Abstract:Azo dyes are the most widely used synthetic dyes in the printing and dyeing process. However, the discharge of untreated azo dyes poses a potential threat to aqueous ecosystems and human health. Herein, we fabricated a novel heterogeneous catalyst: activated-carbon-fiber-supported ferric alginate (FeAlg-ACF). Together with peroxymonosulfate (PMS) and visible light, this photocatalytic oxidation system was used to remove an azo dye—azophloxine. The results indicated that the proposed catalytic oxidation system can remove 100% of azophloxine within 24 min, while under the same system, the removal rates were only 92% and 84% when ferric alginate was replaced with ferric citrate and ferric oxalate, respectively, which showed the superiority of FeAlg-ACF. The degradation of azophloxine is achieved by the active radicals (SO4•− and •OH) released from PMS and persistent free radicals from activated carbon fiber. Moreover, due to ferric alginate’s highly intrinsic photosensitivity, visible radiation can further enhance the ligand-to-metal charge transfer (LMCT) processes. After 24 min of treatment, the total organic carbon of the azophloxine solution (50 μmol/L) decreased from 1.82 mg/L to 79.3 μg/L and the concentration of nitrate ions increased from 0.3 mg/L to 8.6 mg/L. That is, up to 93.5% of azophloxine molecules were completely degraded into inorganic compounds. Consequently, potential secondary contamination by intermediate organic products during catalytic degradation was prohibited. The azophloxine removal ratio was kept almost constant after seven cycles, indicating the recyclability and longevity of this system. Furthermore, the azophloxine removal was still promising at high concentrations of Cl−, HCO3−, and CO32−. Therefore, our proposed system is potentially effective at removing dye pollutants from seawater. It provides a feasible method for the development of efficient and environmentally friendly PMS activation technology combined with FeAlg-ACF, which has significant academic and application value.

Rapid Degradation of Azo Dye by Fe‐Based Metallic Glass Powder

A Zn-Ca-Based Metallic Glass Composite Material for Rapid Degradation of Azo Dyes

Excellent Degradation Performance of the Fe78Si11B9P2 Metallic Glass in Azo Dye Treatment

Fast Degradation of Azo Dyes by In Situ Mg-Zn-Ca-Sr Metallic Glass Matrix Composite

Photothermal Degradation of Triphenylmethane Dye Wastewater by Fe3O4@C-laccase

Role of Nanocrystallites of Al-Based Glasses and H2O2 in Degradation Azo Dyes

An efficient CuZr-based metallic glasses electrode material for electrocatalytic degradation of azo dyes

Porous composite architecture bestows Fe-based glassy alloy with high and ultra-durable degradation activity in decomposing azo dye.

Preparation, characterization and application of Fe72Cu1Co5Si9B13 metallic glass catalyst in degradation of azo dyes

Rapid Removal of Azophloxine Via Catalytic Degradation by A Novel Heterogeneous Catalyst under Visible Light

Influence of inorganic ions on degradation capability of Fe-based metallic glass towards dyeing wastewater remediation

Degradation mechanism of acid orange II in persulfate/Fe-based metallic glass system

Improving the Degradation Efficiency for the Azo Dye of Fe82Si2.5B12P2.5C Alloy Via Heat Treatment

Removal of acid orange II azo dyes using Fe-based metallic glass catalysts by Fenton-like process

Catalyzed Degradation of Azo Dyes under Ambient Conditions

Development of a Novel High-Entropy Alloy with Eminent Efficiency of Degrading Azo Dye Solutions

Effect of Residual Stress on Azo Dye Degradation Capability of Fe-based Metallic Glass

Synergistic Effect Between Pyrite and Fe-based Metallic Glass for the Removal of Azo Dyes in Wastewater

Rapid degradation of Direct Blue dye by Co-based amorphous alloy wire

Enhancing the acid orange dye degradation efficiency of Mg-based glassy alloys with introducing porous structure and zinc oxide

Enhanced Degradation Performance of Fe75B12.5Si12.5 Amorphous Alloys on Azo Dye