Nanoarchitectured Graphene/CNT@Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium‐Sulfur Batteries
hongjie peng,jiaqi huang,mengqiang zhao,qiang zhang,xinbing cheng,xinyan liu,weizhong qian,fei wei
DOI: https://doi.org/10.1002/adfm.201303296
IF: 19
2014-01-01
Advanced Functional Materials
Abstract:The sp(2)-hybridizednanocarbon (e.g., carbon nanotubes (CNTs) and graphene) exhibits extraordinary mechanical strength and electrical conductivity but limited external accessible surface area and a small amount of pores, while nanostructured porous carbon affords a huge surface area and abundant pore structures but very poor electrical conductance. Herein the rational hybridization of the sp(2) nanocarbon and nanostructured porous carbon into hierarchical all-carbon nanoarchitectures is demonstrated, with full inherited advantages of the component materials. The sp(2) graphene/CNT interlinked networks give the composites good electrical conductivity and a robust framework, while the meso-/microporous carbon and the interlamellar compartment between the opposite graphene accommodate sulfur and polysulfides. The strong confinement induced by micro-/mesopores of all-carbon nanoarchitectures renders the transformation of S 8 crystal into amorphous cyclo-S-8 molecular clusters, restraining the shuttle phenomenon for high capacity retention of a lithium-sulfur cell. Therefore, the composite cathode with an ultrahigh specific capacity of 1121 mAh g(-1) at 0.5 C, a favorable high-rate capability of 809 mAh g(-1) at 10 C, a very low capacity decay of 0.12% per cycle, and an impressive cycling stability of 877 mAh g(-1) after 150 cycles at 1 C. As sulfur loading increases from 50 wt% to 77 wt%, high capacities of 970, 914, and 613 mAh g(-1) are still available at current densities of 0.5, 1, and 5 C, respectively. Based on the total mass of packaged devices, gravimetric energy density of GSH@APC-S//Li cell is expected to be 400 Wh kg(-1) at a power density of 10 000 W kg(-1), matching the level of engine driven systems.