Abstract:The paper prepares a novel MnOx/Si@C anode utilized in lithium‐ion batteries mainly via in situ thermal reduction method, with heterojunction‐containing MnOx nanoparticles (MnO/Mn3O4) as the efficient ionic conductor. The optimized MnOx/Si@C composite exhibits exceptional cycling stability, delivering a specific capacity of 1106.59 mAh·g−1 at 1 A·g−1 over 1000 cycles with a capacity retention of 71.09%. The rapid development of alternative energy vehicles has raised higher requirements for electrode materials. Silicon, with superhigh specific capacity, is highly anticipated in the field of lithium‐ion batteries (LIBs). Unfortunately, the original drawbacks of serious volumetric effect and poor conductivity have confined its commercial steps severely. Herein, a novel composite, based on submicron silicon flakes embedded into carbon shell, with heterojunction‐bearing MnOx nanoparticles, is designed and synthesized successfully via sanding process and in situ thermal reduction methods. The results of electrochemical performance tests and related fitting data show that the presence of MnOx particles facilitates rapid Li+ transport and reduces the impedance associated with Li+ diffusion from the surface to the inner core of the MnOx/Si@C material. The two‐dimensional (2D) silicon flakes and uniform carbon shell have positive influence on structural stability and electronic conductivity. Benefit from the rational design, the optimized MnOx/Si@C composite delivers an outstanding cycling stability of 1106.59 mAh·g−1 at 1 A·g−1 over 1000 cycles with a capacity retention of 71.09%. Besides, the goal material possesses a lithium‐ion diffusion coefficient of ≈1.04×10−9 cm2·s−1. This work provides a reference for the mass preparation of advanced anode materials for lithium‐ion batteries.

High performance Li 2 MnSiO 4 prepared in molten KCl–NaCl for rechargeable lithium ion batteries

High-performance Carbon-Coated LiMnPO4 Nanocomposites by Facile Two-Step Solid-State Synthesis for Lithium-Ion Battery

Synthesis of LiMn1/3Ni1/3Co1/3O2 in Molten KCl for Rechargeable Lithium-Ion Batteries

Metal-organic Frameworks-Derived CoMOF-D@Si@C Core-Shell Structure for High-Performance Lithium-Ion Battery Anode

Synthesis and Characterization of High Capacity Li2MnSiO4/C Cathode Material for Lithium-Ion Battery

Efficient Ionic Conductor Anode Materials with Heterojunction Structure of MnOx/Si@C Utilized in Lithium‐Ion Batteries

General synthesis of xLi2MnO3·(1 - X)LiMn 1/3Ni1/3Co1/3O2 nanomaterials by a molten-salt method: Towards a high capacity and high power cathode for rechargeable lithium batteries

MgFeSiO4 Prepared Via a Molten Salt Method As a New Cathode Material for Rechargeable Magnesium Batteries

Molten salt synthesis of KCl-preintercalated C3N4 nanosheets with abundant pyridinic-N as a superior anode with 10 K cycles in lithium ion battery

Hollow spherical 0.5Li2MnO3·0.5LiMn1/3Ni1/3Co1/3O2 prepared by facile molten salt method for enhanced long-cycle and rate capability of lithium-ion batteries

The Enhanced Electrochemical Performance of Nanocrystalline Li[Li 0.26 Ni 0.11 Mn 0.63 ]O 2 Synthesized by the Molten-Salt Method for Li-ion batteries

Morphology and Electrochemical Performance of Li[Li0.2mn0.54ni0.13co0.13]O-2 Cathode Materials Treated in Molten Salts

Synthesis of carbon nanotubes-supported porous silicon microparticles in low-temperature molten salt for high-performance Li-ion battery anodes

Molten Salt Synthesis and High-Performance of Nanocrystalline Li-rich Cathode Materials

High-performance Self-Organized Si Nanocomposite Anode for Lithium-Ion Batteries

Turning commercial MnO2 (≥85 wt%) into high-crystallized K+-doped LiMn2O4 cathode with superior structural stability by a low-temperature molten salt method

Lithium-Rich Li1.2ni0.13co0.13mn0.54o2 Oxide Coated By Li3po4 And Carbon Nanocomposite Layers As High Performance Cathode Materials For Lithium Ion Batteries

Annihilating the Formation of Silicon Carbide: Molten Salt Electrolysis of Carbon–Silica Composite to Prepare the Carbon–Silicon Hybrid for Lithium‐Ion Battery Anode

Molten salt assisted synthesis of Si/C nanocomposite derived from palygorskite and sodium alginate for electrochemical lithium storage

Li2MnSiO4/Carbon Composite Nanofibers as a High-Capacity Cathode Material for Li-Ion Batteries

Long-Term Stable Hollowed Silicon for Li-Ion Batteries Based on an Improved Low-Temperature Molten Salt Strategy