaBH4 solution. It is interesting that the band gap of BiOIO3 can be continuously narrowed by the modification, and the photoresponse range is drastically extended to cover the whole visible region. Bi/I- codecorated BiOIO3 not only exhibits profoundly upgraded photoreactivity in comparison with pristine BiOIO3 but also shows universally strong photooxidation properties toward decomposition of multiple industrial contaminants and pharmaceutical, including phenol, 2,4-Dichlorophenol (2,4-DCP), bisphenol A (BPA), dye model Rhodamine (RhB), tetracycline hydrochloride, and gaseous NO under visible light (lambda >= 420 run) or simulated solar light irradiation. It also outperforms the well-known and important photocatalysts C3N4, BiOBr, and Bi2WO6 for NO removal. The cooperative effects from Bi SPR and I- doping endow BiOIO3 with a narrowed band gap and highly boosted separation of charge carriers, thus responsible for the outstanding catalytic activity. The present study provides an absorbing candidate for practical environmental applications and also furthers our understanding of developing high-performance photocatalysts by manipulating manifold strategies in a facile way.
Efficient Mineralization of Organic Pollutants by In-Situ Synthesized Illite/bismuth-Based Heterojunction Photocatalytic Composites

Lu Gao,Bowen Zhou,Wenying Yu,Na Tian,Hongwei Huang,Yihe Zhang

DOI: https://doi.org/10.1016/j.apsusc.2022.155882

IF: 6.7

2022-01-01

Applied Surface Science

Abstract:A series of illite/bismuth-rich bismuth oxyiodide photocatalytic composites (IBCs) were successfully synthesized via an easy in-situ hydrolysis and calcination process. The type of bismuth-rich bismuth oxyiodide materials can be precisely adjusted by controlling the calcination temperature. Among them, T500 (illite@BiOI calcinated at 500 celcius) is a composite of illite-supported Bi4O5I2-Bi5O7I heterojunction, which exhibits superior removal effi-ciency of 94% toward bisphenol A (BPA) within 120 min and 73% on tetracycline hydrochloride (TH) in 60 min under visible light (lambda > 420 nm) irradiation, corresponding 69% and 46% of TOC are thoroughly decomposed respectively, manifesting the outstanding mineralization efficiencies of T500. This excellent photocatalytic performance should be attributed to the highly dispersed Bi4O5I2-Bi5O7I hybrid nanosheets which chemically bonded on layered illite can expose more abundant active sites to absorb O2 and capture charges. Furthermore, the in-situ tight binding interface between Bi4O5I2 and Bi5O7I can generate a strong interface electric field (IEF) to spatially propel the separation of photogenerated electrons and holes. This work proposes a quick and simple preparation method for potentially powerful heterojunction photocatalysts based on affordable and natural clay supports.
MBiO2Cl (MSr, Ba) as novel photocatalysts: Synthesis, optical property and photocatalytic activity

Hongwei Huang,Shuobo Wang,Yihe Zhang,Xu Han

DOI: https://doi.org/10.1016/j.materresbull.2014.11.032

IF: 5.6

2015-01-01

Materials Research Bulletin

Abstract:•Two Bi-based compounds SrBiO2Cl and BaBiO2Cl were explored as photocatalysts.•They were successfully synthesized by a solid-state reaction.•RhB can be effectively photodecomposed by SrBiO2Cl and BaBiO2Cl under UV light.•OH radicals serving as active species play important roles in degradation process.
Coupling of Solid-Solution and Heterojunction in a 2D-1D Core-Shell-like BiOCl0.5I0.5/Bi5O7I Hierarchy for Promoting Full-Spectrum Photocatalysis and Molecular Oxygen Activation.

Hongwei Huang,Chao Zeng,Ke Xiao,Yihe Zhang

DOI: https://doi.org/10.1016/j.jcis.2017.05.048

IF: 9.9

2017-01-01

Journal of Colloid and Interface Science

Abstract:We herein describe the coupling of solid-solution and heterojunction in a 2D-1D BiOCl0.5I0.5/Bi5O7I hierarchical architecture for optimizing photoabsorption, energy band levels and charge separation, thereby promoting the photo-oxidation and molecular oxygen activation performance. BiOCl0.5I0.5/Bi5O7I shows a core-shell-like structure with BiOCl0.5I0.5 thin nanoflakes (∼3 to 8 layers) homogeneously vertical coating on the surface of Bi5O7I strips. The photo-responsive range of BiOCl0.5I0.5/Bi5O7I can be orderly tuned from 450nm to 650nm by increasing the BiOCl0.5I0.5 content. Regardless of visible light (λ>420nm) or UV light (365nm) irradiation, BiOCl0.5I0.5/Bi5O7I casts highly promoted photocatalytic activity in decomposing methyl orange (MO) compared to the BiOCl0.5I0.5 and Bi5O7I. This enhancement on full-spectrum photoreactivity is attributable to the facilitated charge separation derived from BiOCl0.5I0.5/Bi5O7I heterojunction with intimate interfacial interaction, which is approved by transient photocurrent response under visible and UV-vis light. To probe the photocatalytic mechanism, active species trapping tests are performed over BiOCl0.5I0.5, Bi5O7I and BiOCl0.5I0.5/Bi5O7I, which reveal superoxide radical (O2-) and hole (h+) take dominant roles in photo-oxidation reaction. BiOCl0.5I0.5/Bi5O7I was also found possessing a stronger ability in molecular oxygen activation with a O2- production rate of 2.22×10-7molL-1h-1, which far outperforms Bi5O7I (1.35×10-7molL-1h-1) and BiOCl0.5I0.5 (1.54×10-7molL-1h-1). It further corroborates the efficient band charge transfer between BiOCl0.5I0.5 and Bi5O7I. This work may furnish a new concept on smart design of high-performance photocatalytic materials via manipulating multiple strategies.

ChemInform Abstract: Novel Bi‐Based Iodate Photocatalysts with High Photocatalytic Activity.

Novel Bi-based iodate photocatalysts with high photocatalytic activity

ChemInform Abstract: Y(IO3)3 As a Novel Photocatalyst: Synthesis, Characterization, and Highly Efficient Photocatalytic Activity.

ChemInform Abstract: Two Bi‐Based Phosphate Photocatalysts: Crystal Structure, Optical Property and Photocatalytic Activity.

ChemInform Abstract: A Bi‐Based Oxychloride PbBiO2Cl As a Novel Efficient Photocatalyst.

ChemInform Abstract: A Novel Bi‐Based Oxychloride CdBiO2Cl: Crystal Structure, Electronic Structure and Photocatalytic Activity.

Enhanced Photocatalytic Activity of Bi24O31Br10: Constructing Heterojunction with BiOI

Photocatalytic Activity of a Bi‐Based Oxychloride Bi3O4Cl.

Understanding the composition and electronic structure dependent photocatalytic performance of bismuth oxyiodides

Photocatalytic Behavior Of A New Series Of Photocatalysts, (Ba2bibio6)-Bi-(V)-O-(Iii) And (Ba2sbbio6)-Bi-(V)-O-(Iii)

Iodine doped Z-scheme Bi<sub>2</sub>O<sub>2</sub>CO<sub>3</sub>/Bi<sub>2</sub>WO<sub>6</sub> photocatalysts: Facile synthesis, efficient visible light photocatalysis, and photocatalytic mechanism

Hydrothermal Synthesis, Nonlinear Optical Property and Photocatalytic Activity of a Non-Centrosymmetric AgIO3 Photocatalyst under UV and Visible Light Irradiation

Insight into Crystal-Structure Dependent Charge Separation and Photo-Redox Catalysis: A Combined Experimental and Theoretical Study on Bi(IO3)3 and BiOIO3

Iodine doped Z-scheme Bi2O2CO3/Bi2WO6 photocatalysts: Facile synthesis, efficient visible light photocatalysis, and photocatalytic mechanism

One Pot Hydrothermal Synthesis of a Novel BiIO4/Bi2MoO6 Heterojunction Photocatalyst with Enhanced Visible-Light-driven Photocatalytic Activity for Rhodamine B Degradation and Photocurrent Generation

ChemInform Abstract: Synthesis, Characterization and Photocatalytic Activity of New Photocatalyst CdBiYO4.

Two novel Bi-based borate photocatalysts: Crystal structure, electronic structure, photoelectrochemical properties, and photocatalytic activity under simulated solar light irradiation

Synchronously Achieving Plasmonic Bi Metal Deposition and I- Doping by Utilizing Bioio3 As the Self-Sacrificing Template for High-Performance Multifunctional Applications

Efficient Mineralization of Organic Pollutants by In-Situ Synthesized Illite/bismuth-Based Heterojunction Photocatalytic Composites

MBiO2Cl (MSr, Ba) as novel photocatalysts: Synthesis, optical property and photocatalytic activity

Coupling of Solid-Solution and Heterojunction in a 2D-1D Core-Shell-like BiOCl0.5I0.5/Bi5O7I Hierarchy for Promoting Full-Spectrum Photocatalysis and Molecular Oxygen Activation.