Abstract:In this work, the polypyrrole modified with copper phthalocyanine‑3,4′,4″,4‴‑tetrasulfonic acid tetrasodium salt (CuPcTs), named as c-PPy, was mixed with different carbon nanomaterials (single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs), graphene (G), graphene oxide (GO), signal-walled carbon nanohorns (CNH)) to investigate the influence on the capacitance performance. Herein, compared with the specific capacitance of c-PPy, the c-PPy/SWCNTs exhibited the maximum specific capacitance according to cyclic voltammetry (CV) curves at the scan rate of 1 to 100mVs−1 and the maximum specific capacitance was 238Fg−1 @ 1mVs−1. The c-PPy/MWCNTs exhibited the highest specific capacitance according to galvanostatic charge/discharge (GCD) characteristics at the current density of 0.1 to 1Ag−1, while the c-PPy/SWCNTs exhibited the highest specific capacitance at the current density of 1 to 10Ag−1. The capacitance performance of c-PPy/G hybrid electrodes was larger than that of c-PPy electrode, while that of c-PPy/GO and c-PPy/CNH hybrid electrodes was smaller. And the specific capacitance of c-PPy/SWCNTs hybrid electrodes was slightly decreased at high current densities and scan rates. The capacitance retention of c-PPy/MWCNTs and c-PPy/SWCMTs hybrid electrodes was approximately 80% and 75% (after 6000cycles). It was assumed that the crosslink of CNTs was overlapped with c-PPy in c-PPy/CNTs hybrid electrodes to construct a three dimension (3D) porous conductive network to provide ion diffusion channels, electron transport pathways, high specific surface area and active sites. The cowered G played a slightly positive influence on the construction of continuous conductive c-PPy network, while the relative flat GO had a very negative impact. The particle-like CNH was not tightly adhered to the fiber-like c-PPy, which made the fluffy hybrid nanostructure. Therefore, the c-PPy/SWCNTs can be used as the active electrode of high-capacity energy storage devices.

Polypyrrole doped with dodecyl benzene sulfonate electrodeposited on carbon fibers for flexible capacitors with high-performance

Flexible Electrochemical Capacitors Based on Polypyrrole/carbon Fibers Via Chemical Polymerization of Pyrrole Vapor

Performance of Flexible Capacitors Based on Polypyrrole/Carbon Fiber Electrochemically Prepared from Various Phosphate Electrolytes

Core-shell structured carbon nanofibers yarn@polypyrrole@graphene for high performance all-solid-state fiber supercapacitors

Flexible and Compressible Electrochemical Capacitors Based on Polypyrrole/carbon Fibers Integrated into Sponge

Preparation of the Flexible Polypyrrole/Polypropylene Composite Fibrous Film for Electrochemical Capacitor

Polypyrrole/Organic Sulfonic Acid Coated Activated Carbon Fiber Felt as Flexible Supercapacitor with High-performance

Fabrication on the Flexible Supercapacitor Based on the Polypyrrole Deposited on Polyethylene/Polypropylene Non-Woven Film

Polypyrrole film based flexible supercapacitor: mechanistic insight into influence of acid dopants on electrochemical performance

Stabilities of Flexible Electrochemical Capacitors Based on Polypyrrole/Carbon Fibers in Different Gel Electrolytes

Preparation and Capacitive Property of Polypyrrole Deposited on the Flexible Polypropylene Fibrous Films

Semitransparent, Flexible Electrochemical Capacitors with Excellent Stability Fabricated with Polypyrrole–titanium Mesh Electrodes

Flexible Electrodes Based on Polypyrrole/manganese Dioxide/polypropylene Fibrous Membrane Composite for Supercapacitor

The Enhanced Capacitance Performance of the Modified Polypyrrole with the Mixture of Carbon Nanomaterials

Design and fabrication of high performance flexible supercapacitor with polypyrrole@carbon fiber yarn electrode and redox active dopants

High Specific Capacitance Cotton Fiber Electrode Enhanced with PPy and MXene by in Situ Hybrid Polymerization.

A Free-Standing Polymer Polypyrrole/Cellulose Composite Film via Spatial-Confined Interfacial Electrodeposition for Flexible Supercapacitors

Toward a high specific power and high stability polypyrrole supercapacitors

A Porous and Interconnected Polypyrrole Film with High Conductivity and Ion Accessibility As Electrode for Flexible All‐Solid‐State Supercapacitors

Hierarchically Interconnected Conducting Polymer Hybrid Fiber with High Specific Capacitance for Flexible Fiber-Shaped Supercapacitor

Extremely Stable Polypyrrole Achieved from Molecular Ordering for Highly Flexible Supercapacitors.