Abstract:To understand the influence of support materials on the reactivity of catalysts, four nickel-based catalysts supported on different materials (ZrO2, TiO2, Nb2O5, and Al2O3) were developed and investigated in the carbon nanotubes production from catalytic pyrolysis of polyethylene using two-stage fixed bed reactor. The results showed that the Ni/Al2O3 catalyst generated the highest carbon material yield of 36.5 wt%, while the order of carbon material yield was Ni/Al2O3 > Ni/TiO2 > Ni/ZrO2 > Ni/Nb2O5. To explore the correlation between catalysts properties and carbon products, the essential structural characteristics of fresh catalyst and reacted catalyst were analyzed by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (TEM), temperature program oxidation (TPO), nitrogen adsorption measure-ments and Raman spectroscopy. The Ni/Al2O3 catalyst with the highest surface area, abundant pore structure, and moderate metal-support interaction promoted the decomposition of pyrolysis volatiles to produce carbon nanomaterials, which were consist of carbon nanotubes (CNTs). CNTs are the main component of carbon ma-terials produced, accounting for a relatively high proportion. In comparison, the large metal active particles and weak metal-support interaction of Ni/TiO2 catalyst had a negative impact on the formation of CNTs, generating many fishbone like carbon nanofibers (CNFs). Moreover, the poor pore structure and larger metal active particles for Ni/ZrO2 and Ni/Nb2O5 catalyst led to a low carbon deposition yield and poor quality of CNTs. The results provide valuable data and theoretical support for the research on the preparation of valuable carbon nanotubes from waste plastics.

The growth of carbon nanotubes in aluminum powders by the catalytic pyrolysis of polyethylene glycol

Preparation and Reaction Kinetics of Carbon Nanotubes/Aluminum Composite Powders Using Polymer Pyrolysis Method

Synthesis of carbon nanotube/aluminium composite powders by polymer pyrolysis chemical vapor deposition

In-situ Homogeneous Synthesis of Carbon Nanotubes on Aluminum Matrix and Properties of Their Composites

An Approach to the Uniform Dispersion of A High Volume Fraction of Carbon Nanotubes in Aluminum Powder

The Use of Flake Powder Metallurgy to Produce Carbon Nanotube (cnt)/aluminum Composites with a Homogenous CNT Distribution

Mechanism of carbon nanotube growth in expanded graphite via catalytic pyrolysis reaction using carbores P as a carbon source

Study of aluminum powder as transition metal catalyst carrier for CVD synthesis of carbon nanotubes

Synthesis of uniformly dispersed carbon nanotube reinforcement in Al powder for preparing reinforced Al composites

Preferential Growth of Carbon Nanotubes/Nanofibers Using Lithographically Patterned Catalysts

Growth Of High-Quality Single-Wall Carbon Nanotubes Without Amorphous Carbon Formation

Facile synthesis of homogeneously dispersed carbon nanotubes on TC4 alloy powder by in-situ CVD and its growth behavior

Growth of Radially Aligned Porous Carbon Nanotube Arrays on Pyrolytic Carbon Coated Carbon Fibers

Dispersion-Enhanced Supported Pd Catalysts for Efficient Growth of Carbon Nanotubes Through Chemical Vapor Deposition

Carbon nanotubes production from catalytic pyrolysis of polyethylene over nickel-based catalysts: The influence of support materials

Strengthening efficiency competition between carbon nanotubes (CNTs) and in-situ Al<sub>4</sub>C<sub>3</sub> nanorods in CNTs/Al composites influenced by alumina characteristics

An Approach to Obtaining Homogeneously Dispersed Carbon Nanotubes in Al Powders for Preparing Reinforced Al-Matrix Composites

Carbon Nanotubes Grown on Graphite Films as Effective Interface Enhancement for an Aluminum Matrix Laminated Composite in Thermal Management Applications

Control over the Diameter, Length, and Structure of Carbon Nanotube Carpets Using Aluminum Ferrite and Iron Oxide Nanocrystals As Catalyst Precursors

Carbon Nanotubes As a Unique Agent to Fabricate Nanoceramic/metal Composite Powders for Additive Manufacturing

Facile and effective aluminium nitride anti-oxidation coating for carbon nanotubes