Abstract:Background The article delineates a strategy for detecting ascorbic acid (AA) through the use of iron oxide (Fe₂O₃) nanoparticles on an electrode. The Fe₂O₃ nanoparticles demonstrated effective electrocatalysis in the oxidation of AA, resulting in increased peak currents. The sensor showcased a wide linear detection range, a low detection limit, and high selectivity towards interferents, making it suitable for accurate AA measurement in food analysis and medical diagnostics applications. This emphasizes the potential of Fe₂O₃ nanoparticle-based sensors for precise AA detection. Aim The primary aim of this research is to develop an electrochemical sensing technique for the identification of ascorbic acid, with the use of Fe₂O₃ nanoparticles as the sensing matrix. Materials and methods The synthesis process involved the utilization of FeCl3.6H2O, ammonia solution, ethanol, and double-distilled water. FeCl3.6H2O was dissolved in ammonia water to produce a brown precipitate for the synthesis of Fe₂O₃ nanoparticles. Subsequently, the brown precipitate underwent hydrothermal treatment at 180 °C, resulting in the formation of a red product. Following centrifugation, washing, and drying steps, Fe₂O₃ nanoparticles were successfully synthesized. These nanoparticles were then utilized to modify the glassy carbon electrode (GCE). Prior to the modification, the GCE underwent polishing and cleaning procedures, after which it was coated with a suspension containing 5 mg of Fe₂O₃ nanoparticles in 10 mL of ethanol. The coated electrode was dried and deemed ready for application in electrochemical sensing. Results The hydrothermal method was employed in this research to synthesize Fe₂O₃ nanoparticles, which were subsequently subjected to a series of experiments to evaluate their electrochemical sensing capabilities. The resulting Fe₂O₃ nanoparticles were determined to possess a high level of purity and a crystalline structure through various analyses, including field emission-scanning electron microscopy (FE-SEM), cyclic voltammetric testing, X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectroscopy analysis, differential pulse voltammetry (DPV), and the current response of the Fe₂O₃-modified electrode towards ascorbic acid. The morphology of the Fe₂O₃ nanoparticles was observed to be uniform. The synthesized particles successfully fulfilled the study's objective by exhibiting remarkably sensitive and selective sensitivity towards ascorbic acid. Conclusion Our study underscores the potential of utilizing Fe₂O₃ nanoparticle-based electrochemical sensing to detect ascorbic acid, as evidenced by the notably high sensitivity of ascorbic acid towards Fe₂O₃ nanoparticles. The distinctive properties of Fe₂O₃ nanoparticles, which include their large surface area, efficient electron transport, and straightforward manufacturing process, significantly enhance the sensor's performance. Further research is crucial to exploring the wide-ranging applications of the sensor in fields such as food safety, environmental monitoring, and biological diagnostics and to overcome any existing limitations.

Differential Pulse Voltammetric Determination of Ascorbic Acid in the Presence of Folic Acid at Electro-Deposited NiO/graphene Composite Film Modified Electrode

Preparation of a NiO/g-C3N4 Composite Modified Electrode and Electrocatalytic Detection of Ascorbic Acid

Electrochemical sensor based on Ni/reduced graphene oxide nanohybrids for selective detection of ascorbic acid

Electrochemical sensor based on carbon-supported NiCoO2 nanoparticles for selective detection of ascorbic acid

A Novel Electrochemical Aptasensor Based on Polyaniline and Gold Nanoparticles for Ultrasensitive and Selective Detection of Ascorbic Acid.

Graphitic carbon nitride nanosheets doped graphene oxide for electrochemical simultaneous determination of ascorbic acid, dopamine and uric acid

The Electrochemical Behavior of Nafion/Reduced Graphene Oxide Modified Carbon Electrode Surface and Its Application to Ascorbic Acid Determination

A novel electrochemical biosensor for the determination of dopamine and ascorbic acid based on graphene oxide /poly(aniline-co-thionine) nanocomposite

An Electrochemical Ascorbic Acid Sensor Based on Palladium Nanoparticles Supported on Graphene Oxide

Electrodeposited NiO/graphene Oxide Nanocomposite: an Enhanced Voltammetric Sensing Platform for Highly Sensitive Detection of Uric Acid, Dopamine and Ascorbic Acid

Electrocatalytic Oxidation Of Ascorbic Acid On The Al Electrode Modified With Nano-Sized Nickel Hexacyanoferrate

Application of Nanosized Gold and Graphene Modified Carbon Ionic Liquid Electrode for the Sensitive Electrochemical Determination of Folic Acid

Copper Nanowires Modified with Graphene Oxide Nanosheets for Simultaneous Voltammetric Determination of Ascorbic Acid, Dopamine and Acetaminophen

Hydrothermal Synthesis of Fe2O3/graphene Nanocomposite for Selective Determination of Ascorbic Acid in the Presence of Uric Acid

Novel and Extremely Sensitive NiAl2O4-NiO Nanostructures on an ITO Sensing Electrode for Enhanced Detection of Ascorbic Acid

A novel paper-based electrochemical device modified with Ni-doped TiO 2 nanocrystals-decorated graphene oxide for ascorbic acid detection

A Novel Electrochemical Sensor Based on Self-Assembled Platinum Nanochains - Multi-walled Carbon Nanotubes-Graphene Nanoparticles Composite for Simultaneous Determination of Dopamine and Ascorbic Acid

Synthesis of Au/Graphene Oxide Composites for Selective and Sensitive Electrochemical Detection of Ascorbic Acid

Electrochemical Detection of Ascorbic Acid by Fe₂O₃ Nanoparticles Modified Glassy Carbon Electrode

An electrochemical sensor based on the modification of platinum nanoparticles and ZIF-8 membrane for the detection of ascorbic acid

Electrochemical Deposition of Reduced Graphene Oxide Decorated with Silver and Nickel Oxide Nanoparticles for Quantification of Ascorbic Acid in Bottled Fruit Juice and Vitamin C Tablet