Abstract:Adjusting hydrocarbon product distributions in the Fischer–Tropsch (FT) synthesis is of notable significance in the context of so-called X-to-liquids (XTL) technologies. While cobalt catalysts are selective to long-chain paraffin precursors for synthetic jet- and diesel-fuels, lighter (C10–) alkane condensates are less valuable for fuel production. Alternatively, iron carbide-based catalysts are suitable for the coproduction of paraffinic waxes alongside liquid (and gaseous) olefin chemicals; however, their activity for the water–gas-shift reaction (WGSR) is notoriously detrimental when hydrogen-rich syngas feeds, for example, derived from (unconventional) natural gas, are to be converted. Herein the roles of pore architecture and oxide promoters of Lewis basic character on CoRu/Al2O3 FT catalysts are systematically addressed, targeting the development of catalysts with unusually high selectivity to liquid olefins. Both alkali and lanthanide oxides lead to a decrease in turnover frequency. The latter, particularly PrOx, prove effective to boost the selectivity to liquid (C5–10) olefins without undesired WGSR activity. In situ CO-FTIR spectroscopy suggests a dual promotion via both electronic modification of surface Co sites and the inhibition of Lewis acidity on the support, which has direct implications for double-bond isomerization reactivity and thus the regioisomery of liquid olefin products. Density functional theory calculations ascribe oxide promotion to an enhanced competitive adsorption of molecular CO versus hydrogen and olefins on oxide-decorated cobalt surfaces, dampening (secondary) olefin hydrogenation, and suggest an exacerbated metal surface carbophilicity to underlie the undesired induction of WGSR activity by strongly electron-donating alkali oxide promoters. Enhanced pore molecular transport within a multimodal meso-macroporous architecture in combination with PrOx as promoter, at an optimal surface loading of 1 Prat nm–2, results in an unconventional product distribution, reconciling benefits intrinsic to Co- and Fe-based FT catalysts, respectively. A chain-growth probability of 0.75, and thus >70 C% selectivity to C5+ products, is achieved alongside lighter hydrocarbon (C5–10) condensates that are significantly enriched in added-value chemicals (67 C%), predominantly α-olefins but also linear alcohols, remarkably with essentially no CO2 side-production (<1%). Such unusual product distributions, integrating precursors for synthetic fuels and liquid platform chemicals, might be desired to diversify the scope and improve the economics of small-scale gas- and biomass-to-liquid processes.This article has not yet been cited by other publications.

ChemInform Abstract: Development of Novel Catalysts for Fischer—Tropsch Synthesis: Tuning the Product Selectivity

Direct Production of Hydrocarbons by Fischer-Tropsch Synthesis Using Newly Designed Catalysts

Fischer–Tropsch Synthesis Catalysts for Selective Production of Diesel Fraction

ChemInform Abstract: Fischer—Tropsch Synthesis over Molecular Sieve Supported Catalysts

Integrated tuneable synthesis of liquid fuels via Fischer–Tropsch technology

Kinetics and Selectivity of the Fischer–Tropsch Synthesis: A Literature Review

Review of CO2 selectivity and its control in the Fischer Tropsch Synthesis to value-added chemicals

Insights into Fischer–Tropsch catalysis: current perspectives, mechanisms, and emerging trends in energy research

Kinetics and Selectivity Study of Fischer–Tropsch Synthesis to C5+ Hydrocarbons: A Review

Catalyst design for maximizing C5+ yields during Fischer-Tropsch synthesis

Insights into Hägg Iron-Carbide-Catalyzed Fischer–Tropsch Synthesis: Suppression of CH4 Formation and Enhancement of C–C Coupling on χ-Fe5C2 (510)

Nanostructured Catalyst for Fischer-Tropsch Synthesis: Nanostructured Catalyst for Fischer-Tropsch Synthesis

Development of direct conversion of syngas to unsaturated hydrocarbons based on Fischer-Tropsch route

Design of Cobalt Fischer–Tropsch Catalysts for the Combined Production of Liquid Fuels and Olefin Chemicals from Hydrogen-Rich Syngas

Modified fischer-tropsch synthesis: A review of highly selective catalysts for yielding olefins and higher hydrocarbons

Quantitative Determination of C–C Coupling Mechanisms and Detailed Analyses on the Activity and Selectivity for Fischer–Tropsch Synthesis on Co(0001): Microkinetic Modeling with Coverage Effects

CO2 Hydrogenation to Hydrocarbons over Fe‐Based Catalysts: Status and Recent Developments

New horizon in C1 chemistry: breaking the selectivity limitation in transformation of syngas and hydrogenation of CO2 into hydrocarbon chemicals and fuels

Fischer–Tropsch synthesis process development: steps from fundamentals to industrial practices

Tuning selectivity in low-temperature Fischer-Tropsch synthesis by applying gas recycle mode

Recent Advances in Thermocatalytic Hydrogenation of Carbon Dioxide to Light Olefins and Liquid Fuels Via Modified Fischer-Tropsch Pathway